Used Edge Gluing Machine for sale (65,201)

Condition: excellent (used), functionality: fully functional, Edge sander Minimax Unilev 150 Gedeyqxutopfx An Rebl Belt dimensions: 150 x 2170 mm Two belt speeds Table adjustable from 0–30 degrees Adjustable sanding height Belt oscillation Motor power: 3.3/2.6 kW CE mark

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii Gjdpfxoyqanbj An Rjbl - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, Gjdpfx Aoyv Da Hjn Robl 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm -Drive: 0.5 kW -Adjustable speed: 1200 - 8000 rpm -Angle: 45° -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner -Dimensions: 490/870/H1150 mm Gedpfjyn N Iljx An Rjbl -Weight: 106 kg

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine Godpfx Anod Nzgvs Robl -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Gbodpfxsyvfwro An Rsl Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Gbsdpfoyu If Nex An Rsl Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: used, Year of construction: 1990, Used machine Gbsdeyncpvopfx An Rol Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Gedpfx Answ I U E As Rjbl Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Godpsv R Nk Usfx An Rjbl Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2007, machine/vehicle number: AH/004965, The STEFANI Solution 5400 is a single-sided industrial edge banding machine designed for medium and large production facilities. The SOLUTION model range was conceived as a flexible solution for both stand-alone workstations and integration into automated production lines. SALE ON COMMISSION. Gbedpsynb Nnsfx An Rjl

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty. Gedpfx Anex Avcdo Rsbl

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Gbsdpfxjiuld Do An Rol Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W Gbodpfx Ajvm Efajn Rol PRAWEMA 2006 SYNCHROFINE 205 HS

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard Gjdpfx Anjymfxqo Rebl The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 Gedpefhgzajfx An Rjbl -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm -power supply; 220 V -input power; 0,1 kw -weight; 75kg -dimension; 60c110c132cm

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Standard configuration Extended machine accessories Gbsdpex S Dxbsfx An Rol

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Gsdpfx Anjyt Hkus Rebl

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Gedpfx Asv Sv Enjn Rebl Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg Gbjdpfodz Sq Eox An Rjl

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Gbsdpfx Ajythxmen Rsl Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Serial number: 95.005/6/95 Gbodpfx Aneythu Ij Rol Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), spindle diameter 35 mm manual raising and lowering of spindles with readout spindle speed adjustable: 3000/4500/6000/8000/10000 RPM side carriage for tenoning MAGGI 3-roller feed unit CE marking Gbodpsytf Hhsfx An Rol year: 2008 weight: 525 kg

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3.6 kW (4.89 HP), input voltage: 230 V, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 11 kg, compressed air connection: 6 bar, working height: 65 mm, The perfect zero joint - for laser edgebands / hot-air edgebands / co-extruded edgebands - Up to 65 mm edge height Gedjr H Ealepfx An Rebl - Up to 3 mm edge thickness - Mobile or stationary use - Tool-free changeover - Up to 3 mm edge thickness - approx. 4 min heating time - 230 V / 50 Hz

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Gbjdpfswiv Dkex An Rjl Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500