Used Double Mitre Saw for sale (18,770)

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Workpiece dimensions at 45° Height: 80 mm or 90 mm Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Saw blade diameter: 300 mm Motor speed: 3000 rpm Ljdey Sinzjpfx Aiisrn Space requirement: 3830 x 1100 x 1600 mm

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW Ledpfx Aiowmg Saoiern power of the feed drive motor 1.50kW

Condition: new, Year of construction: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range, horizontal: 45° - 90° - 25° Miter range, vertical: 60° - 90° - 30° Lrjdpfx Aoiy Ry Ajiion Saw blade diameter: 520 mm Rotational speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Weight: 490 kg

Condition: good (used), functionality: fully functional, Table and mitre saw TGS 173 with sliding table - on mobile base unit with 2 drawers - Adjustable feet NOT included Transport available at extra cost! Lrodpfxsx R Eadj Aiijn Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Lsdpfjyxgynjx Aiijrn Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation

Condition: used, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Ljdjy Rh D Espfx Aiiern Specification: • Technical condition: used, after inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum dimensions of workpiece cut at right angle: 110 x 150 mm (height x width) • Blade guard for operator safety • Extraction port diameter: 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect extreme angles) • Overall dimensions without tables: 82 x 80 x 76 cm (length x width x height) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and test the device on site • The price listed in the auction does not include VAT or transport costs Financing and Transport: • We organise transport with the MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Condition: used, work piece width max ~ 100 mm workpiece height max ~ 100 mm cycle time 4 sec Mitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction. The glue must be applied manually as the machine does not have a glue container. Operation: Foot switch Possible angles: 90°, 120°, 135° Lrsdpfx Ajv Hp Hbjiion Machine without function

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Ljdpfjy N Rg Tex Aiiorn Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: used, Year of construction: 2002, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, saw blade bore: 50 mm, total length: 4,400 mm, total width: 3,600 mm, total height: 1,100 mm, overall weight: 1,500 kg, No. 3270 Double cut-off saw Eima 122 Used, year of construction 2002 Double cut-off saw / double crosscut saw Ledpfx Asy Ef Hyeiisrn 2 motors, 4.4 kW Both saw units are swiveling Maximum saw blade diameter 400 mm Bore 50 mm Cutting width 210 - 2500 mm Cutting depth 2500 mm Cutting height 100 mm Vacuum suction for workpiece clamping Automatic width adjustment defective, cutting width is currently adjusted using the hand crank Installation dimensions approx. 4400 x 3600 x 1100 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0733336662, Mitre saw elumatec MGS 73/33 Lrodpey Nncrefx Aiisn Versatile for use with aluminium and PVC profiles Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Hydro-pneumatic saw feed 2-hand operation Pneumatic profile clamping (2x horizontal, 1x vertical) Pulsed coolant system Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Length 850 mm, depth 900 mm, height 1,450 mm, weight 220 kg Machine is ready for operation

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Ledpfsy Nm Umex Aiisrn

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20221346, input voltage: 400 V, Quiet running Heavy cast iron version High cutting accuracy due to vibration-free running Ball-bearing saw blade guide EMV class C2 Twin-channel safety chain with quick stop in case of emergencyStop Chips brush Microswitch for automatic limit switch Push button - Manual saw band run - the hand lever switches the saw band run on and off Serially with high-quality bi-metal saw band Material stop with scaling Quick clamping vice adjustable via hand wheel. Clamping the workpiece with a handy quick-action clamping lever Stable machine base End stops adjustable to the degree Steplessly adjustable saw blade speed 15 - 90 m/min Lsdpfx Aijyx S Dfeijrn Double miter Turntable: Any angle between 45° and -60° can be sawed as the cutting gap swivels with the saw arm

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm Lrodpfx Aiexwumqsisn

Condition: new, Year of construction: 2025, machine/vehicle number: MR006589, High-quality, high-speed crosscut saw with automatic feed system and optimization software. This machine is equipped with a feature to detect faults in the material using chalk markings and comes with the following options: - Pneumatic feed cylinder right of the saw - Pneumatic feed cylinder left of the saw - 'OPTI' package with material length detection and additional optimization criteria - 'OPTI PLUS' package with photocell recognition of material defects - Machine with outfeed table (per meter) - Label printer - MO9416XLTD Technical specifications: - Mitre angle: 90° - Maximum cutting length: 360 mm - Maximum cutting height: 135 mm - Maximum feed length: 6000 mm Ljdpfoy I N Akex Aiiorn - Saw list import: Yes - Chalk mark sensor: Yes - Maximum saw blade diameter: 500 mm - Motor power: 10 hp - Serial number: 10561

Year of construction: 1999, condition: used, Angle display: digital Length stop flap measurement display: digital Lredpfx Ajy A Hikoiien

Condition: excellent (used), Year of construction: 2013, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Ledpfxot Rn Smj Aiisrn Motor power 1.85KW + 1.85 KW Magazine for elements. Return of the element to the operator Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: new, Year of construction: 2026, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ljdox Urucopfx Aiiorn Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, We offer this ready for use Elumatec DG 104 Double Miter Saw, year of construction 1995. Machine is fully working. 6m long, 3 axis Manufacturer: Elumatec Lodpfsy Hpfvex Aiisrn Model: DG 104 Year of manufacture: 1995 Machine type: Double Miter Saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Transport 350 EUR Lsdpewna Rxjfx Aiiorn

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Lrjdpfekfvhkex Aiion Technical data and dimensions: Subject to change.

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Lredpokfp D Tjfx Aiien Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: good (used), Cap saw, PEGIC mitre saw Specification: - blade diameter - max 200 mm - engine power - 0.8 HP - spindle - 20 mm - cutting adjustment +/- 45 degrees - cutting cross-section - 4 x 14 cm - overall dimensions 50 x 48 x 70 cm ( W x D x H ) Additional information: * factory technical and visual condition Ljdpfx Aetrwvreiiern * presented photos illustrate the actual state of the object of sale * possibility to turn on and check the device on site. * the price listed in the auction does not include VAT.

Year of construction: 1980, condition: good (used), Ulmia circular saw 1630 Saw blade dimensions Ø max. 300 mm Lrsdjd Ddgpjpfx Aiijn Speed range 95 - 3000 rpm Total power 1.1 kW Machine weight 270 kg Space requirement (W x D x H) 0.9 x 0.73 x

Year of construction: 2025, condition: used, We are offering this used M.S.K. OMRM 133 OMRM133 automatic double-head PVC alu machine, diameter 550 cm, year of manufacture 2025. Model: OMRM 133 Serial number: 25DCM330004 Production date: 2025 Power: 6.5 kW Voltage: 400 V Frequency: 50 Hz Current: 32 A Air pressure: 6-8 bar Air consumption: 95 l/min Weight: 1220 kg Width: 1985 mm Length: 8110 mm Height: 1895 mm Country of origin: TURKIYE Ljdpfsy Encwex Aiiorn If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Saw blade diameter: 550 mm Lrodpfx Aisy Egahjien Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg