Used Feeding Belt for sale (18,976)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dsdpoy Urtfsfx Aayouw Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, functionality: fully functional, Unused, fully functional conveyor belt - with cleats - 4 meters long Duodpfx Aoqup I Nsayow - Conveyor belt 50cm wide

Year of construction: 2020, condition: new, Feeding for granulate and powder Dodefmn Ufopfx Aayouw

Condition: used, Year of construction: 1981, workpiece length 1500 mm stroke 0 mm swing dia. 500 mm total power requirement 30 kW weight of the machine ca. 8 t Dedpjt Hwpmsfx Aayjuw dimensions of the machine ca. m

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, Dusdpfxjzkvd Rj Aayew finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft - 3 metal pressure feed rollers – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany Djdpfezkuawsx Aayouw - 2 roller tables - Used multirip saw - Very good condition Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm Dedpfszktz Hox Aayouw outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed mobile as new

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 1,300 mm, TECHNICAL DETAILS Working width: 1,300 mm EQUIPMENT Vacuum conveyor belt Satinizing roller Djdszktntspfx Aaysuw Brush roller EA dust extraction machine with high-pressure blowing system and rotating nozzles Ionization for statically charged dust Cross-grinding unit with belt blowing device Longitudinal grinding unit, infinitely adjustable speed, with belt blowing device Calibrating roller can be activated via the control panel

Condition: used, Used machine Equipment and technical data: - With 3 rollers - Roller diameter 120 mm Duedezkngkopfx Aaysw - Roller width 60 mm - Roller travel 20 mm - Speeds for left and right rotation: 4-8-11-22 m/min - Voltage 400 V - Motor 0.8 kW - Weight approx. 70 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Belt length: 7330 mm x 150 mm, handwheel adjustment Storage location: Nattheim Duodpfx Aaezkl Ufeysw

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Dodpfozkh Syex Aayouw Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim

Condition: good (used), Code: 0437 Brand: CMC - ITALY Model: CL 300 - CE Standard Belt sanding machine with double gooseneck and 3 motors for joinery, furniture, custom-made furniture, window and door frames, doors, panels, metals, aluminium and various other applications – CE Standard Worktable length 3000 mm Worktable width 800 mm Vertical table stroke 670 mm Transversal table stroke 800 mm Gooseneck depth 700 mm Gooseneck height 250 mm Pulleys diameter 250 mm N° 2-speed motor 3/4 Hp Table lifting/lowering motor 0,5 Hp Suction motor 0,5 Hp Dsdpfx Aezkhmkjayjuw Belt width 120/150 mm Belt length 7850 mm Overall dimensions mm 4000 x 1550 x 1600 h Weight kg 490

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Dujdpev Sthgefx Aayow

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Dedpezkfybefx Aayjuw Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2023, overall weight: 70 kg, terms of delivery: FCA Pegnitz delivery time: on request Dusdpfx Ajzkb Disayjw terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal Dsdpfx Aszi Hwfoaysuw • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore Dedpezi A R Iofx Aaysuw 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: used, Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine sanding machine Combination unit: contact roller and pneumatic sanding pad unit Enormatic Digital thickness display for workpiece height Belt drive motor power approx. 9 kW Dujdpfxozi A Rhs Aayew Contact roller level continuously adjustable via grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine will be PROFESSIONALLY REFURBISHED Available from stock Lieboch

Condition: excellent (used), Sanding belt width: 200 mm Sanding belt length: 1800 mm Table surface area: 230 x 600 mm 5 sanding speeds via stepped pulley drive Dodozi A Slopfx Aayouw Electrical connection: 400 V, 0.55 kW

Condition: ready for operation (used), Sanding belt width: 200 mm Sanding belt length: 1500 mm Table surface area: 240 x 460 mm Dodpfx Aszi A Rzjayjuw 1 belt speed Electrical connection: 380 V Space requirement: 880 x 550 x 1080 mm

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Djdoy Naq Ujpfx Aaysuw Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: good (used), Jaycraft Belt slicer Duodpfxsx Ebkfe Aayjw Stainless belt slicer, belt width 100mm, previously used for cutting carrots, overall length 2900mm, with a spare new belt, mobile, 3Ph

Condition: ready for operation (used), We are selling conveyor belts with dimensions 1.5 x 3 x 0.7 m, ready for use. The price is per unit. ✅ Length: 3 m ✅ Belt width: 0.5 m ✅ We can arrange transportation ✅ A wide selection of conveyor belts is available on site Duedpfx Aaezkx Edoyjw Please contact us. We will help you choose the right conveyor belt for your needs.

Condition: used, Year of construction: 2021, Manufactuer : Immequip Duodpjziqfysfx Aaysw Model : DS-H400 Year : 2021 Type: Belt conveyor Power: 0.12 kW Control box with variable-speed drive Lenght : 180 cm Width : 85 cm Height : 160 cm Conveyor belt width: 400 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and finishing machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding shoe, adjustable sanding unit, and finish sanding. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coatings. Edge banding machine with combination unit and electronic multi-segment pressure beam. Edge segments can be switched on and off. Segment width of the pressure beam 22mm (ideal for intermediate sanding of coatings). Pneumatically adjustable calibration roller, grooved rubber-coated roller with grit compensation. Drive motor 11kW. Infinitely variable belt speed 3 - 15 m/s via frequency inverter. Belt feed speed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device controlled by the workpiece. Constant table height of approx. 950mm by adjusting the upper part of the machine, thus also suitable for integration into sanding lines. Feed belt still has good grip and is in very good condition. Carpet with adjustable vacuum blower, which allows even small parts to be held securely. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking mechanism. Dust extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller, and parameters of the segment sanding shoe. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment and feed activation, eliminating the need for constant re-measuring with calipers. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts included. The four bellows have been replaced. Dujdpfjyxg N Njx Aaysw Excluding the illustrated connection cable. Original paint, only a few spots have been touched up. Very good condition, from a small company. Machine has approx. 1395 operating hours, which is approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. With a large, mobile storage table at the level of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm. Includes various sanding belts from K80 to K400. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this supplier".