Used Double Miter Gauge for sale (17,632)

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable Dodpfx Astxkproduswc -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping Dedpfxewqpmne Aduowc - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm Dsdpjiqt Rlefx Aduswc - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Year of construction: 2020, condition: new, Double-sided mitre stop Year of manufacture: 2020 For fast and stepless production of mitre cuts on narrow and short workpieces at any angle from 0° to 90° For crosscuts up to 1375 mm Easy handling and quick installation on the saw's roller carriage Dsdpfx Adskwhaljuewc Suitable for Panhans models 680_10_20 Conversion kit for other models available on request Availability: short-term Location: Hochheim

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Dwodpfjxc Tyysx Adujc Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Dwodpegd Si Eofx Aduoc Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: good (used), Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Manufacturer: Kaltenbach, double miter saw type DKL 500 Dsdpfx Aeh U U S Rsduswc -Cutting length: 245 to 4180 mm -Saw units: 45° pivotable -Saw blade: Ø 490 mm -Accessories: incl. Saw blades see photos -Total dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Year of construction: 1985, condition: good (used), Offer 22556 Technical data: - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm Dwsdeimdlropfx Adusc - weight approx. 1400 kg - with: - cutting length adjustment with positioning control - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Djdpfx Aoqbr Suoduswc Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 420 mm, saw blade speed: 2,800 rpm, air pressure: 7 bar, Double-head saw for cutting aluminium and PVC profiles. Features a short-length stop, E555 electronics, two sliding profile holders. Rollers on the movable head. Lubricators for blade lubrication when cutting aluminium. Dedpfx Aoxb Anqjduewc

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Dwsdpfx Ajkfvhkoduoc Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 2022, condition: new, angle: 0° - 90° max cutting length: 1370 mm Dwodpfji Ezr Nox Aduoc

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm Dodovyidmepfx Aduswc +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Dodpfow D Dfxex Adujwc Further data: See PDF

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Djdpfxsgixvwo Aduewc Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: good (used), Blade diam 420mm, lenght 4,800mm. Dodpfx Adewzvacsuswc

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. 6.000 mm Dodshvrz Topfx Aduewc

Year of construction: 2005, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 401, This machine has got very little use as it was used as a backup saw. It has been taken out of the production line as we needed the space for a new Schirmer machining center. This Rapid DGL functions as new and is ready for shipment if sold. We have the necessary equipment required to load onto a truck if required. Dwjdpowgygwefx Adujc

Condition: used, Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler Dedpfxsgzc Iye Aduswc -Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA -Motor: Himmel 3.0 kW / 2790 rpm -Saw unit: swivels 45 ? -Saw blade: O 410 mm -Price / fee: complete -Dimensions: 1060/760 / H680 mm -Weight: 240 kg

Condition: ready for operation (used), Technical characteristics cut of MDF WOOD and PVC molding at 45 ° double horizontal blades inside rake angle Largeur de coupe130 mm Hauteur de coupe100 mm Diamètre lame300 mm Power and Motors Overall dimensions Lenght: 1400 mm Width: 1600 mm Weight: 500 Kg Dwodpfx Aeuaihmsdusc

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Dwsdpfewprmzex Aduec Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: new, Year of construction: 2025, 3 NC axes for length as well as electronic tilting of the saw blades outwards 22.5° and inwards 135° Cutting length 5000mm Processing of individual cuts Processing of cutting lists Creating cutting lists via keyboard Import of cutting lists via USB storage device or over network Corner angle automatic/incremental cut Overlength cut processing Short cuts from 5mm cutting length Cross cuts Manages printing of labels with data or barcodes Hydropneumatic saw blade feed, continuously adjustable Pneumatic protective hoods Moving roller conveyor at the right saw unit with additional clamping cylinder Length positioning taking into account the saw angles and profile height Dwedpfx Ajwnfvteduec Profile height measurement with length compensation incl. horizontal clamping cylinder Each saw unit has one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder at the fixed saw unit left of the saw blade 1 piece profile support between the saw units, pneumatically swiveling With 2-hand control IPC with Windows Embedded and HMI 15.0” touchscreen Incl. the options Minimum quantity spray devices Label printer Network connection for teleservice, 1 year duration We always have suitable extraction systems in stock, also for already existing aluminum saws!

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Used for cutting aluminum PVC profiles - Hydro-Pneumatic cutting process - Adjust cutting speed according to profile - Right and Left -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 can cut at fixed angles. - Pneumatic vertical and horizontal press - Ø550 millimeter Aluminum saw with diamond tip Dedporahzgefx Aduswc - Roller conveyor is available (3 meters right and left) - Oil spray system - 3 Kw Motor and Hydro - check for precise cutting

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable Dwjdpfxjgy Dbde Aduec -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm Dedpsgylq Ijfx Aduowc -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg