Used Double Mitre Saw for sale (17,686)

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 420 mm, saw blade speed: 2,800 rpm, air pressure: 7 bar, Double-head saw for cutting aluminium and PVC profiles. Features a short-length stop, E555 electronics, two sliding profile holders. Rollers on the movable head. Lubricators for blade lubrication when cutting aluminium. Ijdpfx Ajxb Anqefietn

Condition: ready for operation (used), functionality: fully functional, Crosscut Saw / Mitre Saw / Crown Moulding Saw Itodpsxbnqdsfx Afisn Manufacturer: Hüllhorst Model: KLS Swiveling crosscut saw, previously used for profile strips and crown mouldings. Maximum infeed length: approx. 4,000 mm Outfeed table length: 3,000 mm Maximum cutting cross-section: approx. 160 x 110 mm (W x H) Infinitely adjustable swiveling range, +/-45 degrees Saw motor: 4.4 kW Speed: 120 – 4,200 rpm Maximum positioning speed: approx. 60 m/min 2 x 80 mm extraction ports Control: Ferrocontrol Cutting accuracy: +/- 0.1 mm Dimensions: approx. 9,000 x 1,300 x 1,500 mm (L x W x H) Machine fully checked and cleaned. Among other things, a frequency inverter and a control unit have been replaced.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is an automated cutting system equipped with premium Morso guillotine blades for perfect corners in wood, plastic, and MDF. With a capacity of over 500 frames per hour, material savings are achieved thanks to the minimal saw kerf of just 1 mm (as opposed to 6 mm with conventional saws). The automatic material feeder accommodates up to 13 lengths, clamps ensure secure holding, and a splitter sorts cut pieces while removing waste. Control is via Mitsubishi touchscreen and PLC, with pneumatics supplied by SMC. Iodpfxsw U D E Eo Afistn

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Comes with technical documentation (DTR). Itodpfx Ajw Ucwaofien Two new 400 mm saw blades included for free. GOOD CONDITION NET PRICE

Condition: good (used), Duplex DD double mitre fence for Altendorf panel saws Modified for use on Altendorf panel saws with steel guide rail, from approx. year 1998 onwards. Cross-cutting up to approx. 1400 mm Digital display of angle and cutting length with automatic angle compensation eliminates the need for test cuts. The protective film shows minor damages that do not affect functionality or operation. Machine demonstrations can be arranged by appointment at our premises. We only offer machines that are ready for demonstration and in stock, see 'further offers from this supplier.' Itedpfx Afsw Nxu Deion

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, Isdpfxjw Tc Hro Afietn - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size.

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 2 kW (2.72 HP), MAX cutting depth: 200 mm Chain width: 400 mm Iedpfx Aotvpfmefietn MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps Itedjd N H A Njpfx Afien motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs Itsdpfx Ajw H R R Hefion – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg Isdpfew Htm Rsx Afiotn To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 014105, saw blade diameter: 250 mm, overall weight: 250 kg, rotational speed (max.): 5,000 rpm, inner diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Rated speed: 5,000 rpm Saw blade diameter: 250 mm Fence: up to 6,300 mm Max. cutting depth: 90 mm Inner diameter: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 900 x 1,600 mm Weight: 250 kg Isdpfxsw Hrzmj Afistn EQUIPMENT With roller conveyor assembly kit Note: The saw does not have a continuous roller conveyor; the last roller supports the profile at the end of the fence.

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Iedpfxowa Tilo Afietn

Condition: new, Year of construction: 2024, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes Ijdpfxjiy Ry Ao Afiotn suction plant diameter: 100 mm weight: 490 kg

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Itsdpfx Aoquzd Rofion Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. Iedpfow Rg Sasx Afietn *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1992, condition: used, Double-head saw ELUMATEC - model DG 142 - year 1992 - blades 500 mm Itsdjpcgz Dopfx Afien

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg 1707 connected load frequency 400 V 230 V frequency 50 Hz generator - rated current 8 A output 4 kw saw-blade dia. 400 mm Itedpfxoupmv Us Afisn ja

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Itedpfxewt Tkvj Afion

Condition: used, - 2250 mm Cutting width - 80 mm cutting height Itjdpfx Ashkm A Nsfisn - 2x 3,7 KW saw motors

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Ijdpfx Asdzp T Dofistn Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal Isdpfevyidmsx Afietn • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: excellent (used), ELUMATEC MSG 105 saw 420mm blades Itsdpjl E Ickefx Afisn EU transport ~300 euros

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm Isdsw D Dfxopfx Afiotn miter angle: 45° – 90° workpiece: max. 50x70 mm Further data: See PDF

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Iedpfx Afsv Hgkqeijtn

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm Itodpfx Asg Db U Asfion cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg