Used Double Head Mitre Saw for sale (25,518)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm Lodpfx Asq Ii Dljagerh undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm Lodpfoygm Aksx Aagsrh - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Ledpfowa Tilsx Aagerh

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Lrjdpfx Aev Hgkqoageh

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Lredpfxewt Tkvs Aagsh

Condition: ready for operation (used), Saw band dimensions X/Y/Z: 2450mm/27mm/0.9mm, max. cutting capacity at 90°: 220mm/220mm, max. cutting capacity at 45°: 150mm/150mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 1300mm/800mm/1500mm, weight: approx. 250kg. An on-site inspection is possible. Lrjdpfx Aoxl El Tsagoh

Condition: excellent (used), Year of construction: 2005, I sell the thin cutting mini frame saw gatter NEVA TR88 Orbit plus, year 2005. Configuration with top + bottom moulding heads 1,5 + 1,5 KW suitable for later lamellas gluing Main motor 15 KW Working height 270mm Digital working height adjustment w. ELGO Electric Positioner Digital feedign speed adjustment w.MKS Total weight 2800kg. Lot extras, saw leafs, adjustment elements and frame adjustment device indluded. Very good condition. Fully working. Made in Czech republic. Lsdpjiuc Scjfx Aagjrh

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm - Blade speed 2800 rpm - Weight approx. 1500 kg Lredpox N R H Tsfx Aagjh

Condition: excellent (used), Year of construction: 2014, - Tools Ø 500 mm - Blade speed 2800 rpm Lsdex N R Iqjpfx Aagjrh - Weight approx. 1600 kg

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw spindle diameter: 30 mm Guide rail length: 1100 mm Miter cutting range: from –80° to +80° Bevel cutting range: from 0° to 90° Work table dimensions: 835x1175 mm Saw blade guard Power supply: 400 V Motor power: 3 kW Ljdeyhnkfspfx Aagorh Overall dimensions: Length: 1400 mm Width: 1175 mm Height: 1600 mm

Condition: used, Stromab Mitre Saw for Boards up to 250 mm, Height 100 mm Lodpfsrnbnkex Aagerh

Condition: used, Transport 350 EUR Lsdpfx Aajwna Rxegorh

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 526 0019 003, One head is movable, the other is fixed. Quick-change system for the milling cutter. Cutter movement is powered by a pneumatic cylinder. Suitable for milling long profiles beyond the machine's footprint. Pneumatic profile clamping. Maximum milling height: 90 mm. Maximum milling depth: 30 mm. Maximum profile width: 120 mm. Lredsyhlqcepfx Aagoh

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 6310, CNC – rotary-head bridge saw SPRINT 456 Vacuum manipulator 500 kg X-axis 4,150 mm Y-axis 4,550 mm Z-axis 600 mm Spindle drive motor 18.5 kW Drilling unit with 1/2" left-hand thread Lredpfx Ajyhlc Ssagjh Software EasyCut / EasyStone Premium Worktable 4,140 mm x 2,000 mm (tilting table) Additional table extension 4,140 mm x 1,200 mm Underslung saw Steel foundations Slab thickness measuring unit Saw blade measurement Air conditioning Slab digitization system Spray bar

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1050126409, saw blade diameter: 420 mm, Mitre saw elumatec MGS 105/01 The universal saw for special applications The reliable elumatec principle “Cutting from below”: Free access to the table surface for optimal loading and unloading of profiles The patented saw arm suspension creates a cutting pressure towards the back fence which ensures safe clamping of the workpiece Safety hood opens automatically Pulsed coolant system Pivoting range manually 22.5° to the left and right with digital display E111 Tilting range pneumatically from 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 4 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 32 l with spraying Lrsdpoyhhv Iofx Aagoh Length 1,400 mm, depth 1,500 mm, height 1,880 mm, weight 750 kg Machine is ready for operation, saw blade was sharpened.

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Lrodpfx Asydc Tmoagsh Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable to an angle of 45/-45° Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: used, Year of construction: 1999, functionality: fully functional, OMS FC 350 R 2.2 kW Mitre Crosscut Saw – fully serviced, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum cutting dimensions at 90°: 115 x 150 mm (height x width) • Saw blade guards for operator safety Lredpfx Ajyhg Ebsagoh • Integrated internal chip extraction system • Cutting angle adjustment: +/- 45 degrees • Year of manufacture: 1999 • CE markings • Overall dimensions (without tables): 85 x 81 x 160 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown present the actual item for sale • Possibility to power on and check the machine on-site • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier companies or external carriers • Financial support available in the form of leasing or lease-loans

Condition: new, Technical data: Saw blade diameter: 500 mm Automatic saw feed Max cutting height: 120 mm Table length: 2540 mm Table width: 360 mm Table with 8 built-in rollers Lredpfx Aswya Hqoagoh Roller diameter: 60 mm Mitre cutting capability: NO Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 2540 mm Width: 900 mm Height: 1340 mm

Condition: used, Crosscut Saw, Mitre Saw OMGA T50.350 2.2 kW - after technical inspection, ready for operation Specification: • Technical condition – used, after inspection • Manufacturer – OMGA • Model – T50.350 • Blade diameter – 350 mm (bore 30 mm) • Saw motor – 2.2 kW Lrsdsyg R Nuepfx Aagsh • Max. dimensions of cut element at 90°: 100 x 165 mm (H x W) • Safety covers on the saw for operator protection • Extraction outlet – ø80 mm • Cutting angle adjustment: +/- 45 degrees • Overall dimensions without extension tables: 75 x 62 x 80 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale • On-site inspection and operation check possible • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport by MDD fleet, courier companies, or external carriers • We offer financing support in the form of leasing or lease loans

Condition: new, Year of construction: 2019, functionality: fully functional, saw blade diameter: 565 mm, cutting height (max.): 125 mm, overall weight: 350 kg, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, table width: 2,400 mm, input voltage: 380 V, saw drive: 4,000 W, spindle speed (min.): 2,800 rpm, spindle speed (max.): 2,800 rpm, height adjustment type: mechanical, main saw diameter: 565 mm, saw blade speed: 2,800 rpm, Equipment: CE marking, saw blade guard, We offer for sale a radial saw in like-new condition, suitable for precise sizing and angled cutting of large cross-section timber. VAT invoice available for businesses. Viewing possible on weekdays by prior arrangement in Derecske. We can assist with loading. Lrjdsxv Tn Ropfx Aagsh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Semi automatic double head cutting machine used for alu/PVC profiles. Ledpfxsygwt Hs Aagerh Very good condition, in production.

Condition: good (used), Cap saw, PEGIC mitre saw Ledstrwvrepfx Aagjrh Specification: - blade diameter - max 200 mm - engine power - 0.8 HP - spindle - 20 mm - cutting adjustment +/- 45 degrees - cutting cross-section - 4 x 14 cm - overall dimensions 50 x 48 x 70 cm ( W x D x H ) Additional information: * factory technical and visual condition * presented photos illustrate the actual state of the object of sale * possibility to turn on and check the device on site. * the price listed in the auction does not include VAT.

Condition: good (used), In today's auction I have to offer you a kap saw / mitre saw from the excellent Italian company OMS model T14 with a scissor table. Lrsdpfx Aaekt N H Uogoh Below some useful information about the saw: * saw diameter 300 mm * 1700 W motor ( single phase ). * max dimensions of the cut element: 120 x 120 mm ( H x W ). * guards on the saw for the safety of the saw operator. * cutting adjustment +/- 45 degrees * table with dimensions of 32 x 42 cm * extraction stub fi 60 mm. * very good technical and visual condition * 1997 year of production * Complies with CE standards. * overall dimensions of the saw 65 x 70 x 60 cm (width x length x height).

Condition: used, working width 1.700 mm saw-blade dia. 350 mm Lrodpfxjycqigo Aagoh cutting length 1.200 mm

Condition: good (used), Year of construction: 2012, machine/vehicle number: 104 93333473, Offer 26004 Technical specifications: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Maximum cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 335 mm - Cutting range: see attached diagram - Swivel range inward, pneumatically operated: 90° - 22.5° - Tilting range inward, pneumatically operated: 90° - 45° - Saw blade speed: 2,800 rpm - Drive: 400 V / 2 x 4,000 W - Compressed air connection: 7 bar - Air consumption per working cycle: - without spraying: approx. 40 l - with spraying: approx. 64 l - Space requirement: approx. W 8,500 x H 1,800 x D 1,800 mm - Weight: approx. 1,800 kg - Includes: - ELUMATEC E 355 control system, - Saw unit swivelling and tiltable for high and wide profiles, Lrsdpfoyghxyex Aagjh - Also suitable for compound mitre cuts, swivels inward up to 22.5°, - Digital degree display, - Separate control cabinet, - Timed spray unit