Used Evo for sale (1,824)

Condition: ready for operation (used), Year of construction: 2021, This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information. Ksdpfx Aoxf N Husfiodu Application Types 3D Printing

Condition: used, Year of construction: 2013, operating hours: 15,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Kdsdpsxdbvxsfx Afiju

Year of construction: 2021, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 210000002, Industrial vacuum cleaner with integrated liquid bath separator Dust class H/Type 22 400 volts, 2,200 watts 60 l dirt container Air volume max: 330 m³/h Vacuum pressure max: 240/300 mbar Filter levels: 1st filter level: liquid bath separator 2nd filter level: demister 3rd filter level: VA filter 1m² 4th filter level: H14 filter cartridge 2mEX-protected for use in zone 22 according to EN 60335-2-69 including appendix AA and EN 62487 as well as ATEX 2014/34/EU incl. 3.5 m ESD-PUR suction hose Ø40mm electr. conductive with VA-Kamlock coupling, crack nozzle Serial number 21000002 LxWxH: 83X68X165cm 1.00 piece 072-0401-ESD ESD extraction arm Ø50mm x length 1,500mm, table mounting 030902 certified according to IEC 61340-5-1, 3 joints 1.00 piece ESD flat hood Ø50mm, 300x200mm including hood pipe connector, Kdjdevt Aghepfx Afiou certified according to IEC 61340-5-1 SET: console for extraction arm Ø50mm Material: ST/K

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Kjdpfsxbzyrjx Afiedu

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 225 mm, JUNG HF50 mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines 12 month warranty Kdjdpjbwl Ubsfx Afiou in stock max. grinding range: 600 x 250 mm

Year of construction: 2015, operating hours: 600 h, condition: ready for operation (used), Additional Equipment Roller Cooling This CEFLA Hotmelt SP1-EVO was manufactured in 2015. Ideal for woodworking applications, it ensures reliable performance for your projects. Consider the opportunity to buy this CEFLA Hotmelt SP1-EVO woodworking machine. Contact us for more information. Kdsdpsxpyu Djfx Afieu Application Types Other Woodworking Machinery

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Kdedpoxppv Rsfx Afisu Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Year of construction: 2019, operating hours: 5,353 h, condition: used, Drivetrain Drive: Track Kjdpoxpny Isfx Afijdu Make of engine: Deutz Weights Empty weight: 36.300 kg Functional Dimensions of cargo space: 18600 x 3200 x 3400 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Identification Serial number: K0860165 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Production country: DE Additional information Please contact Jeroen Rijk, Dennis van Loon or Antoon Schroder for more information

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis Kedju Hkb Rjpfx Afisdu C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,207 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, fuel type: gas, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Kdsdpoxpy Absfx Afiju Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 23x9-10 Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 40 - 60% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, heating, STVZO, full cabin, air conditioning, full free lift, safety light, Double bottle holder

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Kdodpfoxnnf Iox Afisu Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 10915551234, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, total height: 2,900 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 100 A Connection: 48 kVA Rapid traverse in B-axis: 40 m/min Rapid traverse in C-axis: 50 m/min Measuring system: Resolution in C, B, X, Y, and Z axes: 0.001 mm Position tolerance in C, B, X, Y, and Z axes: 0.010 (with direct measuring system) Travel range B-axis: 0-161.955° Travel range C-axis: 360° Kdedpfoxninqsx Afiju Max. tool diameter without free adjacent positions: 80 mm Max. tool diameter with adjacent free positions: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight for automatic tool change: 6 kg NC rotary table with swivel axis (C-axis) Clamping surface (rotary axis): 500 x 380 mm T-slot pitch: 63 mm/14h7 Centering bore: 30 mm diameter h6 Max. torque rotary axis: 1491 Nm Max. table plate speed: 50 rpm B-axis: Max. swiveling torque: 1864 Nm Swiveling speed: 40 rpm Swivel range: 0-161.955° Load capacity: approx. 420 kg Max. load positioned in table center: 200 kg Including zero-point clamping system by SCHUNK and clamping rail Rail length: 490 mm Jaw width: 90 mm Including chip conveyor, extraction filter by SARA PICK-UP INFORMATION: Pick-up must be scheduled firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, machine/vehicle number: 26226, Year of construction: 2018, operating hours: 7,104 h, load capacity: 2,000 kg, lifting height: 2,790 mm, free lift: 1,300 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Equipment: sideshift, Device Details: Year of manufacture: 2018 Load capacity: 2,000 kg Lift height: 2,790 mm Displayed operating hours: 7,104 h Free lift: 1,300 mm Mast type: Duplex Mast height: 2,000 mm Length/Width/Height: 2,050 / 1,180 / 2,000 mm Operating weight: 3,503 kg Battery from: 2025 ---- Equipment: * Overhead guard * 3rd valve * Front windscreen * Roof cover * Full free lift * Front working lights Kodpsxpvypofx Afiedu * Rear working lights ---- Attachments: * Sideshift ---- Further device information: Bluespot ---- The operating hours stated are always the current reading from the hour meter. We are happy to offer suitable transport for you. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also available for rental! We are also happy to purchase your OLD equipment. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sales and errors for this offer are expressly reserved. For business customers, the device is sold as-is, not refurbished. All information is supplied without guarantee; errors and changes excepted.

Condition: good (used), Year of construction: 2019, operating hours: 5,380 h, Drivetrain Make of engine: DC13 71A Weights Empty weight: 47.280 kg Functional Dimensions of cargo space: 17340 x 3000 x 3600 cm CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: K0180224 Other information Delivery terms: EXW Production country: DE Ksdpfx Afjxpnyzoiodu Additional information Please contact Jeroen Rijk, Dennis van Loon or Antoon Schroder for more information

Condition: good (used), Year of construction: 2001, Dear Sir or Madam, below we offer you a 5-axis CNC machining center 'DECKEL MAHO' DMU 50 eVo, used, in good condition. Kodew Axahepfx Afiodu

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 14,725 h, load capacity: 5,000 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: diesel, mast type: standard, construction height: 2,870 mm, fork carriage width: 1,500 mm, fork length: 1,200 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 600 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Dual pedal Speed class: 20 Condition: Refurbished, without warranty Technical condition: Good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80–100% Rear tire type: Pneumatic Rear tire size: 250-15 Rear tire condition: 80–100% Description: Handover with new FEM 4.004 inspection including inspection booklet / NEW maintenance. If you have further questions, feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to assist with leasing & financing, as well as delivery at favorable terms upon request. We also accept Linde equipment as a trade-in, even if you do not purchase a machine from us. Kodpoxpyz Rofx Afiedu Indicated operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, Fork positioner, Kaup integrated fork positioner with sideshift 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, road approval (STVZO), full cab, air conditioning, safety light, single pedal, seat heating, LED, Comfort seat with PVC air suspension and seat heating.

Condition: used, functionality: fully functional, machine/vehicle number: H2X394Y03351, Year of construction: 2021, operating hours: 9,126 h, load capacity: 5,000 kg, lifting height: 6,765 mm, free lift: 2,260 mm, fuel type: diesel, mast type: triplex, construction height: 3,176 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X394Y03351 Load centre: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Solid rubber Front tyres condition: New Rear tyres type: Solid rubber Rear tyres condition: New Kjdpfx Afexplaleiodu Sideshift, 3rd valve, 4th valve, rear working light, front working light, heater, full cabin, air conditioning, full free lift, interior mirror, joystick, beacon, windscreen wiper, seat, tow hitch, air-sprung seat

Condition: good (used), Year of construction: 2022, functionality: fully functional, Single-sided edge banding machine for applying edge banding tape with hot-melt adhesive to all four sides of a rectangular panel, including the finishing of the edge tape. TECHNICAL SPECIFICATIONS: • Feed speed: 7 m/min • Panel thickness: 8 – 50 mm • Edge band thickness (strips): 0.4 – 3 mm (optionally 5 mm) • Edge band thickness (roll, incl. covers): 0.4 – 3 mm • Max. cross-section of edge material for trimming: 150 mm² • Roller holder diameter: 700 mm • Max. projection of edge band relative to the panel: 4 (2+2) mm • Min. distance between two panels: 600 mm Kedpfx Ajxpgxvefiodu • Min. panel length (minimum width 100 mm) with edge tape on roll: 160 mm; with edge material in strips: 180 mm • Min. length of edge tape on roll: 200 mm • Min. length of edge material in strips: 220 mm • Min. panel width with edge tape on roll: 110 mm (min. length 210 mm) • Working height: 900 mm • Width for fixed panel support: 615 mm

Condition: ready for operation (used), Year of construction: 2008, Main Drive Kodpfxow E Rnpj Afiodu Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Application Types Milling

Condition: used, machine/vehicle number: 26174, Year of construction: 2018, operating hours: 10,317 h, load capacity: 3,000 kg, lifting height: 3,350 mm, fuel type: diesel, mast type: standard, construction height: 2,340 mm, Equipment: cabin, sideshift, .: 26174 Equipment Details: Year of manufacture: 2018 Lifting capacity: 3,000 kg Lift height: 3,350 mm Indicated operating hours: 10,317 h Mast type: Standard Mast height: 2,340 mm Dimensions (L/W/H): 2,755 / 1,337 / 2,230 mm Operating weight: 4,260 kg ---- Features: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Sideshift * Fork positioner ---- Additional Equipment Information: Kdsdpfx Aow Nh T Ajfiju * Beacon * Radio * Heated seat * Single-pedal operation ---- The hours indicated are generally read from the display. We are happy to offer you suitable transport. A further 250–300 forklifts, attachments, and sweepers available immediately. Also available for rental! We are happy to buy your USED equipment. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade sales, the machine is sold as is, not refurbished. All information provided without guarantee; errors and changes excepted.

Condition: good (used), mileage: 587,967 km, power: 324 kW (440.52 HP), first registration: 11/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Additional Options and Accessories = - Second diesel tank - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Fixed type - Sleeper cab - Central locking = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 11,301 kg, Curb weight: 7,699 kg, Gross weight: 19,000 kg, Total fuel tank capacity: 940 liters, Second diesel tank, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/Cassette, Color: Blue, Heated mirrors, Lighting type: LED lamp, Lane assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine output: 324 kW (434 Hp), Fuel: Diesel, Euro: 6, Transmission type: Optidriver, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 2, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: 12-speed, automatic Axle Configuration Kodpfxsxl Rk Ue Afisdu Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire tread: 8 mm; Right tire tread: 7 mm; Suspension: Leaf spring Axle 2: Dual tires; Left inner tire tread: 15 mm; Left outer tire tread: 15 mm; Right inner tire tread: 18 mm; Right outer tire tread: 15 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 600 x 255 x 406 cm Weights Unladen weight: 7,699 kg Payload: 11,301 kg Gross vehicle weight (GVW): 19,000 kg Interior Number of seats: 2 Condition Technical condition: Good Cosmetic condition: Good Damage: None Number of keys: 2 Financial Information Leasing price: €655 per month (default, 60 months); Please inquire for further details and terms Identification License plate: BB-364-N = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! - Large, fast-changing inventory - Recognizable quality - Good pricing - Reliable business conduct - We speak many languages - We understand our customers - Support with import and transport - (Export) license plates arranged quickly - Expert technical services - The security of "recognizable quality" - And more… Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Kdjdoxn Dhlopfx Afiju Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: used, Year of construction: 2008, x-travel 500 mm Kdjdpfsxluf Aox Afiou y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 total power requirement 50 kVA weight of the machine ca. 6,5 t

Year of construction: 2023, operating hours: 4 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10220, The hyCLEANER® red EVO I cleans different forms of façades, surfaces and materials: very gentle, effective, fast and above all, economic. The machine works with highpressure water and does not need any electrical connection. Both, the glass and the frames are cleaned simultaneously. All water leading elements are made out of stainless steel. Purified-water can be used and the glass surfaces dry up, leaving no streaks behind. A further advantage of hyCLEANER® red EVO I is the running wheels. They do not leave any marks on the surface of the façade - gentle cleaning can be so easy! Kdsdpfx Asxnlz Hsfiou

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01128, Year of construction: 2020, operating hours: 13,899 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, fork length: 1,200 mm, empty load weight: 3,909 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386X01128 Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Good Front tire type: Superelastic Ksdpfxoxnti Ss Afiodu Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery type: PzS Battery year: 2020 Battery condition: 60 - 80% Description: Workshop-inspected with UVV certification Clamping fork, sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, CE certificate, front/rear working lights, BlueSpot rear, side safety bars