Used Edge Trimming Machine for sale (67,554)

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Ijdpfxsznu Dws Abneif Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) Iisdpfxjztazfj Abnef HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: excellent (used), Edge trimming machine Working height: 800 mm Iodpfx Abswiwnqjnoif Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Iiodpfx Abjzuwyzenof Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. Iisdpfszr Nkgjx Abnsf • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Ijdpfxou R S Nwe Abnoif Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), 4 kW motor Isdpfszu Ng Tex Abnoif Roller feed system Sanding belt length: 100 cm Working height: 14 cm Table with adjustable angle and height

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A Ijdpfx Aozuyk Nsbnjif - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Isdpfxjv Sv Ens Abneif Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm Iedszuyp Ejpfx Abnsif

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Iiedpfx Abszuyh Usnef Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! Iisdpfjy Sap Ajx Abnef The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Iodpozuykvsfx Abnjif Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Iodpfxjzuyhns Abnoif Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Iodezuyhhopfx Abneif Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2006, - Edge milling unit 2 x 2.2 kW - Combi-melt gluing unit - Automatic edge magazine - Trimming unit 2 x 0.8 kW - Flush trimming unit 2 x 0.7 kW - Fine milling unit 2 x 0.3 kW - 2 quick-change sets for fine milling - Automated copy milling unit 2 x 0.37 kW - 2 pull blades - 2 surface pull blades - 5-way spraying system - Fine buffing unit with cloth disc 2 x 0.2 kW Edge banding machine Manufacturer: OTT Type: Twister Technical data: Glue application: Hot-melt adhesive application roller with simultaneous and counter-rotating action Edge thickness: 0.3-10 mm Workpiece thickness: 8-60 mm Workpiece width: 70 mm - Minimum Workpiece length: 150 mm - Minimum Operating pressure: 6 bar Feed power: 3.0 kW Feed speed: 14-20 m/min. Electrical connection: 3 x 400 V, 50 Hz Extraction: at 20 m/s, 1 x 180 mm diameter = 35 m³/min. Air velocity: 20 m/s - Minimum Compressed air consumption: 300 liters/min. (approximate value) Equipment - Machining units: Joining: - 2 x 2.2 kW, n=14600, 250 Hz, two individually controlled spindles. Combi-melt gluing unit: - Top-mounted gluing unit with interchangeable hopper for processing EVA, PUR hot-melt adhesives, or standard cleaning granules, hopper volume 2.5 l Edge magazine: - Automatic edge magazine with optical monitoring for strip edges in fixed lengths Trimming: - 2 x 0.8 kW, n=12000, 200 Hz, automatic pivoting 0 / 5, 2 HM saw blades, 140 x 3.2 x 16 mm, z=34 Flush trimming: - 2 x 0.7 kW, n=12000, 200 Hz, single-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 Fine milling (chamfer 15 / 30 / 45): - 2 x 0.3 kW, n=12000, 200 Hz, double-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 AWSR (radius R2-R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW, with 2 HM reversible blade cutter heads AR73 x 16 x 16 mm, z=3, R2-R5 Copy milling: - Automated copy milling with two separate spindles for machining end faces and longitudinal radii. Motor power: 2 x 0.37 kW, 12000 rpm, Tools: R1 - R3 Pull blade: - 2 HM pull bars, automatically adjustable Surface pull blade: - 2 HM pull bars with fine adjustment Iodpozuyifjfx Abneif PU set: - 5-way spraying system, 2 x release agents, 1 x lubricant, 2 x cleaning agents, fine buffing unit with cloth disc Edge finishing: - 2 x 0.2 kW, n=2800, 50 Hz, oscillating brushes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Iiodpsy Exwfjfx Abnjf Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Iodjzt Twtjpfx Abnjif Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked Iisdpoy T D N Asfx Abnjf - Pneumatics checked - Ready for immediate use

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado FÜ + PU SPS-compatible control with 7" TFT color touchscreen display CM-CombiMelt unit for EVA and PUR hot-melt adhesives Pre-milling unit – jointing Fully automatic roll magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush trimming – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper blade Surface scraper blade Iodpfx Aev Sm Hcobnsif Soundproof enclosure with space extraction Cleaning set with 4-way spray system, fine buffing unit, and sliding agent spray equipment First delivery in 2006 Machine has been WORKSHOP TESTED and is in TOP CONDITION The gluing unit was recently fully serviced and wearing parts replaced Technical data: Edge thickness: 0.4 – 8 mm Panel thickness: 8 – 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper blade Buffing unit 3-way spraying system Total connected load: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Available immediately -

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup. Iiodpfxozvfdws Abnjf

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm Iedpfx Aboztbutsneif - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Iijdpfx Aozuyplebnef Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Deburring machine Isdpjb E Dc Hsfx Abneif Manufacturer: Assfalg Model: FS 5 Condition: New machine Speed: 2,800 rpm Max. chamfer width: 3 mm Standard equipment includes: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating manual

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Iisdpfx Ajy Dg N Tebnof Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.