Used Evolution for sale (128)

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. Ncodpfxohz Twwo Ahvop This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Ncodpfx Ahsq U N T Rjvep Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. Nodpfxef Epzco Ahvecp The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. Nsdpof Epznjfx Ahvecp It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Ncodpfx Ahof Ih Hcsvjp Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. Ncodpetp H Erofx Ahvop The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. Ncjdpfsxghngex Ahvjp You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2024, CNC lathe machine TCK 50A500 with slant bed, 12 positions turret, hydraulic chuck and tail-stock, chip conveyor, parts catcher - is perfect machine for your turning operations. You can choose it in standard set or add desired option. We can make it with GSK CNC system, Siemens or Fanuc as option Max. Swing over bed -560mm Max. Swing over bed -260mm Max. disc machining diameter - 400mm Max. turning length - 500mm Spindle end type A2-6 Spindle through hole diameter -66mm Ncodpfxet Ef I Uo Ahvjp Bar diameter -55mm Hydraulic chuck -10 inches Spindle limit speed -3000rpm Tail-stock sleeve diameter -70mm Tail-stock sleeve inner hole taper Mohs 5# Tail-stock sleeve stroke -80mm Knife square size -25mm Main motor power -11kW Machine net weight -3000 kg Dimensions (L×W×H) - 2700*2000*2000 mm Please contact us for more details. There are other CNC slant bed lathe machine, CNC flat bed lathe, milling machines,8 CNC milling machines, CNC turning and milling centers, band saws, CNC saws available per request

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Ncoded Etf Eepfx Ahvop

Condition: new, pressure: 20bending length: 900column width: 900daylight: 325stroke lenght (max.): 150messurements (LxWxH): 1760 x 1280 x 2190 mmweight approx.: 1950motor power: 3,8 Ncodpfx Aed H Hh Djhvep

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Njdpfxjd Etfws Ahvocp

Condition: new, pressure: 65bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 5500motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Ncodpfx Ahjd Etfxevsp

Condition: new, pressure: 175bending length: 3570column width: 3570daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5340x2100x2680weight approx.: 11500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Njdpfjd Etf Dex Ahvscp

Condition: new, pressure: 40bending length: 1300column width: 1300daylight: 375stroke lenght (max.): 150messurements (LxWxH): 1880 x 2435 x 2320 mmweight approx.: 3400motor power: 2 x 3,8 Nedpfxed H Hh Hs Ahvocp

Condition: new, pressure: 50bending length: 2040column width: 2040daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3170x1960x2500weight approx.: 4850motor power: 11CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Nodped Etfysfx Ahvocp

Condition: new, pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Njdpfsd Etfzex Ahvjcp

Condition: new, pressure: 200bending length: 4080column width: 4080daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5740x2130x2680weight approx.: 13000motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Nodpfxod Etf Ao Ahvocp

Condition: used, Year of construction: 2025, operating hours: 80 h, Demonstration machine prototype, available immediately: RENNER RSF REvolution 90 D - (5 to 13 bar) frequency-controlled, direct-drive screw compressor with RENNERtronic Plus Touch control with adjustable pressure range from 5 to 13 bar Operating hours: approx. 80 hours Year of manufacture: 2025 Pressure: 6 to 13 bar Rated power: 250 kW Delivery volume: at 5 bar: 6.52 to 17.17 m³/min at 6 bar: 6.50 to 17.11 m³/min at 7 bar: 6.47 to 17.02 m³/min at 8 bar: 6.44 to 15.88 m³/min at 9 bar: 6.39 to 15.10 m³/min at 10 bar: 6.32 to 14.25 m³/min at 13 bar: 6.05 to 11.61 m³/min Noise level: 74 dB(A) Dimensions length x width x height: 1997 x 1493 x 1801 mm Weight: 2850 kg Nsdpsxpwxysfx Ahvocp Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.able.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: Ncjdetxhybopfx Ahvop The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: excellent (used), Complete recycling machinery set Nodpfew Spkzox Ahvscp 2x Dynamic washer K K Recycling s 30 Evolution Sand trap with equipment 1x Dynamic washer s 55 Evolution Conveyor belt x 4 Rotary slotted screen Control cabinet

Condition: new, functionality: fully functional, power: 100 kW (135.96 HP), fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,520 mm, energy efficiency: E, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 7, loading space length: 2,500 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, truck registration, IVECO DAILY 35s140 7 seats Brand new, unregistered vehicle, wheelbase 3,520 mm. !!! 4 UNITS READY FOR IMMEDIATE DELIVERY !!! EURO 6E, 2.3-liter engine, 140 HP, 6-speed manual gearbox, ABS, ESP, ASR, Lane Departure Warning System (LDWS), Intelligent Speed Assist & traffic sign recognition, TPMS (tire pressure monitoring system), central locking, driver and passenger airbags, electric windows, Start&Stop, spare wheel, and other standard equipment. EVOLUTION PACK Automatic climate control, rear parking sensors, My Iveco Infotainment 7" with Android Auto & Apple CarPlay, cruise control, adjustable speed limiter, multifunction steering wheel, configurable 10.25" TFT instrument cluster. Nedpfewdmw Dex Ahvecp Double cab van, semi-glazed, 7 seats, internal load area dimensions: 2.50 x 1.75 x 1.90 m, with coated load floor. Gross vehicle weight 3,500 kg, payload approx. 1,000 kg. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Mosca Evolution strapping tandem comprising a 2023 Sonixs TR-6-Base (stroke count: 115,000) and a 2015 TR-I-6 Pro (stroke count: 1,500,000). 5 mm strap, ultrasonic sealing, automatic strap ejection, selectable number of strapping cycles on the base, and vertical strapping or through-feed function on the TR I 6 Pro. Nodpfx Ahjytr E Rsvecp

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical Data Product number M400-4 Manufacturing year 2009 Height of passage 150 mm Passage width 320 mm Plastic Stainless steel and plastic approved for food contact Power 1.5 kW Power 400 V / 50 Hz Air pressure 8 bar Length 1420 mm Width 650 mm Height 1720 mm Weight 220 kg Machine in perfect condition very little used M400-4 meat tenderizer Josef Koch AG presents the latest evolution in the Pökomat range. The new Steaker is based on the proven and reliable Pökomat technology. It is an efficient and user-friendly solution for the meat industry that meets the demand for softening automatically portioned meat. This machine combines high performance with operation and maintenance. Key features of the M400-4: 396 or 536 precision-sharpened, robust stainless steel knives Two easily replaceable knife supports 10 pneumatically adjustable clamping and pulling units very gentle product processing polyurethane belt-puller removable without tools intelligent clamping system Nodpovimftofx Ahvjcp easy cleaning, hinged carrying system mobile on two polyurethane wheels frequency controlled processing speed holder for storing and changing knives

Condition: used, This Poege Letterpress is a historic museum piece, manufactured in 1900. Currently in storage and located in Germany, this item is a significant artifact from the early days of printing technology. This piece is ideal for collectors, museums, or educational institutions focused on preserving and showcasing the evolution of printing machinery. Ncodpfx Ajvfx Tnshvop Format: Equipment: Letterpress, perfect for Collectors or Museum

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20004, total length: 5,529 mm, total width: 2,147 mm, type of input current: three-phase, product height (max.): 300 mm, product width (max.): 1,020 mm, product width (min.): 300 mm, input voltage: 400 V, input current: 38 A, working height: 900 mm, film width: 1,200 mm, nominal power: 30.5 kW (41.47 HP), air demand: 100 m³/h, STAR EVOLUTION is the new line of continuous side-sealing packaging machines, designed to offer high performance and a simple, intuitive user experience. The machine is ideal for packing and fully sealing various types of products with shrink film, non-shrink film, single-fold or flat foil packaging. Thanks to the flexibility of the machine and the various size options available – together with an intermittent fixed bar, box motion system, simple seal, Euro Slot or easy opening – it covers a very wide range of product packaging. The DMPack STAREVO1100 IT is in outstanding condition, fully serviced, and immediately ready for operation. Njdsxcah Rspfx Ahvocp This reliable and efficient packaging solution comes equipped with a shrink tunnel, ensuring high-quality results for a wide range of applications. The machine also includes additional spare parts, adding extra value and long-term reliability. User manual in English available. A perfect choice for businesses seeking a durable, high-performance packaging system. For more information or inquiries, feel free to contact us.