Used Dehumidifier for sale (56)

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Gbjdetty Rajpfx Ad Ijp Air volume: ≤ 265 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Gjdpeuy Thmjfx Ad Isbp Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Gsdpfxoyzaame Ad Iobp Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: like new (used), Year of construction: 2022, overall weight: 250 kg, BOGE DS 350 refrigerant air dryer Gbjdoxcb Edjpfx Ad Isp

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Gsdpfxjyutnpo Ad Isbp Serial no. 302210 Net price: EUR 1,100 negotiable.

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Gjdpfx Adoypb Duj Iobp Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Gedpfsx Eifksx Ad Ijbp Extreme drying of compressed air for electronic component manufacturing

Year of construction: 2021, condition: like new (used), For sale Food Dryer - Dehumidifier. Used a few times. Max. indoor temperature: 60 degrees Celsius. Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz Gedoibwb Tspfx Ad Iobp More parameters in photos. If you have an questions on this, please do not hesitate to contact us.

Year of construction: 2014, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 30 CAPACITY 3 M3/MIN, YEAR OF PRODUCTION 2014 Godpfx Adei Atuds Ijbp THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Gbjdpfx Ask Nb T Dsd Ijp Capacity 9.5 m3/min year of manufacture 2015, THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Weight: 128 kg Max. air pressure: 13 bar Gbedpfxjydnyxs Ad Iop Max. ambient temperature: 46 °C

Condition: used, Year of construction: 2010, machine/vehicle number: PR28, Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic System dehumidifier; Plastic System hopper H6000H; Plastic System mold-area dehumidifier DSH 2004 MIC DISP; conveyor; palletizing systemMaterial processed: PETAdvanced Automation & Control SystemsThe cell integrates a Sytrama REV 156 PET robot for automatic take-out and part handling, supporting stable cycle times and consistent product quality. The machine is equipped with an electric charging unit and hydraulic accumulators for fast, repeatable injection phases. Operator-friendly controls and interlocked safety guards help streamline setup and routine operation.Automated take-out and transfer via Sytrama robotAccumulator-assisted injection for stable, fast cyclesIntegrated dehumidification and material handling for resin conditioningElectrical specifications: 400 V, 50 HzEngineered for quick, repeatable mold changes and efficient maintenance accessProduction Line Integration CapabilitiesThis injection cell can operate as a standalone preform production unit or be integrated upstream of stretch blow molding in a PET production line. The included dehumidifiers, hopper loader, conveyor, and palletizing system simplify in-plant logistics and align with broader bottling equipment and packaging machinery workflows.Standalone or inline operation with PET packaging linesDehumidification and hopper loading optimize PET resin preparationConveyor and palletizing system support downstream handling and warehousingIdeal for beverage production environments targeting consistent preform supplyMachine Condition & Maintenance HistoryThis second hand injection molding machine is presented in operational condition and ready for immediate use after standard site preparation and commissioning. The core press is year 2014, with the SACMI mold and auxiliaries from 2010, providing a balanced mix of robust mechanics and proven proce... Gbjdpfx Adezktdbj Iep

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm Gbedpfx Adezizmne Iop External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Gbsdpfx Aezizmbjd Iep Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) - Glycol chiller for CCTs Gbsdpfx Ajyb R Iajd Ijp - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Year of construction: 1999, condition: good (used), Granule dryers, compressed air dryers, continuous dryers, granule drying systems -Manufacturer: digicolor, Granule dryer type Dehumidifying Dryer -Model: DT 204 M -Power: 10000 W Gsdjlb Iv Nepfx Ad Iobp -Side channel blower: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Condition: like new (used), Year of construction: 2008, 15 MVA oil transformer, with conservator, Buchholz relay, air dehumidifier, tap changer; Siemens, 2008, connection group Ynd5, complete transformer documentation available Gedpfx Adeugg Dfe Ijbp

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed Gbsdpfx Aozhcrved Ijp 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Gbodpfxozbypys Ad Iep Operating manual and wiring diagrams Video available when powered on  

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. Gbsdpev Dit Nofx Ad Isp −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: used, Year of construction: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer 19 steps, switching group YNyn0, with expander, Buchholz relay, dehumidifier, fan, dial thermometer, year of manufacture 1978 Gjdpfst Akl Hox Ad Ijbp

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Gbedsw Tduwspfx Ad Iep Power: 0,29 kW Current: 2,0 A Voltage: 230 V Frequency: 50 Hz Position: free standing

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Gbedpfx Adsvgutae Ijp Air transport cca 100m – Europool, Italy For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.

Condition: good (used), Year of construction: 2017, machine/vehicle number: API262376, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Godpov Drrbofx Ad Iobp Technical data: YEAR: 2017 CAPACITY (kW): 15 OUTPUT (m3/min): 2.51 CIS (bar): 12.75 HOURS (DOC/GENERAL): 25107 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes

Condition: new, Year of construction: 2026, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Gbsdpfx Adsmqlqds Iop