Used Dmg Dmf 250 Linear for sale (407)

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 500 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rotational speed (max.): 12,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a CTX beta 1250TC with Siemens 840D SL control system Year of manufacture: 2011 Operating hours: 25,500 h Spindle hours: 15,000 h Function-tested and cleaned Machine geometry within new machine tolerances Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment features: - Automatic tool changer - Swivel head as B-axis - Differential pressure chucking main/spindle counter - Workpiece pick-up device - Bar feeder preparation (optional available) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle speed: 5,000 rpm Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle power: 20 kW Tool changer: 24 positions B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm Godpfx Afov Sq R Ssiokc Installation dimensions (approx.): L 7,000 / W 2,300 / H 2,300 mm Weight (approx.): 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: - Fully enclosed cabin - NC swivel head as B-axis - Coolant unit and chip conveyor - Documentation - Geometric accuracy within new machine tolerances Condition: - Machine is fully operational - Geometry within manufacturer’s tolerance for new machines

Condition: excellent (used), Year of construction: 2012, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 1,200 mm, tool length: 300 mm, milling spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 120, Equipment: chip conveyor, The machine was overhauled by DMG Mori in September 2022! The machine is being resold due to project cancellation and has seen very little use since! TECHNICAL DETAILS Left spindle head Chuck diameter: 315 mm Spindle flange diameter: 170.5 mm Spindle bore: 104 mm Spindle diameter at front bearing: 130 mm Drive power (100% duty cycle): 25 kW Drive power (40% duty cycle): 32 kW Torque (100% duty cycle): 280 Nm Torque (40% duty cycle): 360 Nm Speed range: 0–5,000 rpm C-axis speed: 2,000 rpm Right spindle head Chuck diameter: 315 mm Spindle flange diameter: 170.5 mm Spindle bore: 87 mm Spindle diameter at front bearing: 130 mm Drive power (100% duty cycle): 25 kW Drive power (40% duty cycle): 32 kW Torque (100% duty cycle): 280 Nm Torque (40% duty cycle): 360 Nm Speed range: 2,000 rpm Slide 1 Longitudinal travel: 1,200 mm Cross travel: 490 mm Vertical Y-axis travel: ±100 mm Slide 2 Longitudinal travel: 1,200 mm Cross travel: 195 mm Slide 3 Longitudinal travel: 1,200 mm Turn-mill spindle Tool holder: Capto C6 Spindle speed: 12,000 rpm Drive power (100% duty cycle): 20 kW Drive power (40% duty cycle): 22 kW Torque (100% duty cycle): 79 Nm Holding torque, clamped: 1,000 Nm Swivel range: ±110 degrees Tool magazine Number of tools: 120 Max. tool length: 300 mm Max. tool diameter: 80 mm Max. tool weight: 7 kg Tool turret 2 Number of tool stations: 12 Shank diameter to DIN 69880: 40 mm Number of driven tool stations: 12 Max. speed: 4,000 rpm Max. power: 11.3 kW Control: SIEMENS SL Operate 3G MACHINE DETAILS Dimensions & Weight Installation dimensions approx. (W x D x H): 6.55 x 3.46 x 2.40 m Weight approx.: 14,500 kg Operating hours: 17,000 h EQUIPMENT Chip conveyor Off-center turning and milling operations Gear hobbing 5-axis simultaneous machining (contour machining) Differential pressure clamping for main spindle Differential pressure clamping for counter spindle Renishaw workpiece in-process measuring system 3-jaw chuck BBD 315/122 by SMW 3-jaw chuck, BBD 250-78, by SMW Gsdjw Dz U Repfx Afiokc Note: Additional machine details can be found in the attached PDF.

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning diameter over cross slide: 740 mm, turning diameter: 920 mm, spindle motor power: 18 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, milling spindle length: 91 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, swing diameter over cross slide: 740 mm, spindle nose: JIS A2-8, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Mist collector Workarea light Chuck foot switch (double) for main and counter spindle Coolant gun Measuring probe Paper band filter Preparación para trabajar con robot Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Hight 20mm Gsdpfjwkf H Dox Afiokc Max. Weight by robot piece: 5,6kg Working time hours Under power: 23.501 Potencial nominal kVA: 48 Cutting Time: 7.494 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: used, Year of construction: 2016, max. workpiece diameter 460 mm max. workpiece length 705 mm bar passage 90 mm control Mitsubishi M-730UM x-travel 260 mm y-travel 100 mm z-travel 795 mm spindle tunring speed 4.000 U/min drive capacity - main spindle 18,5/15 kW spindle passage 91 mm Spindle speed - counter spindle 5.000 U/min Spindle through - Counter spindle 73 mm Drive power - sub spindle 11/7,5 kW number of tool places 12 Pos. Number of working hours ca. 26440 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Gedpfewpw Tgex Afiekc Technical Features: - Automation - Counter spindle - Ball screw in Y-axis replaced in May 2025 - Main spindle replaced in May 2025 - Maintenance performed according to DMG specifications in May 2025, including DMG maintenance package installed Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2001, Hello. I have a renowned brand of CNC milling machine CINCINNATI Arrow _ 1250 for sale. _ Type: CNC milling machine Manufacturer: CINCINNATI Model: Arrow _ 1250 Control: HEIDENHAIN TNC430 Year of manufacture 2000 _ Machine parameters: - tool magazine: 21 pcs. on SK40 / BT40 - max. rpm 8000/min. - max. travel in the X axis: 1262 mm Gjdpfju Au Aksx Afiokc - max. travel in the Y axis: 562 mm - max. travel in the Z axis: 562 mm - workpiece measuring probe - cooling system through the spindle - measuring rulers in all 3 axes - spindle drive power: 11 KW - chip conveyor - DTR - machine weight: 6 tons THE MACHINE IS IN PERFECT TECHNICAL AND VISUAL CONDITION!!! _ WHY IS IT WORTH BUYING MACHINES IN PPM? - we have our own service _ stationary and mobile - we have already sold over 700 machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Gkjdpfx Aevt Tu Nsfioc Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 390 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,300 mm, bar passage: 65 mm, total height: 2,700 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: DMGMORI Type: CTXbeta1250TC Year of manufacture: 2008 (retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - automatic tool changer - swivel head as B-axis - belt filter system with internal cooling and chip conveyor - differential pressure clamping main/counter spindle - workpiece collection device - preparation for bar loader (optionally available) Technical data: Max. turning diameter 500 mm X-axis 450 mm Y-axis 100 mm Z-axis 1300 mm B axis 220 ° Spindle bore 65 mm Speed 5000 rpm Spindle power 34 kW Gkodpfx Ajubyv Rofiec Counter spindle speed 6000 rpm Counter spindle passage 52 mm Counter spindle power 20 kW Tool changer 24 B-axis mount HSK 63 B-axis spindle speed 12000 rpm B-axis power 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant device: Yes Internal coolant supply: Yes Options: · Full cabin · NC swivel head as B-axis · Coolant device and chip conveyor · Documentation · Geometrically within the new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer's tolerance for new machines - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) renewed - sliding plates overhauled - hoses and cables overhauled, drag chains revised - cabin doors repainted, viewing windows renewed - maintenance carried out according to manufacturer's specifications

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,581 h, functionality: fully functional, machine/vehicle number: 9108 000 046S, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, Machining Center with B & C Axis! TECHNICAL DETAILS X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 / +100° C-axis: +/- 360° Work Table Clamping Area: Ø630 x 500 mm Max. Table Load: 200 kg Spindle Speeds: 10,000 rpm Tool Holder DIN 69893: HSK-A63 Tool Magazine Positions: 16 MACHINE DETAILS Control: SIN 840 D Total Power Requirement: 38 kVA Dimensions & Weight Dimensions: 5 x 5.5 x 2.5 m Machine Weight approx.: 4,500 kg Gkodpfxexf A S De Afiec Operating Hours Spindle Hours: 16,581 h Power-On Hours: 28,521 h EQUIPMENT Renishaw NC4 Tool Measuring Renishaw probe preparation Electronic Handwheel Spindle Oil Cooling System Coolant Recirculation with Ruma Centrifuge Kraft & Bauer fire extinguishing system (incl. extinguishing agent bottle) Elbaron Air Purification System 4 machine feet

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,490 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 123, TECHNICAL DETAILS Control: CELOS control with Siemens 840D sl Operate X travel: 650 mm Y travel: 950 mm Z travel: 700 mm Spindle Speed: up to 15,000 rpm Interface: HSK-A63 Power: 21 kW (40% duty cycle), 16 kW (100% duty cycle) Torque: 111 Nm (40% duty cycle), 85 Nm (100% duty cycle) Tool clamping force: 25 kN Worktable NC swivel table, max. permissible load: 600 kg Workpiece dimensions Max. interfering contour diameter: 630 mm Height: 700 mm Tool magazine Type: Wheel magazine Gkodpjxamm Iefx Afijc Capacity: 123 spaces Permissible tool weight: 15 kg Permissible total weight per wheel: 300 kg Cooling system Coolant tank: 1,300 L Drive motor A-axis and B/C-axis liquid-cooled B/C-axis gearbox liquid-cooled Measuring systems Renishaw infrared probe, tool breakage monitoring Tool measurement in working area Blum laser, tool length and diameter measurement Linear axis measuring systems direct, absolute, resolution 0.00001 mm (10 nm) Feed rates Max. feed rate X-Y-Z: 60,000 mm/min Rapid traverse X-Y-Z: 60 m/min Accuracy Machine accuracy X-Y-Z: A

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 8000 kg Gedpfxexnd Ryj Afijkc Main Drive Spindle speed range 20000 Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 520 mm Z-Axis Movement 475 mm B-Axis Movement -35° / +110° C-Axis Movement 360° Table Table load 300 kg This 5-axis DMG MORI DMU 50 was manufactured in 2017. It features a Ø 650 mm table, X/Y/Z travels of 650/520/475 mm, B-axis rotation from -35° to +110°, and a C-axis full 360° rotation. It supports a spindle speed up to 20,000 rpm, a HSK-A63 taper, and a tool capacity of up to 60. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2015, DMG MORI UNIVERSAL MACHINE CENTER DMU70 – Full 5 axis VMC Year 2015 Control : Siemens 840D SL Travel : X 700 Y 600 Z 520mm Swivel Rotary Table for Simultaneous Machining Table Ø800 x 620mm Spindle 18,000rpm ATC 30 – HSK-A63 Direct Measuring System – All Axis Gksdpfx Afexgpvxjijc Touch Probe Heidenhain TS649 Laser Tool Measurement 3D quick Set Signal Light Electronic Hand-wheel

Condition: used, Year of construction: 2017, Machine Description for 2017 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Co. Ltd. Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01 Year of Manufacture: 2016 Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch Technical Data: • Working Area / Travel: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Max. workpiece diameter: 800 mm - Max. workpiece height: 1,000 mm - Distance spindle center to pallet surface: 80 – 810 mm - Distance pallet center to spindle reference plane: 70 – 950 mm - Pallet load: 500 kg [optional 700 kg] - Number of pallets: 2 - Minimum table indexing angle: 1° [optional 0.001° rotary table] • Performance / Spindle Speed / Drive Power: - Spindle type: speedMASTER® motor spindle - Spindle speed range: 35 – 15,000 rpm - Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous) - Torque: 207 / 95.5 Nm (10% / 100% duty cycle) - Tool taper: BT40 / #40 - Tool magazine capacity: 40 tools [optional: 60 / 120 / 180 / 240] - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Tool change time (chip-to-chip): 2.5 s - Rapid traverse X/Y/Z: 60 m/min - Feedrate range: 0 – 60,000 mm/min - Acceleration: 1 G • Weight / Dimensions / Electrical Connection: - Machine weight (incl. coolant tank): approx. 12,000 kg - Installation footprint (W × L): 3,078 × 4,784 mm - Overall height: 2,852 mm - Coolant tank capacity: 800 L - Power supply: 37.3 kVA - Compressed air: 0.5 MPa / 420 L/min Equipment / Accessories: - NC rotary table with 0.001° indexing (DDM optional) - Automatic 2-pallet changer (rotary APC) - Two pallets with threaded holes and hydraulic fixture interface - Chip conveyor (rear discharge) - Direct measuring systems on X/Y/Z axes - Renishaw OMP60 spindle probe system - Tool breakage monitoring in the magazine - High-pressure coolant interface (70 bar, Knoll) Gsdpfexnkgnsx Afiokc - Coolant/air switching device for through-spindle supply - Rotating inspection window - Coolant gun - Oil mist separator interface Ø200 mm (LTA AC3002 optional) - Automatic loading station door - Signal tower (red/yellow/green/blue) - Portable manual pulse generator (handwheel) - Air filter unit for clean compressed air supply - 45 kVA transformer - Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min) - Three hydraulic clamping towers with double-jaw chucks - CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration) - MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display - SmartKey® operator access management This technical description follows industry standards for horizontal machining center listings, ensuring clarity for prospective buyers on leading platforms such as Machineseeker.

Condition: excellent (used), Year of construction: 2004, operating hours: 100,000 h, functionality: fully functional, Photos & videos of the machine? Request them via MONTRASIO WhatsApp Business. Manufacturer: Deckel Maho Model: DMU 70 eVolution Year of manufacture: 2003 Serial number: 1XXXX (available on request) Operating hours (as of 08/2025): Power-on hours: 100,115 h Cycle hours: 48,302 h Delivery time: End of January 2026 Equipment / Accessories: - Control: Heidenhain MillPlus (V530 / 00m) - Probe: Renishaw MP10 (infrared) - Motor spindle: SK40, 18,000 rpm, mode 4 - Quick Set software (kinematic measurement) - Blum laser system for tool measurement & breakage control - Tool magazine: 92 stations - Tebaron extraction unit - Internal coolant supply through spindle center, 80 bar - Chip conveyor Photos & videos of the machine? Request them via MONTRASIO WhatsApp Business. Maintenance & repairs (overview): - Annual maintenance performed by Ulrich Machine & Industrial Service - Various repairs of individual components throughout the entire service life due to wear - 2022: Motor spindle overhauled, linear guides replaced on Y and Z axes (investment over €50,000) - 2024: New monitor installed Known defects: Only age-appropriate signs of use Reason for sale: Acquisition of a new machining center Gkedpfexndrksx Afijc Photos & videos of the machine? Request them via MONTRASIO WhatsApp Business.

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Gksdpfx Afow Rrcqoisc Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 375 mm, bar diameter (max.): 52 mm, controller manufacturer: DMG MORI, controller model: COMPACT LINE, number of slots in tool magazine: 12, CNC Lathe TECHNICAL DATA & EQUIPMENT: Godexm U Efspfx Afiskc Frequency: 50 Hz Swing over bed: 620 mm diameter Swing over cross slide: 465 mm Number of spindle speed stages: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Shank height for square tools: 20 mm diameter Shank diameter for boring bars: 32 mm diameter Rapid traverse in X-axis: 30,000 mm/min Rapid traverse in Z-axis: 30,000 mm/min Including coolant system and chip conveyor PICK-UP NOTES: Collection must be arranged firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Year of construction: 2004, operating hours: 33,702 h, condition: ready for operation (used), Main Drive Spindle speed range 6000 Spindle bore 73 mm Number of axis 2 Movement X-Axis Movement 213 mm Z-Axis Movement 450 mm Tools Type of tool holder VDI 30 This DMG Gildemeister CTX 310 was manufactured in 2004. A robust horizontal turning machine featuring a max workpiece diameter of 246mm, length up to 445mm, and a spindle speed of 6000 rpm. Includes a 12-position turret and 20 VDI 30 tool holders. Ideal for precise turning operations. Contact us for more information about this machine. Application Types Gjdpfoxnd Tnjx Afiskc Turning

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Taper : BT40 Godpfx Afsxgk Nmjiokc ATC 30

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Gsdpfx Afjxnkdmoiokc Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Key Features: • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Additional Information: Gkodpfx Afexm Smtjioc • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity.

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm z-travel 560 mm Control 3D HEIDENHAIN TNC 640 table-size 800x650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 Spindle hours 11.412 h total power requirement 49 kW weight of the machine ca. 11.600 kg -Tool charger Gsdpfx Aevw Dwvjfiskc -No. Positions in the tool charger 60 -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 16015791684, travel distance X-axis: 350 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 60,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 60,000 mm, torque: 41 Nm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D SL, total height: 3,300 mm, total length: 2,900 mm, total width: 2,400 mm, table width: 400 mm, table length: 730 mm, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 3,179 h, spindle torque (max.): 58 Nm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 35 A Tool holder: BT 30 Tool clamping force: 3.5 +/-1.2 kN Feeds: infinitely programmable Travel measuring system resolution X-, Y-, and Z-axis: 0.01 µ Positioning uncertainty: 8 µ Table with 2 T-slots as well as a GRESSEL brand clamping rail Jaw width: 90 mm Additionally, a 25-position tool changer including the tool holders shown in the photo and a touch probe Also included: a 4th axis (rotary table) from manufacturer LEHMANN and a robot cell from DMG MORI Type: WH 3 Year of manufacture: 2022 NOTES ON COLLECTION: Gkjdoxm Tnrepfx Afiec Pick-up must be firmly scheduled between December 10 and 12 FCA Winterlingen, loaded onto truck

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Max tool diameter 80 mm Number of station 20 Max tool length 300 mm Type of tool holder SK40 Gkodexnd I Sspfx Afisc This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2021, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: SIEMENS, controller model: 840 D CELOS, total height: 2,852 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38 W, space requirement length: 4,784 mm, space requirement width: 3,078 mm, CONTROLS .. CNC controls SIEMENS 840 D CELOS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 730 mm .. Y-axis travel: 730 mm .. Z-axis travel: 880 mm .. rotating range B-axis from: 0 ° .. rotating range B-axis up to: 90 ° TABLE Godoxm Rvmopfx Afiekc .. table surface (left-right): 500 mm .. table surface (front-back): 500 mm .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (max): 15000 /min .. tool fixture: ISO BT 40 .. drive power: 37.7 kW AXIS DRIVES .. traverse velocity X (max): 5000 mm/min .. traverse velocity Y (max): 5000 mm/min .. traverse velocity Z (max): 5000 mm/min .. rapid traverse X: 60000 mm/min .. rapid traverse Y: 60000 mm/min .. rapid traverse Z: 60000 mm/min TOOL MAGAZINE .. magazin type: disc magazine .. number of positions: 40 .. tool diameter max.: 70 mm .. - with free neighbour positions: 170 mm .. tool length max.: 550 mm .. tool weight max.: 12 kg .. tool changing time: 2.5 s AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 2 .. Workpiece diameter max.: 800 mm .. workpiece height (max): 1000 mm .. pallet length: 500 mm .. pallet width: 500 mm .. number of pallets: 2 ELECTRICAL SPECIFICATIONS .. mains power supply: 37.3 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4784 mm .. space requirements -front/back-: 3078 mm .. total height: 2852 mm .. total weight approx.: 12000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes .. European CE standards: yes Accessories - Chip conveyor

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Gkedpfx Afjxm Slveisc Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5200 kg Gkjdpfx Afexnd Ncsisc Main Drive Number of axis 4 This 4-axis DMG Gildemeister CTV 160 was manufactured in 2011. It features a spindle speed of 6,000 RPM and a weight of 5,200 kg. With a circulation diameter of 200 mm, transverse/transfer stroke X of 620 mm, and longitudinal stroke Z of 300 mm, consider the opportunity to buy this DMG Gildemeister CTV 160 vertical turning machine. Contact us for more information. Application Types Turning