Universal machining center

DMG MORI DMU 60 eVo

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: Rcjdpfx Asxgnz Tohcof - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Rcodpfx Ahszt Nywocef Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Rjdpfoy D Hvajx Ahcscf Taper Size SK 40

Condition: excellent (used), Year of construction: 2015, operating hours: 50,976 h, functionality: fully functional, nominal power (apparent): 57 kVA, overall weight: 9,850 kg, spindle speed (max.): 18,000 rpm, input voltage: 400 V, For Sale: DMG MORI DMU 60 eVo CNC 5-Axis Universal Machining Center — 2015 German-made DMG MORI DMU 60 eVo CNC 5-axis universal machining center, suitable for high-precision and complex milling operations. The machine offers excellent rigidity, precision, and productivity for mold manufacturing, precision engineering, automotive, aerospace, and general machining applications. Main Specifications: Manufacturer: DMG MORI / DECKEL MAHO Seebach GmbH Model: DMU 60 eVo Rjdpfjy Rd Rnex Ahcscf Year: 2015 Origin: Germany Spindle Speed: 18,000 rpm Weight: 9,850 kg Power: 57 kVA Voltage: 400 V / 50 Hz CE Certified Available for inspection. Photos, videos, and further technical details can be shared upon request.

Condition: good (used), Year of construction: 2008, Universal machining center Machine type: DMG DMU 60 monoblock Control: Heidenhain iTNC 530 Year: 2008 Available after: sofort / now SPECIFICATIONS Rjdpfx Asziy Iqehcecf Travel X-Axis: 730 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis: 0,001° Amount of controlled axes: 5 Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table: Ø 600 Table size: 1.000 x 600 mm Max. Table Load: 500 kg Equipment Chip conveyor Internal cooling: bar paper band filter Caliper: Heidenhain TS 649 Roto Clear Tool measurement Chip rinsing pistol Oil mist separator Working mode: 4

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light Rcedpfx Aheyrr Rwjcjf • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Rsdpjn Awd Rofx Ahcocf Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Rjdpoin Dkljfx Ahcjcf Touch screen . plant in very good condition .

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard Rcedpjyt Hwzjfx Ahcef • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center Rcodpeytcf Uefx Ahcsf CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *