Used Edge Banding Round for sale (13,210)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Ndedpfx Aexn Hzbsf Ejc Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Function tested Ndedpfx Ajxllvljf Esc Equipment and technical data: Glue pot with roller End trim shears Pressure zone End trimming saw Combination milling unit Surface scraper Chassis Edge material thickness: 0.5-3 mm Min. workpiece width: 90 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 45 mm Min. workpiece length: 50 mm Edge material overhang top and bottom: 2.5 mm Edge material overhang front and rear: 10 mm Location: Hesse Availability: End of November/beginning of December 2025

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with edge sanding unit for processing edges made of wood, veneer, PVC, melamine, ABS – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchen and bathroom furniture, and various other products. Technical data: Min./max. panel height: 8–60 mm Panel height with rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness in roll: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical adjustment Panel support arm Sound-insulated safety cabin Fluid inlets Configuration: Nsdpfx Afoxnvr Aj Eodc Anti-adhesive application unit with two nozzles – two separate tanks for anti-adhesive fluid Pre-milling unit with two high-frequency motors – diamond tools H64 mm – diameter 100 mm, F 30, h 65 – copying kit included VC 560 gluing unit for applying edging to panels up to 60 mm – glue pot capacity: 1.5 kg – interchangeable glue pot End cutting unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, 115 mm diameter – face copiers Tilting trimming/bevelling unit for trimming excess edging top and bottom – 2 motors of 0.55 kW each – 12,000 rpm – tilt from 0° to 25° – 2-position pneumatic quick-change kit for processing thin or radius edges Corner rounding unit with two motors on precision guides – enables rounding and trimming of thin and thick edges – 2 motors of 0.55 kW each – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edging with rotating tracing guides, extraction hood, and trimming waste cassette Glue scraping unit – removes glue residue from the lower and upper panel surfaces Brushing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. Njdpew Sn I Ejfx Af Ejdc The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: excellent (used), Year of construction: 2013, Edge banding machine Manufacturer: Brandt Model: KDF 220 Highflex 1220 Year of manufacture: 2013 Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 50 mm Overall length: approx. 4,150 mm Feed speed: 10 m/min Total power: 9.5 kW Nodpsw N Sb Rjfx Af Eedc Weight: approx. 1,150 kg Jointing unit: Yes End trimming unit: Yes Flush milling unit: Yes Corner rounding unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Njdpfxsxncrvs Af Eodc Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Two independent Y-axes for the main spindle and edge banding unit Ndodpfx Afsxmvtqe Ejc Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013)

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Ndsdpfx Afexllvro Eec Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Ndjdpfx Afoxg Ixro Eoc Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, Year of construction: 2020, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, type of input current: three-phase, Further technical data: Ball-bearing turntable for edge banding rolls, Ø 740 mm Edge thickness: 0.4 – 3 mm Workpiece height: 8 – 45 mm Extendable workpiece support up to 450 mm Manually adjustable workpiece height m-motion and x-motion PLUS control systems (highest setting repeat accuracy, programmable) Robust processing units in new design, solid machine base, precise extraction system Additional equipment: Surface scraper Nodpexdb U Usfx Af Ejdc Spraying unit for cleaning agent LED lighting package Tempora 45.03 Spraying unit for release agent Cross-cut saw unit with 45° travel path and radius processing Pneumatic-mechanical infeed lock 75 x-motion PLUS package Tempora 45.03

Condition: used, Year of construction: 2010, Edge thickness 0.4 - 10.0 mm; cross-cut saw unit; radius scraper unit; flush and radius milling unit; joint milling unit; polishing unit; corner rounding unit; spraying of release agent; spraying of cleaning agent; interchangeable glue pot; cross-cut saw unit e-motion; combination milling unit e-motion. Storage location: customer Nedpfx Afjxguvqs Eodc

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Ndodjxnb Uvjpfx Af Eec Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Nodpfx Afexgrfps Eedc Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical specifications: Machine completely overhauled and serviced Feed speed steplessly adjustable from 10–18 m/min Edge Control 19 control with 18.5" touchscreen color display Ndedewka N Tepfx Af Esc Jointing milling unit Edge feeding unit Glue application station: cartridge with sensing nozzle, with automatic glue height adjustment Pressure unit End trimming unit Multi-function milling unit Corner copying unit Radius scraper unit Flat scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2005 Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Ndodpfx Asxl Ufvef Ejc Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: excellent (used), Year of construction: 2011, Edge banding machine for edging and post-processing of panel materials Ndedpsxggmbsfx Af Esc Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Max. 15 mm possible with tool change on the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min Control unit PPC 221 – with 8.4" VGA color screen Motorized adjustment of the infeed fence, adjustable via control unit Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feed 1901 SYNCHRO Automatic feeding of roll and strip material Glue application system Glu Jet GJ301 automatic Automatic glue height adjustment (contact nozzle) Glu Jet hybrid technology – for processing EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Glue granulate container 5 kg for GJ301 PRESSURE UNIT – Pressure section 1914-1 MOT END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swivel function 0/10° for coils and strips MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) with 4 NC servo drives for flush, radius, and chamfer cuts CORNER ROUNDING UNIT Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm) Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors SCRAPING UNIT 1927 MOT5 Carbide reversible blades for scraping knives 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue to achieve a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Nedexggzlepfx Af Ejdc Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable Njdoh U Nzpepfx Af Eodc End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total length: 4,000 mm, total width: 1,200 mm, total height: 1,400 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 Ndsdpfx Afoww H Enj Eec FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES MACHINE LENGTH: 4.50 M

Condition: used, Year of construction: 2013, Used machine Year of construction: 2013 Machine number: 133 Machine has been completely overhauled new Glue Jet 301 glue system (upper part 1 mm) all units checked all cutters sharpened all knives changed - electrics for infinitely variable feed 400 V / 50 Hz, 2.2 KW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - infeed guide 1350 mm, motorized adjustment - Joint trimming unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 trimming units for joining the panel edge. - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for jointing trimming unit 1801 / 1802 - Fully automatic edge feeding unit 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) -Storage chute for granulate - Printing unit 1913 MOT - Cutting unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise rotation - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise rotation - Shaping cutter unit 1833 MOT4 Ndsdpewka Iijfx Af Eoc - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise rotation with CM technology - Scraper unit 1929 MOT2 - HW inserts for scraper holder R = 2.5 mm (2 pcs. required) - Surface scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) Availability: short term Location: Hochheim Hochheim

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins Nodpexggthefx Af Esdc SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2280, year 2015: Configuration: Entry fence manual adjustable Njdpjxnbx Ijfx Af Ejdc Premilling manual adjustable Edge banding with preheating tank Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor manual adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment manual driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 9365mm Kilometerstatus 2.926.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: ready for operation (used), Year of construction: 1999, SCM Edge Banding Machine OLIMPIC S 220 - Manually adjustable infeed fence - Jointing unit - End trimming unit - Flush trimming unit Nodpsr A Eumefx Af Esdc - Chamfer trimming unit - Automatic feed - Corner copying unit with 4 motors - Radius scraper knives - Flat scraper knife - Buffing unit - Hot air blower - Machine length: 7.50 m

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Ndedpfx Afew I U E Ae Eec Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Used machine Nsdewwxykopfx Af Ejdc