Ultrafilter ultraaqua autoclean 0016 AC condensate treatment filtration unit

Donaldson ultraaqua autoclean 0016 AC

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Chedpfx Agszp Itusrjd Maximum bar diameter: 66 mm X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Spindle bore: 66 mm Tool probe Chip conveyor Tooling included Documentation

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor Chsdpfx Agjvtz Dxsrjd - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: used, Year of construction: 2014, Manufacturer Chsdpfxozmh R Ue Agrsd Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Technical values: 81.2 L/s, 13 bar. Chjdpevmpt Usfx Agrod Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Weight: 520 kg

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. Cjdpfeh Rdxnsx Agrjhd The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Cedpfxjzzap Eo Agrohd Chip conveyor Parts collector Set of tool holders, including 2 motorized ones Presetting tools Chip conveyor Parts collector Set of tool holders, including 2 motorized ones

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Bar capacity Ø42 mm / 6,000 rpm Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Standard Equipment: Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW Chsdpfoy A Exkex Agrod R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 639 mm, turning diameter: 255 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 500 mm, spindle motor power: 15 W, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,030 mm, total length: 2,840 mm, total width: 2,190 mm, overall weight: 9,300 kg, Equipment: documentation/manual, This CNC lathe has been fully inspected and overhauled directly by the manufacturer, CMZ. The work included replacing the main components subject to wear, restoring the geometries, and completely realigning the machine, bringing it back to a condition of high precision and reliability. Key features: - CNC FANUC 31iTB iHMI - Main and secondary spindles - Double turret with Y-axis - Removable tool presetter - Chip conveyor with lateral discharge - Second high-pressure coolant pump (8 + 15 bar) - Used IEMCA MASTER 80 bar loader available upon request Main overhaul operations: - Replacement of the B-axis slides - Replacement of the belts and seals of the main and secondary spindles - Installation of a new complete secondary spindle assembly - Overhaul of the B and lower Z axis guards - Restoration of the machine's geometries Chsdpfx Agjzlymxorod - Realignment of the S1 and S2 spindles - Realignment of the turrets - Complete check of the powered tools Upon request, we can provide a complete list of the operations performed and photographic documentation of the main stages of the overhaul carried out by the manufacturer. For over 30 years, Otto Machine has been selecting and selling used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2018, functionality: fully functional, Hwacheon T2-2T YSMC dual turret and dual spindle CNC lathe, year 2018, equipped with SIEMENS SINUMERIK 840-D control, high-performance machine for complex and simultaneous operations, ideal for high-precision series production. Main technical specifications: Max. swing diameter over bed: Ø 880 mm Max. turning diameter: Ø 460 mm (main spindle) / Ø 390 mm (sub-spindle) Turning length: 444 mm (upper carriage) / 437 mm (lower carriage) Bar capacity: Ø 65 mm (main and sub-spindle) Axis travels: X1: 245 mm / X2: 210 mm Z1/Z2: 520 mm Y: ±50 mm (total 100 mm) B: 550 mm Rotary axes C and A: Resolution 0.001° (360°) Spindles: Speed: 50 ÷ 5,000 rpm Power: 11/15 kW Spindle nose: ASA A2-6 Sub-spindle chuck: Ø 210 mm Tool holders: Upper/lower turret: 12 stations each, driven Driven tools: 6,000 rpm, power 5.5 / 7.5 kW Tool size: 25x25 mm (turning), Ø 40 mm (boring) Rapid traverse: X1/X2/Z1/Z2/B: 30,000 mm/min Y: 15,000 mm/min Csdpfxswt S N Do Agrehd Included accessories: TOP AUTOMAZIONI MAGIC bar feeder TOP AUTOMAZIONI RETURN D.65 automatic parts unloader Chip conveyor Coolant tank with pumps and two high-pressure pumps Various fixed and driven tool holders Tool presetting arm with dual head Manuals, electrical diagrams, CE declaration Complete and high-performance machine, perfect for high-productivity multitasking turning.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 210 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 Chedpfx Ajv R Hwfogred - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 210 [mm] - C axis indexing precision : 0,001 [°] - Travel : 550 [mm] UPPER RIGHT TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 245 x 520 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.5 [kW] LOWER LEFT TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 210 x 520 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.5 [kW] POWER SUPPLY - Total installed power : 85 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5000 x 3500 [mm] - Machine height : 2500 [mm] - Machine weight : 9500 [kg] MACHINE HOURS - Number of working hours : 5811 [h] EQUIPMENT - CNC : Fanuc 31i-Model A - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 2 x 15 [bars] * with cooling unit for coolant - Chips conveyor : Droite - Parts catcher - Parts conveying strip - Bar loader : IRCO SIMAG 70.1 - Tool probe - Number of turning tool holders : Porte-outils radial x3 / Porte-outils axial x2 - Number of fixed tool holders : Voir photo - Collet chuck : 2 x HAINBUCH