Sliding table saw

Felder kappa automatic 80

Condition: used, Edgebander Holzher Sprint 1317 pre-milling units glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers trimming saws Bodpfxex Tf D Uo Acnedg top-bottom milling units corner rounding profile scraper flat scraper Max. edging height (mm): 50 Edge thickness from roll: 3 mm Feed speed: 10 m/min The machine requires servicing, adjustment, and calibration. It can be started and all units power on, but the front saw does not react to material and the corner rounding unit requires adjustment.

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Bedpfx Acshd N Dajnedg Sale from place.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Bsdpsx Rpgbefx Acnedg Location: Flörsheim

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Bdodpfx Aexg Igiocnjg

Year of construction: 2026, condition: new, Natural rubber Membrane Rubber sheet membrane Bedpfxoi E Hp Ts Acnsdg In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: excellent (used), functionality: fully functional, Four-side planer / Four-sided moulder Compact 23 Max. working width 230 mm Max. working height 125 mm Max. diameter of profile tools 180 mm Surfacing spindle 4 kW Vertical spindle 5.5 kW Upper horizontal spindle 4 kW Lower horizontal spindle 4 kW Machine dimensions 3200 x 1400 x 1600 mm, Weight 1850 kg Bdodpfxot Dk Rxo Acnjg Transport available for an additional charge!

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW Bdodpfxjxmk Ebj Acnsg - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: good (used), Year of construction: 2010, Industrial robot Manufacturer: Kuka Type: KR16L6-2 Year of manufacture: 2010 Reach: 1911 mm Bdsdpstphqhefx Acneg Weight: 240 kg Payload: 6 kg Kuka controller KRC2ed05 Weight 209 kg Processor 2GHz Operating system: WinXP Software version V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7m/15m 22726

Condition: used, Year of construction: 2001, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz Bodpfx Acextakmonedg - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: good (used), Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR5arc Year of manufacture: 2012 Training robot with only 132 operating hours! Reach: 1411 mm Weight: 127 kg Payload: 5 kg KRC4 controller Weight: 145 kg Software version: V8.3 Interface: X11 Beckhoff EtherCat module Kuka touch panel Bedpstq Erdefx Acnodg Kuka connecting cables 22726