Pillar Drilling Machine

IXION BS 40 G

Condition: new, grinding range 2 - 20 mm Djdpjupxkwjfx Akcjcg sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Dedpfx Aet H Ty Uskcecg swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm - Lighting system Dodpfx Aorckw Ijkcjcg - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Dcodpfoharwvex Akcsg Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Dcsdpow D Hi Tofx Akceg

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop Djdpfx Aksvuz T Nocscg - Machine light - Drill chuck

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm With motor: 1.5 kW, 1415 rpm, 380/220V Dsdpfx Aewtdmujkcscg

Year of construction: 2009, condition: used, 1 station piston filler Pneumatic driven 15-785ml dosing now equiped 15-100ml as-is or Dcodpfxef Rkyds Akcog adjusted to customer needs

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 44 l, color: yellow, overall weight: 3,803 kg, tire size: Rubberen rupsbanden 300 mm, tire condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.11 m³, Year of construction: 2025, operating hours: 5 h, Equipment: UVV, additional headlights, adjustable boom, cabin, hydraulics, onboard computer, parking heater, rubber tracks, soot filter, === MAIN SPECIFICATIONS === Year: 2025 Operating hours: 5 h Operating weight: 4,250 kg (B4.1 configuration) Transport weight: approx. 3,803 kg Max. digging depth: 3,497 mm Digging radius: 5,582 mm Bucket capacity: 0.11 m³ Engine manufacturer: Yanmar 3TNV88F Engine power: 18.2 kW Drive: Diesel Type: Crawler excavator (Zero Tail) Quick coupler: No Hydraulic functions: 4 auxiliary circuits (AUX I–V) Cabin: Enclosed Heated cabin: Yes Air conditioning: No Travel speed: 4.7 km/h Tracks: Rubber tracks (300 mm) Counterweight: Yes Overload valve (AUX I): Yes Powertilt circuit (AUX III): Yes Grapple piping (AUX V): Yes Easy Lock preparation (AUX IV): Yes Flat-faced couplers: Yes Dcjdpsxwlkyjfx Akcjg Advanced Overload System: Yes Emission class: Stage V CE certification: Yes === HIGHLIGHTS === • Carefully selected unit with fully verified service history • CE-certified with complete documentation • Only 5 operating hours – practically new • Strong hydraulic performance with 4 auxiliary circuits • Zero Tail design ideal for tight and urban environments • Ready for immediate use === CONDITION === Excellent working condition – fully inspected, serviced, and tested. On-site inspection possible upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable and modern Zero Tail machine from first owner, part of one of Europe’s largest fleets. All units CE-approved, inspected, and ready to operate. Professional support and spare parts available. === DELIVERY === Crane loading available on request. Flexible global transport options tailored to your destination. All logistics managed by Collé Rental & Sales.

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min Dcedpfxjxab R Us Akcsg saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device