Cut-to-length slitting machine

LLC Evolutioner SM 1250x8

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Hedpowpku Dofx Ap Hjnt Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range Hnodpsxabc Rofx Ap Hjt * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 Hnedpju Sblwefx Ap Het spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: new, Year of construction: 2026, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Hnsdpjcgmd Uofx Ap Hot Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. Hnjdpjm Twnlofx Ap Hst As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Hedsigm Tcjpfx Ap Hsnt Raumbedarf ca. 2 x 1,9 x 1,95

Condition: new, Year of construction: 2025, We are a production company that is constantly developing dynamically thanks to the professionalism and commitment of our employees. Thanks to the experience we have gained, we are able to offer the best and highest quality solutions in the field of production. Hnedpfxoch Tkve Ap Hjt The folding bench ZGR - 4140 mm 0.8 mm incl. Roller shears and hand folding machine - Working length: 4140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 150 degrees - Folding beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Lifting the top beam in three positions Furnishing: - Roller shear 0.8 + 350 Euro - Degree scale - Angle stop - rear frame to hold the sheet - hand folding machine Price: 6 550 euros Please contact us if you are interested.

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Hnodevl Skgopfx Ap Het Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: new, Year of construction: 2024, Roller for sheet metal unfolding. Working width: 1.250mm. Hnsdedv Duwepfx Ap Hjt

Condition: new, Year of construction: 2026, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, Hnedpjb Na Eqjfx Ap Hot We are looking forward to your contact!