Used Double Head Mitre Saw for sale (30,460)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Dcodpfx Afjw Sy Uke Ijn Storage location: Garbsen

Condition: used, The Elcos 108 Double head paper driller is a robust and efficient machine designed for simultaneous drilling operations. Equipped with two drilling heads, this machine enhances productivity by allowing two holes to be drilled at once. It is currently available in stock and located in Germany. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The Elcos 108 is well-suited for various applications requiring precise and efficient paper drilling, making it a valuable addition to any production environment. Dcjdpfx Ajvfx Npof Ion Equipment: Two drilling heads.

Condition: used, Double edger / Edger line / Multi-blade circular saw Dsdpfx Afoxhbxne Ijcn Wurster & Dietz LB 12 0-line left Right-hand machine (adjustable saw blade right) max. pass-through height: 100 mm max. pass-through width: 65 mm with 5-strand cross conveyor as feed with 2 crosscut saws with roller infeed table with laser with lath head with chip separator with spiral roller conveyor (length: 9 meters) with discharge table (cross conveyor 5-strand) (length: 5.2 m, width: 2.2 m) Location: Austria, near Ried im Innkreis

Year of construction: 1980, condition: good (used), ULMIA mitre-saw 1630 Blade dimensions Ø of 300 mm Speed range Dodpfx Afjd Ddgpj Iecn 95-3000 rpm Overall performance 1,1 kW Masch. Weight 270 kg Dimensions (W x D x H) 0.9 x 0.73 x

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Dcodpev Ed Uwjfx Af Ien Technical data: - Track width: 340 mm - Shaft width: 360 mm - Disc bore diameter: 70 mm - Max. disc diameter: 315 mm - Max. cutting height: 180 mm * from above - Pulling shaft, toothed, pneumatically pressed - 2 rows of kickback guards - 3 pressure rollers, sliding, smooth - Kickback guards - Shaft with sawblades - 3 sliding, smooth pressure rollers - Kickback guards * from below - Infeed pulling shaft, toothed - Track - Shaft with sawblades - Track - Stepless feed speed adjustment via frequency inverter - Main motor: 2x55 kW - Feed motor: 4 kW - Electric raising/lowering of upper body - Electric adjustment of shafts with sawblades - Central lubrication - Extraction nozzle diameter: 2x150 mm - Dimensions (L/W/H): 2800x2400x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian production – Two-shaft design – Ideal for large workpieces – Used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,000 EUR exchange rate 4.25 EUR (Prices may change in case of higher fluctuations)

Condition: new, saw-blade dia. 210 mm Cutting height 70 x 305 mm Cutting height at 45° 35 x 305 mm saw blade turning speeds 4500 U/min Motor output 1,5 kW machine weight ab. 9 kg Dimensions (L/W/H) 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key Dcjdsu Imnispfx Af Isn anthers 2x side supports

Condition: used, saw blade diameter: 500 mm, overall weight: 2,200 kg, working range: 5,000 mm, Double-Head Electronic Cutting-Off Machine – for aluminum and PVC profile cutting Technical Specifications: - Electronic angle adjustment - Electronic blade tilting - Blade diameter: Ø 500 mm - Outward tilting cutting heads Dsdpewm N Tajfx Af Iocn - Useful cutting length: 5,000 mm - Pneumatic clamps for workpiece locking - Central support for long profiles - Blade rotation speed: 2,800 rpm - Overall transport dimensions: 6,800 x 1,600 x 1,615 mm (h)

Year of construction: 2014, operating hours: 2,800 h, condition: good (used), machine/vehicle number: 4198, Rotating-head bridge saw for natural stone, ceramics, and engineered stone Support travel X-axis: 3600 mm Support travel Y-axis: 4630 mm Z-axis height adjustment: 400 mm Saw blade max.: 725 mm Max. cutting depth: 255 mm Spindle motor speed: 800–6000 rpm Equipment: Vacuum separator Automatic material measurement Automatic tool measurement Camera Tilting table 3500 x 2000 mm Table extension 3500 x 430 mm Control cabinet air conditioning Automatic central grease lubrication Rubber table cover Laser Adapter for finger milling cutters GMM software: - GMM CAD - GMM Mini CAD - GMM Parametric Figures Dodjw N Hdgopfx Af Iocn - GMM Profile Saw Automation - GMM Teach-In with point laser - GMM Contour Milling

Condition: good (used), Year of construction: 2005, OMGA opti cut IDC000080 - Manufacturer: OMGA - Year of production: 2005 - including table before and after - Control cabinet - Working condition Dcedpst D Dukjfx Af Ijn

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill drilling unit Manufacturer: Suhner Dcjdpfod Huvqsx Af Ien Model: Sumatic BEM 20 + Polydrill kW: 2,2 V: 380/220 ; 460/230 A: 5,7/9,8 ; 4,9/8,5 Hz : 50/60 rpm : 940 / 1150 spindle adaptor : 13 mm 25-125 mm double spindle drill head

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Dsdpfxovvkm Ij Af Ijcn Storage location: Nattheim

Condition: new, saw-blade dia. 305 mm Cutting height 105 x 340 mm Dedpfx Afeu Immrj Ijcn Cutting height at 45° 60 x 340 mm saw blade turning speeds 5000 U/min Motor output 2,0 kW machine weight ab. 25 kg Dimensions (L/W/H) 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports

Condition: excellent (used), CATALOG NUMBER 7044 TECHNICAL DATA - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum raw material length: 620 mm - Top: 4 sliding rollers - Upper rollers act as material pressers - Bottom: pulling chain Dcodpfx Aomih Sfjf Isn - At the outlet: metal sliding rollers at the top and bottom, 1 pc each - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total outlet chute dimensions (L/W/H): 3150x700x870 mm - Total machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Condition: very good, – used saw Net price: 7,900 PLN Net price: 1,860 EUR Net price calculated according to exchange rate 4.25 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: excellent (used), Omga V 113 P double mitre saw for frames Dodexc Nduopfx Af Iecn Double saw set at a 45-degree angle Blade diameter: 300 mm Blade bore diameter: 30 mm Two 1.1 kW motors Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Table extensions

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls Dcedpfx Afjwrw D Rj Isn ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser Dcjdpfx Afjxfr Eto Ijn rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 CE marked 400 V

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic) Dcsdpfoxcp Iasx Af Ijn

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base - Emergency stop mushroom push button Dcjdpfx Aewwaz Aof Ion Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic blade extension - sawing units adjustable at 45° - manual spacing of sawing units - min. cutting length at 90° 300mm - max. cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90 degrees 90mm - pneumatic clamps 2pcs - control buttons Dedpswbz Uxjfx Af Iocn - material support 3pcs - main engine 2×1.1kW - diameter of the exhaust port 2x90mm - dimensions L/W/H 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable sawing units - used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - 4.5 kw Dsdsqmpnaepfx Af Iscn - Blade diam. 330 mm - V. 380/50 - S/N 99T318 - Year 1999

Condition: used, 6 head band saw IDC000078 - manufacturer: Forestor Dcodpfet D A Suox Af Isn - 6 head band saw - complete with electric cabinet - complete with electric cabinet - With infeed table - with band sharpener - used for block cutting

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system Dcedpswqpmnsfx Af Isn - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: used, Horiz. Mitre bandsaw KNUTH with minimum quantity lubrication type HB 250A Bandsaw for metalworking with swivel saw frame. Serial no. 201603004 Year of manufacture 2016 Sawing range at 90° round Ø 225 mm Sawing range for 90° square 190 x 190 mm Sawing range for 90° rectangle 245 x 150 mm Sawing area at 45° round Ø 145 mm Sawing area for 45° square 145 x 145 mm Sawing area for 45° rectangle 200 x 145 mm Sawing area at 60° round 90 mm Sawing area at 60° square 90 x 90 mm Sawing area for 60° rectangle 110 x 70 mm Dcedpfx Ajrvm Npjf Ion Saw band 2480 x 27 x 0.9 mm Roller diameter 290 mm Belt speed 45 / 90 m/min. Compressed air requirement approx. 5 bar (minimum quantity lubrication) Working height 910 mm Motor power 1.1 kW Connected load 400 Volt, 50 Hz - Saw blade speed via 2-stage electric motor - Infinitely variable lowering via hydraulic lowering cylinder - Automatic limit stop after material average - Infinitely variable swivel saw arm for mitre cuts up to 60° - Pressure gauge for band tension - Vice with short-stroke quick clamping device - Coolant device with electric pump - Minimum quantity lubrication UNI-Microspray I (year of manufacture 2017) - Workpiece stop Space requirement L x W x H 1450 x 700 x 1450 mm Weight 185 kg Very good condition

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - max disc diameter 300 mm - spindle diameter 30 mm - blade covers 2 pcs - pneumatic cutting (disc movement up/down) - saw units adjustable at a 45° angle - manual spacing adjustment of saw units - min cutting length at 90° 220 mm - max cutting length at 90° 2820 mm - cutting width 110 mm - cutting height at 90° 90 mm - pneumatic clamps 2 pcs - control foot pedal - material support - main motor 2×1.6 kW - dimensions L/W/H 3620x1100x1250 mm Dcodpfxjmv E Hxj Af Ijn - weight approx. 500 kg – unpainted – tilting saw units – used saw, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the EUR/PLN exchange rate 4.25 (Prices may change with significant fluctuations)

Condition: used, Double rip saw IDL000811 Dcodpfx Afju At Tbj Isn - max width: 2500 mm - electric cabinet - manufacturer: Tegle/norway