Used Double Mitre Saw for sale (17,696)

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Iodpfx Asw Hlztjfiotn Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Itjdoxnlgcopfx Afion Storage location: Garbsen

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Iedpfx Afogixvwoijtn Power: 5,1 kW Weigth: 1260 kg

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Iodpfokfvhkox Afietn Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg Isdpfxjxph E Rj Afistn

Condition: excellent (used), Saw – miter saw Pertici Univer 40mm Blade diameter: 400 mm Blade bore: 30 mm Motors: 2.2 kW Max cutting width: 190 mm Max height: 110 mm Two angle adjustments for cutting Isdoxmhf Sjpfx Afistn CE certificate DTR documentation

Condition: good (used), functionality: fully functional, We offer a miter saw with 4 cutting units. Detel saw Type CDM 2X2-6000 2 x 2 units of 2.2 kW each Ijdjxn Rlqepfx Afijtn Disc diameter 180 mm Pneumatic clamps Milling cutter holder Waste conveyor belt Motor with brake Frequency-controlled motors

Condition: reconditioned (used), functionality: fully functional, Usable cutting length 4000 mm Isdpfxewwm Ezs Afiotn Blade diameter 500 mm Pneumatic head tilting 90°/45°-22.5° Probe

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Itodpfjuiwqhsx Afien Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted Isdpfx Afjkfp D Tsiotn

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base Ijdpfx Afsxk Uuneistn - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: excellent (used), Double mitre saw ALFAMACCHINE T350 CE Double saw for cutting at 45-degree angles Itjdpfsxg Hx Djx Afijn Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Cutting height: 10-80 mm

Condition: ready for operation (used), Saw band dimensions X/Y/Z: 2450mm/27mm/0.9mm, max. cutting capacity at 90°: 220mm/220mm, max. cutting capacity at 45°: 150mm/150mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 1300mm/800mm/1500mm, weight: approx. 250kg. An on-site inspection is possible. Isdpfxsxl El To Afijtn

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm Ijdpfexl Eadjx Afiotn • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Iedpjtu Hy Esfx Afiotn Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable Itjdpfx Afstxkpreien -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Year of construction: 1980, condition: good (used), ULMIA mitre-saw 1630 Blade dimensions Ø of 300 mm Speed range Ijdpjd Ddgpsfx Afistn 95-3000 rpm Overall performance 1,1 kW Masch. Weight 270 kg Dimensions (W x D x H) 0.9 x 0.73 x

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Itjdpexg Hanofx Afion Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - Track width: 340 mm - Shaft width: 360 mm - Disc bore diameter: 70 mm - Max. disc diameter: 315 mm - Max. cutting height: 180 mm * from above - Pulling shaft, toothed, pneumatically pressed - 2 rows of kickback guards Isdov Ed Uwepfx Afijtn - 3 pressure rollers, sliding, smooth - Kickback guards - Shaft with sawblades - 3 sliding, smooth pressure rollers - Kickback guards * from below - Infeed pulling shaft, toothed - Track - Shaft with sawblades - Track - Stepless feed speed adjustment via frequency inverter - Main motor: 2x55 kW - Feed motor: 4 kW - Electric raising/lowering of upper body - Electric adjustment of shafts with sawblades - Central lubrication - Extraction nozzle diameter: 2x150 mm - Dimensions (L/W/H): 2800x2400x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian production – Two-shaft design – Ideal for large workpieces – Used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,000 EUR exchange rate 4.25 EUR (Prices may change in case of higher fluctuations)

Condition: used, Double edger / Edger line / Multi-blade circular saw Wurster & Dietz LB 12 0-line left Right-hand machine (adjustable saw blade right) max. pass-through height: 100 mm max. pass-through width: 65 mm with 5-strand cross conveyor as feed Isdpfx Asxhbxnjfistn with 2 crosscut saws with roller infeed table with laser with lath head with chip separator with spiral roller conveyor (length: 9 meters) with discharge table (cross conveyor 5-strand) (length: 5.2 m, width: 2.2 m) Location: Austria, near Ried im Innkreis

Condition: new, Code: N0764 Brand: SCM Model: NOVA SI X - CE Standard Iodod Dc Ecopfx Afistn Circular saw with +/- 46° double blade tilting with 3 controlled axis - Version READY 3 UP - CE Standard equipped with following optionals : Start buttons integrated into the sliding table Squaring frame with Compex device Squaring fence with n° 2 LCD displays for position reading Technical data: Max. saw blade diameter with mounted scorer mm 400 Maximum saw blade projection from table to 90°/+46°/-46° mm 136/97/60 Cutting width on rip fence mm 1270 Squaring capacity mm 3200 Three-phase motors starting from kW/Hz 7 (8) / 50 (60)

Condition: new, saw-blade dia. 210 mm Isdpfx Afju Imnioietn Cutting height 70 x 305 mm Cutting height at 45° 35 x 305 mm saw blade turning speeds 4500 U/min Motor output 1,5 kW machine weight ab. 9 kg Dimensions (L/W/H) 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Itodpfx Ajvvkm Iofion Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER 7044 TECHNICAL DATA - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum raw material length: 620 mm - Top: 4 sliding rollers - Upper rollers act as material pressers - Bottom: pulling chain - At the outlet: metal sliding rollers at the top and bottom, 1 pc each - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total outlet chute dimensions (L/W/H): 3150x700x870 mm - Total machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Condition: very good, – used saw Net price: 7,900 PLN Itedpfx Afsmih Sfoien Net price: 1,860 EUR Net price calculated according to exchange rate 4.25 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: new, saw-blade dia. 305 mm Cutting height 105 x 340 mm Iedpou Immrjfx Afietn Cutting height at 45° 60 x 340 mm saw blade turning speeds 5000 U/min Motor output 2,0 kW machine weight ab. 25 kg Dimensions (L/W/H) 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports