Stromab Cutting Machine for Boards up to mm. 250, height mm. 100

Stromab

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Iodskwhb Hspfx Ah Nstb Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Cutting height under the blade 160mm / possibility of adjustment Width of cut on the feed wheel max. 900mm. 1 pc. moving head with laser adjustment. Diameter of main saw blade 300 - 500mm. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately. Itedsxxgy Sjpfx Ah Nob

Condition: good (used), Year of construction: 2018, functionality: fully functional, Data on the nameplate Itjdeyahlgjpfx Ah Njb

Condition: good (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 500 mm, The saw is still in operation and can be tested at any time by arrangement. Data available on the nameplate. Itodpjyaangjfx Ah Njb

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us. Itodpfxjfn Ndde Ah Neb

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked Iedporx Tatjfx Ah Nstb - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: used, Year of construction: 2004, functionality: fully functional, AUTOMATIC CROSS CUTTING MACHINE STROMAB MOD. TR 600 Isdox Rrp Sopfx Ah Njtb - 2 meters infeed rollers - 2 meters outfeed rollers - N. 3 stops - CE rules - Year 2004

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Electronic fence adjustment Electronic angle adjustment SCM 4-roller power feed Ijdpfsxg Iz Hsx Ah Nstb

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min Itedpfodify Iox Ah Neb cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: good (used), Code: 0271 Brand: STROMAB Model: TR 600 MATRIX 2 PLUS - CE Standard Ijdpfxox Ikvlj Ah Netb Automatic cut-off saw with electronic pusher MATRIX 2 PLUS ( mm 8000) for the production of pallets, packaging, door and window frames, furniture and garden furniture, carpentry and various - CE Standard Technical data: Blade diameter mm 600 Motor Hp 12,5 Blade speed min 3000 Working table height mm 850 Hydraulic blade unit drive Blade lifting speed regulator Cutting area protection cover Bimanual hand guard control Cutting capacity Width 610 mm - Height 30 mm Width 580 mm - Height 60 mm Width 530 mm - Height 100 mm Width 490 mm - Height 120 mm Width 450 mm - Height 140 mm Width 380 mm - Height 160 mm Outfeed flat table Suction ports n° 3 diameter mm 100 Numerically controlled pusher MATRIX 2 PLUS Technical data: Maximum working length mm 8000 Feeding system featuring precision rack and brushless motor Positioning reading on magnetic stripe Positioning precision +/-0,4 mm Pneumatic rising of the pusher with workpiece measurement sensor Main system: Cutting cycle (pattern) editing by keypad, by remote PC via serial port (RS232) or by Ethernet Working software: A) N° 99 programmable cutting cycles with 15 sizes (lines) per cycle - Example of cutting cycle: Board length, trim cut , 1 size (line).....15° size B) N° 1 cutting cycle with 100 programmable sizes to be cutted in sequence Exit surface 4000 x 600 mm Compressed air 7 bar Overall dimensions of assembled machine: mm 13000 x 2000 x 1600 h Overall dimensions for transport : Machine mm 1200 x 1700 x 1600 h - Matrix pusher mm 8800 x 1500 x 1500 h Weight kg 1600

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 Itodsr A Et Tepfx Ah Nob 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: good (used), Code: 0215 Brand: STROMAB Model: PS 45/F - CE Standard Manual pendulum saw for cutting wooden boards, packaging, wooden fixtures, carpentry, sawmills, and various - CE Standard Technical data: Blade diameter mm 450 F30 Motor Hp 5,5 Motor speed rpm 2800 Cross-cut capacity mm 510 Depth of cut mm 130 Manual feed Inlet roller table Outlet roller table Itjdpfexivzaox Ah Njb Extractor hood diameter mm 150 Overall dimensions mm 3800 x 1500 x 1850 h Weight kg 290

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Itjdpsulzchofx Ah Nsb Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control Itjdpex Adlgjfx Ah Nsb • automatic, lifting belt conveyor for boards • dust extraction device • low working hours

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Power supply: 400 V Blade diameter: Ø 600 mm Machine weight: 1820 kg Year of manufacture: 2006 Type: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Max. cutting width: approx. 410 mm Minimum workpiece size: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1000 mm Chip extraction connections: Ø 100 mm Beckhoff control with 12-inch touchscreen (Windows interface), 3D element visualization, cutting list import via USB/Ethernet. Itodpfsx Nnd Aex Ah Nsb