Double crosscut saw

Hüllhorst DH54S

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 58,000 mm, first registration: 01/2016, mast type: telescopic, Year of construction: 2016, Drive: Wheeled Gedowud E Topfx Anksub Payload: 65,000 kg Gross vehicle weight (GVW): 42,388 kg Mast: Telescopic (4 sections) Mast length: 58 m Lifting capacity: 65,000 kg Superstructure make: GROVE RT765E-2 Technical condition: very good Visual condition: very good

Condition: like new (used), Through feed double end trimmer saws. Gjdpfoif N Sxox Ankoub 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.

Condition: good (used), Year of construction: 1980, max. pallet size 120 x 165 cm 20 nail guides Gsdpfx Asxpi N Renkeub year of manufacture 1980, still in good condition

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Gusdov Si Szopfx Ankeb Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2010, condition: good (used), 2250mm pallet nailing line Semi-automatic nailing table Turner + (optional marker) Stacker (3000mm maximum) Godpfopy H Erex Anksub Transfer

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ Gujdpowhw Iuefx Anksb - electrical switchboard for the machine.

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° Guedpfxsiqp Ere Ankjb - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. The KINGWAY MX-MRW14 model is a modern, compact track loader with skid-steer steering, engineered for efficient operation in challenging terrain and confined spaces. Thanks to its compact design and high maneuverability, the MX-MRW14 is ideally suited for construction, landscaping, and municipal applications. The KINGWAY MX-MRW14 is a reliable solution for professional users seeking a compact yet powerful machine that combines functionality, durability, and low operating costs. Mini Skid-Steer Track Loader KINGWAY MX-MRW14 Technical specifications: Model: MX-MRW14 Operating weight: 620 kg Bucket capacity: 0.1 m³ Travel speed: 0–4 km/h Max. lifting force: 180 kg Max. working height: 2,500 mm Max. pin height: 1,967 mm Max. dump height: 1,575 mm Reach at max. dump height: 480 mm Wheelbase: 905 mm Ground clearance: 130 mm Bucket dump angle: 70° Dimensions: Bucket width: 1,120 mm Overall length: 2,090 mm Gjdsyk Ekhepfx Ankeub Overall width: 1,020 mm Overall height: 1,180 mm Turning radius: 1,140 mm Engine: Manufacturer: RATO Model: R420D Power: 8.6 kW Max. engine speed: 3,600 rpm Cooling: Air cooled Engine oil capacity: 1.1 l Fuel: Petrol Tyres: Tyre size: 18×8.50–8 NHS Tanks: Fuel tank: 5 l Hydraulic oil tank: 30 l Price: Net: €4,200 Gross: €4,998

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Gedsdx Elmepfx Ankoub Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Frame roller conveyor Gusdpfxov Ummbj Ankeb 4-strand puller Viewing by appointment.