Used Double Head Mitre Saw for sale (30,713)

Condition: excellent (used), ELUMATEC MSG 105 saw 420mm blades Dwodpfel E Ickox Adusc EU transport ~300 euros

Condition: new, Year of construction: 2024, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm Dodpfxjiy Ry As Adujwc rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

Condition: reconditioned (used), Cross cut saw 9 meter with 4 heads. Very good condition. Dwsdpfxevb I S Eo Aduec

Condition: used, - 2250 mm Cutting width Djdpfx Ajhkm A Nedujwc - 80 mm cutting height - 2x 3,7 KW saw motors

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg Djdpeupmv Uofx Aduewc 1707 connected load frequency 400 V 230 V frequency 50 Hz generator - rated current 8 A output 4 kw saw-blade dia. 400 mm ja

Condition: used, Year of construction: 1995, Dimensions: H = 1950 mm Dwsdpfx Adolp Idlsuec L = 3860 mm D = 2300 mm

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame Djdpfx Adsvyidmouowc o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Further data: See PDF Dwedpfx Ajw D Dfxsduoc

Condition: excellent (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 6145, cutting height (max.): 75 mm, cutting width (max.): 200 mm, cutting length (max.): 6,000 mm, saw blade diameter: 450 mm, type of input current: three-phase, cross cutting line with infeed opticut and 6 automatical packing/stacking units , partly renovated ( more details by contacting ) Dwjdpfjw I Dpqsx Adujc

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm Djdsg Db U Aspfx Adujwc spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw drive: 31,000 W, total length: 17,000 mm, total height: 1,000 mm, height adjustment type: mechanical, total width: 2,500 mm, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Dwedpswa T Dcsfx Adujc Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: used, Year of construction: 1988, functionality: fully functional, Equipment: double-sided, Fully Automatic Coffin Cutting Line with Moulding Feeder – Special-Purpose Machine by MBM For sale is a fully automatic, double-sided coffin cutting system with integrated moulding feeder for processing base strips, as well as bead and lid mouldings. The machine is equipped with a gluing station for automated adhesive application to the mouldings. Features & Specifications: Manufacturer: MBM Design: Special-purpose machine – unique in this configuration Dwodsw Ihdlepfx Aduoc Application: Automated cutting of coffin parts (double-sided) Includes: - Moulding feeder for base, bead, and lid mouldings - Gluing station - Material infeed and outfeed conveyor belts (one belt is defective and must be replaced) - Offcut conveyor belt for automatic scrap removal Status: Already dismantled and ready for loading and transport This specially engineered system enables efficient, fully automatic serial production in coffin manufacturing with precise cutting and integrated moulding processing. Ideal for manufacturers prioritising productivity, quality, and process reliability. Sale is made without any warranty. Incoterms: EXW 91550 Dinkelsbühl, Germany

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Dwedpfx Asw E D E Ueduec Connected load: 9.37 kW

Condition: used, cleaned, partially refurbished, with new support plate used, in good condition Manufacturer Graule Dwedpfx Aow En Igjdusc Type ZS 85 N GS-certified Motor 2.5 kW 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm Swivels right Swivels left Tiltable up to 45° Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in the actual condition as inspected, without any warranty or guarantee

Condition: excellent (used), Year of construction: 2013, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Max. saw profile 80 x 100mm Dwsdot Rn Smepfx Aduec Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85 KW Magazine for elements. Return of the element to the operator Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure Dsdpfx Adsq Ii Dlsuowc The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Dwodpfswwhhdex Aduec Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW Dsdpfx Adsw Aqndeuswc - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec.

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Dwjdpsgixvwsfx Adusc Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: good (used), Blade diam 420mm, lenght 4,800mm. Dwodpfx Aewzvacjduec

Condition: excellent (used), Year of construction: 2015, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85 KW Magazine for elements. Return of the element to the operator Dwodpjrcb Tljfx Adujc Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Dwjdpfx Ajwzavujdusc Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Dodpfjvz Hxqex Adujwc Weight 3500 kg Total power requirement 94,75 kw

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Djdpfxswhn T Uo Aduswc

Condition: new, Year of construction: 2025, A700 Fully Automatic Mitre Solid Wood 6 m Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Djdpfx Adjmdq I Dsuowc Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Mitre timber structures manufacture • Bulk timber cutting • Furniture manufacture • Planters and boxes manufacture Model: A700 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.