Used Glue Coating Machine for sale (92,661)

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Dwedpfov Sa Utex Adusc Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Dodpfx Adortnv Deujwc

Condition: new, Year of construction: 2025, 1,000 x 1,900 x 2,000 mm powder stove, manufacturer Kigo O.E.! 1 Internal dimension length 2.000 mm 2 Internal width 1.900 mm 3 Internal height 2,000 mm 4 Outer dimension incl. thermoblock length 2,300 mm 5 Outer dimension incl. thermoblock width 2,300 mm 6 Outer dimension incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 Walls 1 set of 1 mm galvanized sheet metal on both sides, outside RAL 5005 9 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 10 Oven floor 2 run-in rails for oven trolleys 11 Temperature 220°C 12 Fans 1 unit 6,000 m³/hour 13 Electric motors 1 pc. 1.1 kW, 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 Hinged doors on one side 2 insulated with rock wool 150mm 70Kg/m² Indirect heating via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 Heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 16 burners 1 oven is electrically heated 1 exhaust air 1 piece device for exhaust air pipe, manual flap guide 2. powder coating booth (open spray booth) The overspray during powder coating is collected by the suction unit. The powder spraying booth is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the cabin. 1 Powder booth dimensions Width 2,454 mm Depth 2,400 mm Height 2,500 mm 2 Fan 1 pc. 6,000 m³/hElectric motor 3.0 kW 3 Filter Φ 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy Dwsdpebqk Nbsfx Aduoc 5 Absolute filter 1 pc. type pocket filter 3. powder coating system Wagner, - Prima Sprint - 1 Dimensions of the Prima Sprint Depth 725 mm Width 480 mm Height 1.100 mm Weight Approx. 39 kg. Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour - Corona hand gun PEM-C4 Ergo - EPG-Sprint control unit - Conveying unit with fluid crown ST 550/10 - Powder injector PI-F1 - Device trolley with agitator table

Condition: like new (used), Year of construction: 2018, operating hours: 1,321 h, functionality: fully functional, Burkle PUR Laminating E.A.S.Y-Line is laminating line suitable for various applications, including manufacture and lamination of panels, coating of panels, manufacture of lightboards, composite boards and insulation elements. Line can be extended with additional working options (not included !) and additionally adjusted to Your production needs - Single-sided coating of PUR and hot melt glues for working widths from 1300 to 1600 mm (double sided and larger widths upon request) - Press calender with solid and welded machine frame - Large-dimensioned bearing, upper roller with precision lifting gear - Application quantity 40 to 120 g/m2 Working Widths 1300 - 1600 mm Dodpexltz Asfx Aduswc Board Lengths 2450 mm, 3050 mm, 3660 mm, 4800 mm

Condition: good (used), Year of construction: 2012, Sigel coating machine Prima V6 Nordson incl pump coating machine incl filter pump S16 used condition, from running operation, overhaul by experts recommended (contact can be arranged) Dwedsn Rym Nopfx Adujc

Year of construction: 2008, condition: used, Operational condition machine! Dodpfxoxlflgs Aduewc - 4 axes - Component height up to 100 mm - 3 valves - 2 tilters for valve inclination - 2 tanks - External programming PC

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Dwodoxhquxepfx Adujc Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2023 Demonstration machine - has never been used in production! 2-roller application machine for applying oil With Cosma's roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden materials, scaffolding timber, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: Dwedpfxswu T Abj Aduec - Dosing roller, 0.37 kW - Rubberized application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height indicator Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: excellent (used), Disc table for glue rollers OSAMA TDM-1300×3000 Set length: 3000 mm Set width: 1300 mm Feed speed adjustable via frequency inverter Dsdpexdib Nefx Aduswc Year of manufacture: 2018

Condition: like new (used), Working width: 1300 mm Glue dosage adjustment Dodpfoxf Hvmex Aduswc Safety switch Manual element height adjustment

Condition: ready for operation (used), Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg Dwodpjxciqhsfx Aduec

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machine for inserting vinyl glue and reins with gun - vibrating bowl for feeding the reins Dwjdpexd Atlofx Adujc - glue tank 9 kg - water tank 9 liters - cleaning disposition - pneumatic pistol - for reins 8 mm, length 25 to 50 mm

Condition: reconditioned (used), functionality: fully functional, working width: 220 mm, Glue Spreader 220 mm Specification: • Condition – fully functional, after inspection Dwodpsxdxw Tefx Aduoc • Working width – 220 mm • New rubber coating • Single, fixed speed • Manual height adjustment • Motor power: 0.37 kW (1,370 rpm) • Overall dimensions: 70 x 60 x 70 cm (L x W x H) Additional information: • Perfect, factory-level technical condition • The photos shown accurately reflect the actual condition of the item for sale • Possibility to power on and test the machine on-site

Condition: used, Year of construction: 2007, operating hours: 14,700 h, Labeling machine for sale with optical centering system Dwjdpevlnvrofx Aduec Labeling Machine with Optical Centering System Available for Purchase: For sale is used adhesive labeling machine, boasting an advanced optical centering system. This apparatus is fitted with 8 motorized plates, each complemented with a dedicated photocell for precise optical alignment. It incorporates three adhesive assemblies, spanning 40 MT, and an intricate 4-axis adjustment mechanism mounted on a trolley. In addition, there’s a supplementary adhesive unit with 6 divisions tailored for L-shaped sealing, also on a trolley. Notably, the L-seal tools can be adjusted to cater to U-seal applications on bottle caps. Technical Details for PE Labelers: The PE labeling machine is equipped with a touchscreen interface, complemented by an integrated PLC and modern electronics, all of which can be tailored to specific needs. Features include an electric lift mechanism and speed modulation via an inverter. Additionally, new touchscreen programming can be introduced, tailored to the unique requirements of the user. Automatic Labeling Machine with Adhesive Stations for Rotary Labelers: The machine’s mechanical slider, bearing the adhesive unit, has the versatility to apply diverse label types to an array of bottles. There’s a specified minimum and maximum label dimension that it can accommodate, though these parameters can be altered upon request. Positioned at the adhesive station’s end is a keypad, capable of storing configurations for up to 200 distinct label variants. Through its dedicated program and a photocell system, the adhesive station autonomously applies the chosen label format, all while synchronizing with the optical centering mechanism. Availability of the PE Labelers for Purchase: This adhesive labeling machine with optical centering is set to be available from 26/10/23 at our specialized workshops. In a fruitful collaboration spanning 25 years with one of our Italian partners, we’ve been crafting both rotary and linear labeling machines. Moreover, we offer refurbishing and modernization services for your existing labeling machines, updating them with cutting-edge 2023 electronics. Contact us today for a complimentary quote. Our support extends from the conceptual phase right through to comprehensive installation and initialization of your labeling machine, be it brand-new or a refurbished and warranted unit. We’re adept at crafting any new bottle dimensions you might require, aligned with new bottle molds you choose to incorporate into your product assortment.

Condition: like new (used), Year of construction: 2020, operating hours: 460 h, functionality: fully functional, machine/vehicle number: 200201, input voltage: 400 V, Gemata Rollmac Coater COLORGLASS 1800, year of manufacture 2020, 460 operating hours, incl. NEW spare parts (roller, replacement conveyor belt and replacement doctor blade), max. working width 1780 mm - Detailed dimensions and technical specifications available in the pictures. Dwodpfx Adsxb A Dxeusc

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment Dwedpjxf Ef Hjfx Aduoc CE marking Safety switch Power supply: 380 V Completely new, year 2025

Condition: good (used), Year of construction: 2018, 2 Meler Hot Melt Adhesive Machines, Adhesive Melter, 5 Liter Hot Melt Adhesive – used – : Price per unit ex works: only €2,950 (net)! Manufacturer: Meler Model: Micron 5 Year of manufacture: 2018 Ref.: 101002240 Micron 5/4 N Serial number: e.g. 1J800918 Outputs: 4 TANK CAPACITY: 5.15 liters MAXIMUM ALLOWABLE BLOCK VOLUME DIMENSION A: 192 mm DIMENSION B: 182 mm DIMENSION C: 106 mm MAXIMUM MELTING CAPACITY: 9 kg/h (*) Djdpfsw S E Najx Adujwc PUMP PERFORMANCE: 29.3 kg/h Pump 7 cc (*) 66.0 kg/h Pump 19 cc (*) NUMBER OF OUTPUTS: 4 TEMPERATURE RANGE: 0 to 200°C (104 to 392°F), optionally: 40 to 230°C (104 to 446°F) TEMPERATURE CONTROL: RTD ± 0.5°C (± 1°F) MAXIMUM OPERATING PRESSURE (AT 6 BAR): 81.6 bar (1,183 psi) DIMENSIONS (L x W x H): 587 x 341 x 481 mm 587 x 341 x 628 mm (with lid open) WEIGHT: 37.5 kg (unfilled) 1-N/PE 230V, 50/60 Hz, 7.1 kW 3-N/PE 400/230V, 2.4 kW Condition: Good Available: Immediately Location: Frankenberg / Saxony warehouse

Condition: ready for operation (used), Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Dsdjw I Sbbspfx Aduswc Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg

Year of construction: 2019, condition: ready for operation (used), Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t. Dsdpfsgl Nwfsx Aduswc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Wrapping machine Max. working width: 450 mm Max. working height: 120 mm Min. working height: 4 mm Total machine length: 6000 mm + unloading system Dwedpjw Rrv Dsfx Adujc Max. feed speed: 60 m/min

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Dwodpfx Ajxf Ed Aodusc Glue dosage adjustment CE marking Safety switch Power supply: 380 V Completely new, year 2025

Condition: good (used), Year of construction: 2008, Hot Melt Adhesive Machine Nordson ProBlue 4, Adhesive Melter, 4 Litre Hot Melt Adhesive – used - : Price ex-location: only €2,950 (net)! More units coming soon! Manufacturer: Nordson Model: ProBlue 4 Year of manufacture: 2008 102223OA AC 200–240V, 50/60Hz, 26A, 1/3 Dimensions: - Length: 540.0 mm - Width: 340.0 mm - Height: 480.0 mm Weight: 50.0 kg Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Dwsdpfx Asw Rcgyeduoc

Condition: ready for operation (used), External dimensions: 2500 × 1300 mm Dodpfx Adsxcw Afoujwc Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW

Condition: ready for operation (used), External dimensions: 2500 × 1300 mm Djdpfxexcwr Ho Aduswc Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW

Condition: like new (used), Working width: 1400 mm Dwedpfx Aexalbwodusc Glue application adjustment Stepless roller speed adjustment Safety switch