Used International S 1700 for sale (72,746)

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Njdpoy E S E Ajfx Afajcr

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Ncjdpfxey E S E Ne Afajr

Condition: excellent (used), Printing International Cristal 90X2 Ncsdpsv Iyh Sjfx Afaer

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 04.522, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, 2005 UBH INTERNATIONAL 20FT SWAP BODY Tank Container 35,000L / 1 compartment / 4 baffles / 5 lids UN PORTABLE T11 EMKD Steam heating Bottom discharge Valid 2.5-year + CSC inspection until 06-2028 Ncedoy Aymvopfx Afajr = Further Information = General Information Year of manufacture: 2005 Model year: 2005 Suitable for: Chemicals Weights Unladen weight: 4,475 kg Payload: 31,525 kg Gross weight: 36,000 kg Functionality Cargo compartment volume: 25,000 l Body make: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, HORIZON SPF-200A Booklet Making Line | VAC-100 + FC-200A + ST-40 Description: For sale: complete Horizon booklet making line consisting of collating, stitching, folding, trimming and stacking modules. Reliable Japanese production system, ideal for commercial print shops. The machine is fully operational and currently installed in production environment. ---- Configuration includes: Air-suction collator: VAC-100a + VAC-100m Stitching & folding unit: SPF-200A Fore-edge trimmer: FC-200A Stacker delivery: ST-40 ---- Technical specifications: 1. Collator (VAC-100a / VAC-100m): Voltage: 230 V Frequency: 50 Hz Current: 10.4 A (each tower) Feeding system: air suction Configuration: 2 towers x 10 bins 2. Stitcher & Folder (SPF-200A): Voltage: 230 V Frequency: 50/60 Hz Current: 3.4 / 3.2 A Functions: saddle stitching (2 heads) folding booklet production 3. Trimmer (FC-200A): Automatic fore-edge trimming Inline operation with SPF-200A High trimming precision 4. Stacker (ST-40): Voltage: 230 V Frequency: 50 Hz Current: 4.7 A Automatic sheet stacking ---- Condition: Good working condition Complete production line Currently in use Total counter: approx. 1.8 million booklets ---- Nsdpfx Afjy Axdajajcr Advantages: ✔ Complete booklet production system ✔ Renowned brand: Horizon ✔ Inline workflow ✔ High productivity ✔ Reliable and easy to operate ---- Additional information: Machine can be inspected in operation Test production possible Assistance with installation available Availability: to be agreed

Condition: excellent (used), Year of construction: 2001, color: other, loading space volume: 25 m³, UBH INTERNATIONAL 20FT ISO Tank Container 22,500L / 3 compartments Compartment 1: 7,500L Compartment 2: 7,500L Compartment 3: 7,500L IMO1 T7 22T6 Bottom discharge Steam heating 2.5-year + CSC test valid until 09-2028 Nsdpfx Afeyznbxeascr = Further Information = General information Year of manufacture: July 2001 Model year: 2001 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 4,550 kg Payload: 29,450 kg GVW: 34,000 kg Functional Body brand: Van Hool 24,720L TC, 2 comp. (11,950L/12,770L), L4BN, IMO1, T11 Number of chambers: 2 Condition Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2024, conveyor belt length: 2,000 mm, conveyor belt width: 350 mm, conveyor belt speed: 33 mm/s, total length: 2,050 mm, total width: 450 mm, total height: 500 mm, overall weight: 50 kg, discharge height: 500 mm, Equipment: documentation/manual, emergency stop, type plate available, NP 2000 - U 350 O 76 mod.NP (BLADE SEPARATOR) STANDARD FRAME Profile type: STANDARD FRAME Drive roller diameter: 76 STANDARD Bottom flat part length: 2000 mm Usable width: 350 (actual width 345 mm) Loading height external: 300–500 mm Belt type: BLACK PVC ROUGH FINISH BELT LATERAL MOTOR Motor: 0.18 kW 4P B14 400V THREE-PHASE 50 Hz 400V THREE-PHASE / RIGHT SIDE Gearbox: RMI40P 1/100 63 B14 (3.3 m/min) Load hopper: 700 x 550 x H. 200 mm GALVANIZED STEEL SUPPORT Support type: WHEELS Control unit: START/STOP switch Control: ON/OFF + emergency button 400V THREE-PHASE 50 Hz on left side Njdpfxjyym Izs Afajcr

Condition: used, GS international Capacity 12 tons Year of construction 2010 Immediately available Loading bridge needed on site? We can transport the loading bridge for you Nsdsyxv E Hopfx Afaocr

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm Nodpfswktn Aex Afajcr • Maximum height (H max): 1000 mm • Separator with blades included

Condition: new, Year of construction: 2026, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake Nsdpowktm Eefx Afaocr

Condition: good (used), Year of construction: 2017, dispersion and UV varnishing sheet size min 152x152 mm max 760x760 mm paper thickness 0.1 - 1.2 mm UV varnish dispersion varnish 120 g/m² without surface treatment and higher 150 g/m² with surface treatment and higher 200 g/m² with surface treatment and higher automatic setting time 5 minutes automatic washing time 10 minutes Ncedpfx Afsyv Dm Hjasr Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes 8.5” x 11” / 215 mm x 280 mm sheets width 12,700 sheets/hour 12” x 18” / 305 mm x 450 mm sheets width 9,900 sheets/hour 14” x 21” / 355 mm / 530 mm sheets width 8,800 sheets/hour 21” x 30” / 530 mm x 750 mm sheets width 6,300 sheets/hour 28” x 40” / 710 mm x 1020 mm sheets width 5,000 sheets/hour Painting speed 4,600 B2/hour anilox rollers for the machine 3;9;12;18 Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes UV drying IR drying (suitable for dispersion varnish and primer for HP Indigo) kit for processing thin materials varnish application using a chamber doctor blade high feeder 2 independent varnish circuits with automatic washing Anti-Ghost system innovated sheet delivery system

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Ncsdpfx Afex Ig Sieasr Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Prodim proliner 8XCS scanner. Includes software. Small tripod. Leaps. Backpack. IPT and hook pen and remote. Extras included - Heavy duty plastic carrying case. Extra remote. Measuring support bars. Ncsdpfxsyl Spaj Afaor

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes Ncedoylynwjpfx Afaer • Fully integrated into the central machine control system

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Ncedpfx Afjuip Iloajr Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Ncsdpfxexdimfj Afaer Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Nceder A D S Eopfx Afasr Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, New equipment MASS International Discharge Conveyor NPS Conveyor belt / Discharge belt Available at short notice Discharge surface without side wall Height-adjustable, mobile on swiveling stop rollers Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Discharge surface without side wall, thus full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on swiveling stop rollers The quoted price refers to the NPS1. Optional: Dimensions on customer request Ncjdoizi S Dopfx Afajr Belt suitable for food use (FDA-compliant) Modified belt speed Frequency converter for stepless belt speed adjustment etc.

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Nodpjd Tidxofx Afaocr Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH Nodpjvwbvpofx Afascr > Siemens 808D control > Siemens motors > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind Ncedsx Tg Ubopfx Afaor – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Ncsdpfx Aewq Rapjfasr

Condition: new, Year of construction: 2023, The conveyor is from 2023, new and unused. We offer 1 year warranty. Side panels can be added later. For examples see pictures. Nsdpfx Aolkda Hofaocr

Year of construction: 2022, condition: new, - Task length : 600mm - Climbing belt length : 1800 mm - working width 450 mm / total width 505 mm - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting plates - belt speed : 3m/min Nedpolkdbyefx Afaecr - cleat height : 30 mm - spring assisted height adjustment

Condition: new, Year of construction: 2025, functionality: fully functional, The Z-conveyor belt is for sale with the following technical data: Z-belt conveyor Type NDZ - Specifications. Feeding height: 500 mm Incline belt length: 1800 mm Discharge height: 500 mm Useful width: 600 mm, overall width: 750 mm Cleat height: 30 mm Discharge height: max. 1600 mm, min. 1150 mm Belt speed (constant): approx. 6 m/min Aluminum side guides, 60 mm high Mobile base frame with braked castors Nsdpfx Ajw Nrm Hsfaocr Reinforced conveyor belt, temperature resistant from -10°C to +90°C