Edge banding machine

FELDER G 380-4

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Nljdexranpopfx Afaoa Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Nsdpfol Txw Hjx Afaola Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system Njdpfx Afjwyu E Ueasla • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Nlodsx S Hmzjpfx Afaea Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Nsdpfxowuz Nio Afasla Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: Nledpfsyfp N Dsx Afasa - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Nlodpfxjyf I T Uo Afaea Edge feed for coil and strip material Scraper knife

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) Nodpfx Afottgy Heaola B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Nlodpfx Afohvahhsaoa Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: used, Table dimensions 2500x 780 mm Motor output 7,5 kW Nljdpfx Ajxpi D Isfaea Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min