Used Dmg Dmf 250 Linear for sale (390)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 23,197 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 7, This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details. • number of cross slides 3 • main spindle yes • sub spindle yes • max turning diameter 50 mm • max turning length 550 mm • main spindle speed max 5000 rpm • sub spindle speed max 5000 rpm • main spindle power 11 kW • sub spindle power 11 kW • driven tool speed max 6000 rpm • turret speed 401 rpm • X1/X2 axis travel 160 mm • Z1/Z2 axis travel 550 mm • Y axis travel ±40 mm • rapid traverse speed 30 m/min • electrical connection 34 kVA • max current 135 A • tailstock force 300 daN • tailstock stroke 510 mm • tailstock connection MK3 • coolant tank capacity 980 l • coolant filter 50 µm • coolant pump pressure 20 bar • collet size 52 • max hex 43 mm • max square 35 mm • 3-jaw chuck type BBD 140/39 • optional accessories tool holders driven tools collets • spindle hours 23198 h • Optional: bar loader • loading area 500 x 630 x 1250 mm • max load 350 kg • max bar weight 40 kg • material diameter range 6 to 70 mm • square min edge 6 mm • hex range 5 to 60 mm • bar length 500 to 1200 mm • spindle liner max length 2000 mm Additional equipment • Tool holders • Driven tools • Collets Dcsdpfxsy Ey U Eo Albol Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), We offer you: 6 pallets for DMC 80 U Price per pallet Dcedpfx Alsyvqfvobol Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information. Subject to change and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Dsdpfx Asyvzl Helbscl Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW Dcsdey Hhwkspfx Albsl • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Year of construction: 1995, condition: excellent (used), Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 rpm Tool holder SK 40 Dsdpfelawavex Albscl Manual swivel rotary table tool holder vice Accesories

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm Dodpfxsvmy Icj Albocl - finished part collector - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: ready for operation (used), Year of construction: 2011, Make: DMG Type of machine: DMC 60 T Year of manufacture: 2011 Control system: Heidenhain iTNC 530 Dodpexg Tdysfx Albscl Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Rapid Traverse: 30 m/min Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m Dedpfx Asxqgrxolbecl About the machine: Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Dcsdpsykbk Refx Albol Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5

Condition: used, Year of construction: 1997, operating hours: 39,500 h, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 1 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, type of input current: three-phase, rotational speed (max.): 8,000 rpm, spindle motor power: 60,000 W, Equipment: rotational speed infinitely variable, We offer this used DMU80P CNC machining center, year of manufacture 1997. Dsdpfx Aloygk I Rebocl If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, Travel paths X/Y/Z: 2350(2x710)/520/520 mm Maximum spindle speed: 12,000 rpm Tool holder: HSK A 63 Tool changer positions: 2 x 32 CNC control: Heidenhain Dedpfx Aloyg Dz Rjbscl

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler Dcsdpjyg Iclefx Albjl • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Dcodpfx Aloyhnxvebol Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: excellent (used), Year of construction: 2007, operating hours: 32,947 h, functionality: fully functional, Deckel Maho DMC 100H duo Block About the machine: Very robust machine. The main spindle was renewed in 2023. Technical Data: - Control: Siemens 840D - Travel range X, Y, Z axis: 1000/1000/1000mm - C-axis travel range: 360° - Clamping surface rotary table: 800x800mm - Rapid traverse: 60 m/min - Spindle speed: 20-12,000 rpm - Tool holder: SK50 - Tool magazine with 60 slots - Network connectivity - Automation interface possible Equipment: - Through-spindle coolant 50 bar with belt filter system - Work area flushing - Rinse gun - Chip conveyor An inspection or test under power on site is of course possible. We are happy to offer you transportation, installation, and commissioning of the machine at your site. All from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. Dcsdpfxoyhwqms Albel We support you! From purchasing your machine, through transport and installation, to commissioning and subsequent maintenance or repair work—you can count on us.

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm Dcedpfxsyhwrcs Albjl - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours: 69,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 40, controller manufacturer: Siemens, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, overall weight: 10,000 kg, table length: 800 mm, table width: 630 mm, controller model: Sinumerik 840D powerline, coolant supply: 40 bar, nominal power (apparent): 69 kVA, rapid traverse Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, spindle nose: HSK63, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, table load: 800 kg, operating hours of spindle: 27,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80U Year of manufacture: 2002 Operating hours: 69,000h Spindle hours: 27,000h Equipment: 5-axis Dcjdsv Eurmspfx Albsl Swivel head Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction NC rotary table as an add-on table Pallet changer Tool magazine 60 places Heidenhain measuring probe Handwheel Rotating viewing window IKZ 40 bar Chip flushing Operating mode 4 + Machine technically serviced and in very good condition + Geometrically within new machine tolerance + Transport and commissioning can be offered separately

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, C axis 0.001 degrees Rapid feedrates 80m/min, 120 station toolchanger, spindle taper HSK 63 Dcsdpfxjwnpzae Albjl spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Bar capacity 38mm, X axis stroke 480mm, Dsdpfswb A Hcjx Albocl Z axis stroke 285mm, spindle speed 6,000 rpm, power 5.5Kw, swarf conveyor.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Rapid traverse 42 m/min Spindle speed range 20 to 14,000 rpm Inline spindle with power 20.3 kW / 14.5 kW (40/100% load) Tool taper SK40 DIN69871 Tool shank according to DIN69872 Tool changer with 20-position SK40 magazine (disc with tool holder in bushing and double gripper) Table clamping area 1,760 x 750 mm Direct position measuring in X, Y, Z axes Dcjdeylpf Sopfx Albol Machine is connected, can be tested.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm Dcodpoytbqvofx Albel X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Accessories/options: - swarf conveyor Dcodpfx Aleytfn Sobel - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 560 mm z-travel 560 mm table surface area 500x400 mm control Siemens type 840 D spindle taper ISO 40 Dcjdpoyt Rw Ssfx Albol spindle turning speed range 8000 U/min type of pallet-changer 2 Rotary table 360 ° Tool changer 40 weight of the machine ca. 11,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain MillPlus, spindle speed (max.): 12,000 rpm, Machining center with measuring probe! TECHNICAL DETAILS X travel: 630 mm Y travel: 560 mm Z travel: 560 mm Number of axes: 4 Table size: 1000 x 600 mm Spindle speeds: 12,000 rpm Dcodpjxb Rqmofx Albol Rapid traverse: 30 m/min Tool changer: 24 positions MACHINE DETAILS Control: Heidenhain MillPlus

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Control system Siemens Sinumerik ONE, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, Tool changer with 24 positions, Linear axes X/Y/Z 24 m/min Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor Renishaw probing system kit Coolant spray gun Enclosure roof Internal high-pressure cooling 20 bar, Bed flushing via M-function Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator, Ø 150 mm, Djdpfxeza Alue Albecl 4th axis package, -Rotary table Lehmann, type: EA-510.L NE with indirect measuring system, Electrical and pneumatic preparation Software preparation for Rotary table machining lRACYL software for surface machining Tilting cycle (Cycle 800) Holding torque spindle clamping: 800 Nm Max. speed: 65 rpm, Center height 150 mm, Rotary table positioned along the X-axis on the right side of the work table, Manual chuck (three-jaw), diameter 160 mm, Tailstock, manual, for NC rotary table, stroke: 40 mm, center height 150 mm, Tropical package, Active cooling unit for control cabinet, Compressed air, external and internal (through spindle center), can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 1800 spindle hours.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Dcodpfx Aleyuc Apjbjl Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Technical Specification Driven Tools Yes Counter Spindle Yes