Used Edge Gluing Machine for sale (92,625)

Condition: used, machine/vehicle number: 008011, X axis working area: 6200 mm Y axis working area: 1935 mm Working Table: Pod and Rail Bodpfxewu Af Eo Acyodi Main Electrospindle power: 10.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Bdedpfoxp E R Dex Acysi Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. - Panels in-feed system 63.152 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No 1 + 6 reels) Trimming unit 08.055.0.1680 (Kw 1,85 x 1) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 20 + 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) Multi Profile - ( 1 + 3 profiles) by N.C. Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,18) 20 m/min Profile Scraping unit (Multi-profile, by N.C.) 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Milling Grooving unit 08.190 (Kw 4,5 x 1) swivelling 90°/180°/270° (adjustable by CN) (H + V)

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors Bjdpfx Aogipk Aocyjdi tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, working width: 400 mm, grinding width: 400 mm, height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 455 mm, workpiece width (max.): 400 mm, Edge and parquet sanding machine Manufacturer: VG Machines Model: F/G 455 2 KS / 2KS Year of manufacture: 2018 The machine comes from a parquet manufacturing workshop. Bedpfx Aoxrk Tiecyodi Line version / pass-through machine (moveable upper section) for simultaneous calibration and sanding from both top and bottom in a single pass. Working width: approx. 400 mm Equipped with: 1x top calibration roller, approx. 11 kW 1x top sanding shoe, 5.5 kW 1x bottom calibration roller, approx. 7.5 kW 1x bottom sanding shoe, 5.5 kW Abrasive belt dimensions: 455 x 1900 mm Feed speed steplessly adjustable, max. 16 m/min., feed motor approx. 2.2 kW Voltage: 400 V Total connected load: approx. 34 kW Dimensions: approx. 3350 x 1600 x 2400 mm (height with extraction nozzle) Weight: approx. 4,800 kg

Condition: used, Storage location: Sonnefeld Bjdpsway Dcefx Acyodi

Condition: used, Year of construction: 2008, UNIVERSAL DOUBLE-SIDE SIZING & EDGE BANDING MACHINE FOR 1st AND 2nd PASS * Numerical Control / Software: SINITRA * Adjustable feeding speed (m/min): 10–40 (INVERTER C.N.) * Safety and sound-proof enclosures/cabins. * Working line (work units support tables), manual adjustment. * Distance (center-axes) of the disappearing dogs: 500 mm SIZING PART (for each side): * Anti-chipping Milling Unit AS 10 * N° 2 Hogging Units (1 Top + 1 Bottom) * Pre-Milling Unit EDGE-BANDING PART: * Glueing Unit: Hot Melt + Quick Melt Unit * Edge magazine with 6 positions * Snipping end-cutting unit * Rough Trimming unit * Fine Trimming unit 0 - 25° * Multi Function Unit - Profile contour Trimming unit with 4 Motors * Combined Milling grooving Unit: Horizontal + Vertical * Profile Scraping unit - Multi-profile, by N.C. 2 positions * Glue scraping unit * Buffing unit * Hot Air Heater to reactivate the color of plastic tape TECHNICAL DATA * Workpiece width: 240 – 1200 mm * Workpiece length: 240 – 2700 mm * Workpiece thickness: 10 – 60 mm Bdedpfx Aexrc Hnecyoi * Edge thickness: 0,3 – 3 mm * Panel thickness: 10 – 60 mm * Edge height: 15 – 65 mm * Working table height: 950 mm WORKING UNITS * Anti-splint milling unit * Milling unit with pneumatic time entry AS10 * Double-hogging milling unit DT 10 * No. 2 anti-adhesive units * Edgebanding unit SP30 * Roller set to press the edge on straight profiles – 1 + 3 pressure rollers – motorized regulation of depth position automatically by numerical control * Edge magazine – 6 positions for SP10, SP20, SP30, SP40 * End cutting unit IT90-S * Milling unit RF10, straight tools * Multifunctional milling unit AR30 R=2 mm * Edge scraping unit RB10; R=2 mm * Glue scraping unit RC20 * Brushing unit SZ30 * Hot Air Heater (to reactivate the color of plastic tape)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 6702, total length: 3,125 mm, total width: 1,195 mm, total height: 1,379 mm, overall weight: 1,550 kg, vertical edge band sanding machine Bdjdpfx Acexq Tw Ijysi 7 frontal sanding supports 1 upper chamfer sanding support 1 lower chamfer sanding support infeed roller conveyor outfeed roller conveyor belt travel direction from right to left few operating hours!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,800 mm, workpiece height (max.): 45 mm, edge thickness (max.): 5 mm, input voltage: 400 V, working height: 900 mm, chip removal: 2 mm, Special Price!! Felder Edge Bander – As New, Exceptionally Maintained, Year of Manufacture 2022, Commissioned 2023 We are selling our Felder edge banding machine from 2023, which is in like-new, exceptionally well-maintained condition. The machine was delivered new and put into operation in May 2023 and has since operated reliably, precisely, and without faults. It is single-owner and has been serviced exclusively by Felder’s own technicians. Sale only due to upgrading to a larger model. ⸻ Technical Details & Condition • Year of manufacture / delivery: May 2023 • Single-owner – purchased directly from Felder • Regular service by Felder • Exceptionally maintained, immediately ready for use • Can be inspected and tested under power ⸻ ⚙️ Features & Upgrades • Fence extension installed → allows single-person edging of long workpieces • Additional brush rows before the unit → perfectly remove dust and edge trimmings • Result: Clean, precise edges with a perfect radius on every workpiece • Runs quietly, precisely, and reliably – ready for immediate use ⸻ ✅ Key Advantages at a Glance • Machine has seen very little use, therefore nearly as new • No investment required – ready to operate immediately • Exceptionally well-maintained condition, directly from a woodworking shop • Ideal for small to medium-sized companies that value quality and precision 2 x Glue Pots: one for transparent glue and one for white, but can also be filled with other colors. ⸻ Location: 73650 Winterbach Price: €14,900 net, VAT can be shown separately. Contact: mRube Montage und Bauservice Viewing and test run available at any time by arrangement. Bdedsxq Tkzspfx Acyoi Machine must be collected – just set it up and start working!

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Bdodpfx Acjxpn Ufoyoi Feed speed 8 m/min.

Condition: excellent (used), Year of construction: 2023, Single-sided edge banding machine Make: Felder / Format 4 Model: Tempora 45.03 L Year of manufacture: 2023 Edge bander with pre-milling unit Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Pre-milling unit Gluing station for PUR/EVA End trimming saw unit Flush/radius milling unit Corner rounding unit Cleaning spray unit Buffing unit Bdjdpfx Acoxrbkfoysi Control unit: Smarttouch 15" touchscreen Set-up length approx. 4300 mm Total connected load: 14.5 kW Voltage: 400 V, 50 Hz, 3-phase, 22.8 A

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Bodpfovvkdtsx Acyodi

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Bdjdpfx Acsxq Rp Ijysi Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Weight: 2550 kg. Condition: good, second-hand.

Condition: excellent (used), Bargain from liquidation with feed and oscillation Bdjdpsxn Skzsfx Acysi

Condition: good (used), Year of construction: 2013, Edge Banding Machine Manufacturer: Brandt Type: KDF 440 Year of Manufacture: 2013 Edge Thickness: 0.4 - 3 mm Workpiece Thickness: 8 - 60 mm Feed Rate: 8 - 14 m/min, Vario Joining Unit: Yes Pre-melting Unit: Yes Cross-Cut Saw Unit: Yes Radius Flush Trimming Unit: Yes Corner Rounding Unit: Yes Radius Scraper: Yes Surface Scraper: Yes Buffing Unit: Yes Bjdpfx Aswmby Sjcyjdi

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm Bsdpfx Ajhr D Ayocyodi with feed unit: Fields S/308, year 2011 and accessories

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Bdodevvkd Tepfx Acysi Storage location: Nattheim

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Bodpfjvvll Sex Acyjdi Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bedpfxsvvkfdo Acyjdi

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Bdsdpfx Aovvkfqjcyei

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Bdsdpfx Acevvkfweyoi Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Bdjdpfx Aewmf E Sjcyei Storage location: Nattheim

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Bsdpfx Ajvvi Udjcysdi

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Bdodpfxovvkg Is Acyei

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Bsdew Aim Espfx Acyedi

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Bdsdpfsw Aig Sex Acyei