Used Spiral Milling Facility for sale (12,301)

Condition: used, Spiral milling device, dividing head, dividing attachment, rotary table, rotary table -Admission inside: SK40 -Tip height: 65 mm -Distance between centers: 440 mm -Passage: Ø mm -Reversing coupling for: left u. Right spiral -Pivotable for conical spirals: 0 - 45 ° Hjdechyx Tspfx Ag Ionl -Dimensions: 760/430/H310 mm -Weight: 61 kg

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Hsdpfx Agjrfclqs Isnl Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: used, Year of construction: 2009, functionality: fully functional, total length: 7,700 mm, total width: 5,300 mm, total height: 6,000 mm, warranty duration: 3 months, overall weight: 10,000 kg, input voltage: 415 V, type of input current: three-phase, power: 12 kW (16.32 HP), year of last overhaul: 2025, control cabinet height: 1,800 mm, control cabinet width: 1,200 mm, control cabinet length: 350 mm, product height (max.): 97 mm, conveyor belt width: 630 mm, temperature: -35 °C, cooling capacity: 300 kW (407.89 HP), Equipment: documentation/manual, 2No. Heinen Spiral freezers. Used to freeze ready meals from +7°C to 18°C Approximately 2500Kg per hour Max product gap - 97mm Belt width - 630mm Belt type - Omniflex No. of tiers - 32 per spiral Approx. dimensions - 7.7m (L) x 5.3m (W) x 6m (H) Hnsdpfswt Rdmox Ag Iel Photos & full specification to follow. Also available 1No. Complete ammonia plant with 2No. Sabroe compressors. Will sell separately.

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Hnodpjkzkrhefx Ag Iol

Condition: new, Generally overhauled machine Price: 6.000EUR Spiral mixer Capacity: 75 kg flour Hedpfx Aox N Edteg Isnl Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Condition: like new (used), Generally overhauled Price: 5.500EUR Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Hnjdjx N Ed Tjpfx Ag Iol Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: new, Generally overhauled machine Price: 5.000EUR Spiral mixer Capacity: 75 kg flour Hjdex N Edmspfx Ag Ienl Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Condition: excellent (used), Professional TITE-LOCK MILLING CHUCK with SK40 – CT20A mounting – 90 mm. The high-quality quick-clamping TITE-LOCK system ensures exceptional clamping force and working precision, ideal for milling, drilling, and precision machining. . Type: TITE-LOCK MILLING CHUCK . Mounting: SK40 – CT20A . Length: 90 mm . Applications: milling, drilling, CNC machining . Condition: used, fully operational, very good technical condition ✅ Robust and precise industrial tool for professional use on milling machines and machining centers. Excellent rigidity and high tool holding force. Hnodpfx Agsxk T H As Ijl

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. Hnodpfoq Nf S Rsx Ag Iol 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour Hodpfork Ipnsx Ag Ijnl 4. weight: 2500 kg

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously Hnsdpfsx U Efbsx Ag Isl They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Electric Power: 3kW Machine Size: 840x480x1000mm

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Hodpfxjwunmbj Ag Ienl Sold only in whole.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted Hnodpjh S Uhfofx Ag Ijl The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO 50 Travel X-axis: 1,250 mm Travel Y-axis: 1,100 mm Travel Z-axis: 950 mm Travel W-axis: 630 mm Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg Hnjdpfey Hrntjx Ag Iel

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ Turning and Milling Center including GL20II Gantry Loader! TECHNICAL DETAILS Swing diameter over bed: 760 mm Swing diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Center distance: 689 mm Distance chuck to chuck: 625 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70/-50 mm B-axis travel: 640 mm Rapid traverse (X/Y/Z/B): 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm, ASA 8" A2 Maximum sub-spindle speed: 4,500 rpm, ASA 6" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar capacity: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Hsdpfxey Hk Nij Ag Ijnl Control: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm,

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 610555, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 460 mm Travel Z-axis: 510 mm Spindle speed: 60 - 6,000 rpm Tool holder: BT40 Table length: 950 mm Table width: 560 mm MACHINE DETAILS Control: CNC Control system brand: Fanuc Hedoy Rxu Uepfx Ag Ijnl Power: 7.5 kW Number of axes: 3 pcs. Dimensions & Weight Dimensions (L x W x H): 2100 x 2600 x 2600 mm Weight: 3,800 kg Shipping units: 1 pc.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 16090455, travel distance X-axis: 850 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 210 mm, table width: 500 mm, table length: 1,570 mm, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 435 mm Z-axis travel: 210 mm Table length: 1,570 mm Table width: 500 mm Main spindle power: 3.8 kW Number of axes: 3 pcs. MACHINE DETAILS Control: CNC Control manufacturer: Heidenhain Power: 16.0 kW Hodey Rxq Aopfx Ag Ienl Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,800 x 2,300 mm Transport weight: 3,500 kg Transport packages: 3 pcs. EQUIPMENT Tools included External cooling Documentation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 750 mm Z-axis travel: 750 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Hodpfx Ajy Rxqveg Isnl Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,067 h, functionality: fully functional, machine/vehicle number: 122616, travel distance X-axis: 500 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 1,650 mm, controller model: OKUMA OSP P200L, center width: 1,500 mm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 95 mm Travel Z-axis: 1,650 mm Turning diameter over bed: 550 mm Power: 22.0 kW Distance between centers: 1,500 mm Spindle bore: 80 mm Counter spindle speed: 4,500 rpm Tool magazine: 44 positions Tool holder: HSK-F63 MACHINE DETAILS Control: OKUMA OSP P200L Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,800 x 2,900 mm Transport weight: 13,700 kg Shipping packages: 7 units Operating hours: 19,067 h EQUIPMENT Automatic workpiece feeder with controlled arm by Pneumotec Automatic bar feeder by LNS Quick Load Servo III Counter spindle VAC-MB11 Milling head with automatic tool changer Turning turret: 12-position tool changer Chip conveyor Turret head Driven tools Bar loader Three-jaw chuck Tool magazine C-axis Documentation CE marking Hedpjy Rxprofx Ag Ionl

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Hjdsd E A I Nepfx Ag Isnl Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm Hnsdjqa Txqjpfx Ag Ijl spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Hjdpou T Ty Hofx Ag Isnl Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 Hnsdpfx Aonzt A Heg Iel No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Hnodpfxstrhq He Ag Iel Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition