Used Ingersoll for sale (66)

Year of construction: 2000, condition: used, used compressor year of manufacture: 2000 technical data to follow Lsdpfxjy Iub Ee Aiishh availability: short-term storage location: Röllbach

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system Lhsdezgckvspfx Aiioh - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Lhedpfozfx S Hjx Aiijh Filter system Fire extinguishing system

Year of construction: 2001, condition: ready for operation (used), Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, year of manufacture: 1979, max. operating pressure: 15bar, air flow rate: 1400l/min, power: 15HP. An on-site inspection is possible. Ljdpfxozf Nc Ae Aiiohh

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. Lhjdoy Ry E Uepfx Aiieh This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Industrial air systems Compressor refurbishment specialists Spares or parts use Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Condition: excellent (used), Year of construction: 2016, X-axis: 1,000 mm Lhedpfx Aszcpltsiioh Y-axis: 1,510 mm Z-axis: 700 mm Max. workpiece dimensions: 1,770 x 1,270 x 650 mm Max. workpiece weight: 7,500 kg Connected load: 22 kVA Machine weight: 12,500 kg Includes multi-change electrode changer, 142 positions. Includes documentation. Machine is available immediately and can be inspected while powered on!

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking Ledpfjyxyz Ssx Aiishh 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Subject to prior sale.

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Lhjdpfxsym Tx Sj Aiish Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Lhodpfewric Eex Aiioh

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, controller model: Mitsubishi 32-bit EDM Steuerung, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 300 mm Max. workpiece size X: 700 mm Max. workpiece size Y: 500 mm Max. workpiece size Z: 250 mm Max. electrode weight: 50 kg Ledpfxezapylj Aiijhh Max. workpiece weight: 500 kg Table size X: 550 mm Table size Y: 470 mm MACHINE DETAILS Control: Mitsubishi 32-bit EDM control Electrode changer: 20-position Generator: 50 A EQUIPMENT Lowerable container

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg Lhodjrfyrpopfx Aiieh mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: excellent (used), Year of construction: 2020, Ingersoll Rand D480IN-A Refrigerated air dryer Ljdperk Rp Ejfx Aiiehh 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Condition: good (used), Year of construction: 2011, Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph Lhodpferk Rqbsx Aiijh

Condition: used, Equipment: soot filter, - Particle filter - Hydraulically extendable up to 5 meters + 1.8 m spreading width, total 6800 mm - 7,500 operating hours - Track chassis Ljdpfxszbza He Aiishh

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor 225 Kw Lhsdpfx Aiju Ic Ryoieh Year 2012

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor Lhedpfju Idnasx Aiieh 110 Kw Year 2008

Condition: good (used), Year of construction: 1998, CNC die sinking machine INGERSOLL HANSEN Type: GRANTRY 1000 Year 1998 Control MITSIBISHI 64 Bit CNC multipuse Generator 70 Amp Travels : X 700 mm Y1350 mm Z500 mm work bowl : 1000 mm X1600 mm X 550 mm Lhedpet Dbaksfx Aiish Table load max : 3000 Kg Cooling system , Documentation available Data backup available Accessories Tool holder Hirschmann .

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Ljdpfx Aevwgmgeiishh Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. - Tool holder: HSK-E 40 - For further technical data, see the images. - Includes technical documentation. - Includes HSK-E 40 tool holders and three pallets. Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. Ledpfey Tvcuox Aiiehh FCA D-80339 Munich - loaded onto a truck.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 Ledpfx Aisy Tu Ddoijhh - Distance HSK tool holder – table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet. - With technical documentation - With workbench and accessories, including HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Note: The item must be picked up between July 21st and 23rd, 2026, on a date to be confirmed. FCA D-80339 Munich - loaded onto a truck.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 38 kVA, total height: 2,300 mm, total length: 3,300 mm, total width: 2,200 mm, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, input voltage: 400 V, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 550 CNC machining center (5-axis) - Distance between HSK-E tool holder and table: 450 mm - Swivel angle of A-axis: -120°/+60° Lhedpey Tutlefx Aiieh - Swivel angle of C-axis: n x 360° - Tool holder: HSK-E 40 - Clamping surface with 4th and 5th axis: Pallet dimensions: approx. 300 x 300 mm - Maximum travel speed: 30 m/min - Repeatability: 0.002 mm - Digital display: 0.001 or 0.0001 mm (selectable) - For further technical data, see the photographed images - Includes technical documentation - Includes three spare pallets - Note: Specific fixtures have been attached to the pallets - Includes HSK-E 40 tool holders Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,536 h, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours 1536 erosion hours 997 operating days Cleaned, measured, tested, and various wear parts replaced. EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High Speed Jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Lhjdpfx Aoy Ti Htsiioh CO2 fire extinguishing system Cooling unit

Condition: used, functionality: fully functional, Set of impact wrenches in original case with accessories (hose, manual, socket inserts). Professional tool for loosening stubborn fasteners in automotive, steel construction, or industrial applications. Features speed/torque control on the tool. Total price: EUR 380 net, negotiable, for all 3 units + accessories. Individual sale of the sets is possible (approx. EUR 150-180 per case set). Technical specifications: - Quantity: 2 sets in a case + 1 additional wrench with carrying handle (visible in the photo) - Drive: Compressed air - Accessories: Hose, operating manual, original bag - Brands: Industrial (Atlas Copco / Ingersoll-Stil) - Condition: fully functional Lhsdpfjzacfhox Aiieh Pickup/transport: Shipping as a package is possible, or self-pickup in Stralsund. Individual sale is possible.

Condition: used, functionality: fully functional, Collection of industrial pneumatic impact wrenches. Various manufacturers (Ingersoll-Rand style and comparable), different drive sizes (1/2 and 3/4 inch). All units include a pneumatic hose with a quick-release coupling. These come from a workshop and have been used regularly – typical professional-grade tools. Lhodozabykepfx Aiish Suitable for automotive workshops, tire service, steel construction, plant construction, and heavy-duty fastening applications. Also interesting as a source of spare parts or backup units. Collection price: EUR 320 net, negotiable, for all units; individual sales are possible (approx. EUR 80-120 per impact wrench). Technical specifications: - Quantity: 4-5 impact wrenches - Drive: Pneumatic (6-7 bar) - Drive sizes: 1/2 inch and 3/4 inch (mixed) - Hose connection: Quick-release coupling NW 7.2 - Individual models can be viewed on site; nameplates available upon request. Pickup/transport: Shipping as a package is possible or self-pickup in Stralsund. Individual sales are possible.

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Lhsdpfx Aiou Axzksieh Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition