Used Felder Ad 731 for sale (108)

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 Pgjdpfx Aeywfbuoahsn In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Pedpfx Aoxxavmoahsgn Machine ready for operation, quiet

Condition: excellent (used), FELDER AD941 Planer-Thicknesser – used Co-opening planer tables, Table opening to the rear, Electric height adjustment, Digital display for planing thickness, Dust-proof ----- Technical data ----- Planing width: 410 mm, Table length: 2,200 mm, Max. chip removal: 5 mm, Pedezcfp Uspfx Aahjgn Diameter of planing shaft: 86 mm, Number of knives: 4 pieces, Swivel range of planing fence: 90-45°, Passage height: 245 mm, Min. workpiece thickness: 3 mm, Feed speed: 6 and 12 m/min, Dust extraction port: 120 mm, Motor power: 5.5 kW, Weight: 610 kg Quality information: - Planer tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked / readjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 Pedpfxew Hckrj Aahegn The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 Pgsdpfxew Hcyge Aahjn The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 441.12.292.18, functionality: fully functional, cutting height (max.): 137 mm, saw blade diameter: 400 mm, spindle speed (max.): 4,000 rpm, table width: 1,300 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 137 mm Max. saw blade diameter: 400 mm Saw blade arbor diameter: 30 mm Parallel fence travel: 1,300 mm Roller table length: 3,200 mm Table width: 1,300 mm Saw unit tilt: 0 - 45° Spindle speed, pre-cutter: 8,200 rpm Pre-cutter saw blade diameter: 120 mm Max. spindle speed: 4,000 rpm MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 11 A Fuse: 16 A Power: 5.5 kW Dust extraction nozzle diameter: 120 mm Dimensions & Weight Pgjdpfx Aaozdz N Eshon Dimensions (L x W x H): 3,250 x 1,000 x 1,100 mm Shipping weight: 650 kg Shipping packages: 1 EQUIPMENT Scoring saw CE marking Controlled axes: Parallel fence, cutting height, swivel, scoring saw height Manually adjustable axes: Parallel fence, cutting height, swivel, scoring saw height

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Pedpfoxlt Shsx Aahsgn Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Pjdjy Sazrepfx Aahogn Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Felder FD-250 slot drilling machine with a maximum drilling depth of 160 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical specifications: - Drilling height adjustment with handwheel: 130 mm - Table size: 550 x 300 mm (expandable with table extensions) Psdjzgr Drjpfx Aahogn - Drilling length: 250 mm - Drilling depth: 160 mm - Clamping device and 90° stop - 3 HP (2.2 kW) motor, 400 volts The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: Bench drill, drilling machine, drill, slot, drilling Reference: R-D1618

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel - Degree indicator for swivel with digital display - Dovetail and T-slot table Z - Anodized table, length 1000 mm - Milling stop 240 - Milling stop rails 450, anodized aluminum Pedezb Sadjpfx Aahogn - with 3-roller feed mechanism Availability: short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Pedpfxew I H Rkj Aahsgn Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Pedpfxerubg Ho Aahjgn

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: CE marking, Hello, I am selling a Felder Findustry 1353 wide belt sanding machine. Year of manufacture: 2020. Commissioned: March 2021. Specifications: 1. Spiral roller planing unit (22 kW) 2. Calibrating roller unit (18 kW) 3. Combination unit with backing pad (15 kW) Steel pressure pads between the units Psdpfx Aezg Etyjahogn Dust extraction on units 2 and 3 Motor overload protection Price: €40,000 We are selling the entire machinery park. I will send the detailed machine specifications by email.

Condition: ready for operation (used), Year of construction: 2022, Panel saw manufactured in 2022. This FELDER K 945S features a maximum cutting height of 155 mm and a maximum cutting width of 1250 mm. It includes a sliding table with a cutting length of 2800 mm and a powerful 5.5 kW main saw motor. If you are looking to get high-quality cutting capabilities, consider the FELDER K 945S panel saw we have for sale. Contact us for further details. • FELDER K 945 S sliding table saw • Manual blade angle adjustment with angle display and handwheel • Tilting saw unit 90°–45° • Blade diameter range: 250–450 mm • Maximum cutting height: 155 mm • Electric height adjustment • Maximum cutting width: 1250 mm • Main saw motor 5.5 kW (7.5 HP), 3x400 V, soft start, CE brake • Three spindle speeds: 3500 / 4500 / 5500 rpm • PCS (Preventive Contact System) safety system with optical status indicator; resettable after activation • Antistatic belt for PCS system • Sliding table, cutting length 2800 mm, anodized aluminum • 10-year warranty on the X-Roll sliding table system • Parallel fence with round guide bar, D = 50 mm • Rip fence 2600 mm with clamping system for extension table 1300/1500 • Extension table for cutting lengths 2500–3200 mm • Support surface: 1150 x 640 mm • Crosscut fence 3200 mm with 2 flip stops • Overhead guard for 1250 mm cutting width with 100 mm dust extraction connection • Machine stand for K 945 S, cast iron saw table; operating tools included • User manual in Czech • Additional warranty: 3 years on machine parts (valid when commissioned by an authorized FELDER technician) • Transport packaging for sliding table • Standard pallet: 2100 x 1500 x 1500 mm Additional equipment • Dust extraction system: • Mobile dust extractor AF 22 • 4.0 HP (3.0 kW), 3x400 V, 50/60 Hz • Standard dust filter • Connection ports: 120 mm and 80 mm • Dust extraction hoses: • 4 x industrial extraction hose H/SE Ø120 mm • 4 x industrial extraction hose H/SE Ø100 mm • Heavy-duty, abrasion-resistant, flame-retardant; smooth internal surface • Spare parts included: • Adjustable support rail (106ND) • Cross roller rail plate (Fen-Grau) • Clamp rail lower section Podpfx Aszdka Teahogn • Compression spring • Clamp rail upper section • Additional machine spare part (222MB)

Condition: excellent (used), Felder TEMPORA F400 edge banding machine Pre-milling cutters, Glue application via roller, Replaceable tank Tank capacity 1.5 kg Heating time 10 min Pneumatic guillotine for pre-trimming Liquids Ready-to-use trimming balls Up-and-down milling unit R1-R2 Corner rounding unit, Profile trimming cutter Flat trimming cutter, Cleaning fluids Polisher, Psdozfiqtspfx Aahegn Max element height 48 mm, Max edge band thickness in roll 3 mm, Feed rate 12 m/min In my opinion, the technical condition is very good. Year: 2024 Machine length: 423 cm Inspection and testing possible on-site.

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Psdpfszcqxuex Aahsgn Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Code: 0404 Brand: HAMMER - FELDER GROUP Model: A3 - 31 - CE Standard 2-works combined machine (Surface Planer/Thickness planer ) for joinery, furniture, joinery fittings, custom-made furniture, plastic and various – CE Standard Technical specifications: Planer width 310 mm Table length 1400 mm Tilting guide 90-45° Three-phase motor v. 380 4 Hp Planer shaft with 3 knives Max chip removal 4 mm Thickness table width 306 mm Pedpfjzcqmfjx Aahsgn Thickness table length 540 mm Min workpiece length 145 mm Thickness feed speed 6 mt/min Suction inlet diameter 120 mm Overall dimensions mm 1450 x 600 x 1000 h Weight kg 290

Condition: used, functionality: fully functional, FELDER RL300 Wood Dust Extractor Specifications: • Condition - used, after a comprehensive inspection • Manufacturer - FELDER • Model - RL300 • Turbine motor power - 9.2 kW • Filter cleaning system with compressed air • Dust collection drawer - 2 x 250 liters • Maximum capacity - 7,880 m3/h • Weight approx. 750 kg • Overall dimensions - 265 x 112 x 225 cm (L x W x H) Additional information: • The machine is in very good technical condition and ready for immediate use. • The fire extinguisher system is not charged. • The photos shown reflect the actual condition of the item being sold. • Possibility to turn on and test the device on site. Psdpfx Aaozd S U Sshsgn • Free training on machine operation (at the company's premises). • The price stated in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using MDD's fleet, courier companies, or external carriers. • We can provide financial support in the form of leasing or a lease loan.

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 Pedpsx Tt Unofx Aahegn - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Podpfxjxg Igij Aahogn

Condition: excellent (used), Felder TEMPORA F800 Edge Bander Liquids Pre-milling cutters, Glue application via roller, Replaceable tank Pneumatic pre-trimming guillotine Liquids Final trimming blades Up-and-down milling unit Corner rounding unit, Profile scraper Cleaning liquids Psdpfx Aaezdtlxehegn Flat scraper, Polishing unit, The machine features NC control Max. element height 60 mm, Max. veneer thickness in roll 3 mm, Feed rate 12 and 20 m/min Central lubrication In my opinion, the technical condition is very good. Year - 2019 Inspection and testing on-site is possible. Purchase via leasing is possible.

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 hp (5.5 kW) Motor voltage: 400 V (50 Hz) Planing width: 410 mm Planing cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg Pgedjh Hp Hyopfx Aahen EURO standard safety guard Standard equipment • Cutterhead with 410 mm planing width • Feed table with table length 1,080 mm • Fence with ruler 1,300 x 170 mm • EURO standard safety guard • 4-knife Felder system cutterhead Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation 2 manual clamps Includes several slot mortising cutters Psdpfxoyvv Ngo Aahegn Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2015, We are selling a Felder Perfect 710, complete with two additional cauldrons. Everything is in working order and ready for immediate use. Included: Podpjzc Ikhofx Aahegn Felder Perfect 710 2 additional cauldrons Please contact me for viewing, further information, or pictures.

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. Podpfsyq Sztox Aahogn 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.