Used Dmg Ecomill 70 for sale (402)

Condition: good (used), Technical Data – DECKEL MAHO DMU 70 eVo linear Manufacturer / Model: DECKEL MAHO (DMG MORI) DMU 70 eVo linear Control Unit: Heidenhain iTNC 530 Machine Concept: 5-axis universal machining center (simultaneous 5-axis machining possible) Axes / Travels: X / Y / Z: n/a (to be confirmed) A / B (swivel/rotary table): n/a (to be confirmed) Rapid traverses: n/a (to be confirmed) Table / Working Area: Table size: 700 × 500 mm Table load capacity: n/a (to be confirmed) Max. workpiece dimensions: n/a (to be confirmed) Max. workpiece weight: n/a (to be confirmed) Bjdpeyf Un Eefx Aafjlc Spindle: Main spindle: motor spindle Spindle speed: 18,000 rpm Power / torque: n/a (to be confirmed) Tool interface: HSK 63 Tool Changer / Magazine (ATC): Magazine capacity: 60 positions / 60 tools Change system: automatic Max. tool length / weight: n/a (to be confirmed) Measuring Technology: Tool measurement: laser tool measuring system (BLUM) Workpiece probe / probing system: BLUM touch probe (workpiece probe) Spindle / tool breakage control: n/a (to be confirmed) Coolant / Chip Management: Chip conveyor: available Chip management: swarf management system available Internal coolant supply / coolant system: available Tank volume / filtration: n/a (to be confirmed) Equipment / Options (as far as known): Front screen: replaced once Documentation: Service history / reports available Year of Manufacture / History / Condition: Year of manufacture: 2008 Installation / commissioning: 2009 Condition (current impression): Machine is dirty, cleaning recommended Optical condition: front screen already replaced Service / Maintenance: DMG service history available (digital from approx. 2020) Machine has been serviced regularly (according to available service reports / information) Very good spindle maintenance according to service documentation Geometry Data: Spindle alignment in X over a length of 400 mm is 0.008 mm (see Image01-Image02) Spindle alignment in Y over a length of 400 mm is 0.009 mm (see Image03-Image04) Flatness of X-guide over table length is 0.014 mm (see Image05-Image06) Flatness of Y-guide over table length is 0.002 mm (see Image07-Image08) Spindle runout at Z-400 mm is 0.008 mm (see video) In addition, the machine is Quickset-ready.

Condition: ready for operation (used), Year of construction: 2003, Make: DMG / DECKEL MAHO Type of machine: DMC 70 eVolution Year of manufacture: 2003 Control system: MillPlus Tool holder: SK40 Bodpfxjydfbms Aafjlc x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm Speed range: 12.000 U/min max. Table load: 800 kg Table dimensions: 900 × 550 mm

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Milling Bodpfox D H Hijx Aafjlc

Condition: good (used), Year of construction: 2010, operating hours: 54,500 h, functionality: fully functional, machine/vehicle number: 15435720734, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain 530, controller model: 530, spindle speed (max.): 14,000 rpm, operating hours of spindle: 12,000 h, Equipment: chip conveyor, Machine will be available from 03.2026 Equipment DMU 70: with Erova 10-position changer Spindle 14,000 rpm Heidenhain 530 3D probe Heidenhain TS649 DMG 30 tools / SK 40 Simultaneous rotary table Purge air Chip conveyor Handwheel Bljdpfxoyab Ris Aafjc Folding roof The long 0-point clamping system can be taken over for an additional charge.

Condition: excellent (used), Year of construction: 2016, DMG Mori Ecomill 600 V Year of manufacture: 2016 X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 210 mm Control: Siemens 840D SolutionLine Spindle taper: SK 40 Spindle speed: 12,000 rpm Through-spindle coolant (IKZ) Chip conveyor Table size X: 900 mm Table size Y: 560 mm Max. workpiece weight: 400 kg Bsdpfxox Tn R Dj Aafslc Tool changer: 30 positions Feed rate: 30,000 mm/min

Condition: used, Year of construction: 2015, x-travel 635 mm Bedowm Rtbopfx Aafolc y-travel 510 mm z-travel 460 mm Control DMG

Condition: ready for operation (used), Year of construction: 2008, Main Drive Number of axis 5 This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Blsdpfx Aox D Hpwsafec Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, General Data Machine weight 5450 kg Control Unit Brand SIEMENS Model 840 Dsl - ShopMill Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 800 mm Blodpfxsx D H Dhe Aafjc X-Axis Rapid Traverse 30 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 800 kg Tools Number of station 30 This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2016, Table size 1100 x 560mm, Traverses X Y Z 800 x 560 x 510mm, Spindle speed 12,000rpm, spindle taper BT40, 30 station ATC, FANUC control, Table load 800Kg, Through spindle coolant, Swarf conveyor. Bjdpjxddk Eofx Aafolc

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 600 mm Travel distance Y :560 mm Travel distance Z: 210 mm HSC-machines Number of axis: 3 milling machine / machining center Bledsvtfp Ejpfx Aafoc Control: Siemens 840D_sl spindle chuck: SK 40 spindle revolutions: 12000 rpm table size X: 900 mm table size Y: 560 mm max. workpiece weight: 400 kg tool changer: 30 - time feed rate: 30000 mm/min

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: Siemens, controller model: 840, Milling machine DMU 70 Evolution Bodpfx Aotxx Dqoafelc ° Year of manufacture: 2009 • Axes: 5-axis simultaneous • Tool holder: HSK 63A • Tool positions: 2 x 16 magazine positions • Control: Siemens 840D powerline • Max. speed: 18000 • Travel paths: ° X-axis 750 mm ° Y-axis 600 mm ° Z-axis 520 mm • IKZ – internal coolant supply – 40 bar • Coolant tank: 980l

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Blsdpfx Aaoyf H E Nefsc Gantry loading system LG-10AI

Condition: good (used), Year of construction: 2002, Travel X/Y/Z: 2350 (2x710)/520/520 mm Bledpfoyg Dz Rsx Aafjc Max spindle speed: 18,000 rpm Tool holder: HSK A 63 Tool changer positions: 2 x 32 Control: Heidenhain

Condition: excellent (used), Year of construction: 2019, DMG turning center (Y2019) in outstanding condition with only 2800 spindle hours! Including: Subspindle C-axis Y-axis Chip conveyor Iemca Kid 80 bar feeder Optional: set of static and driven tools + jaws Full technical specifications in the attached documents. Bsdpoya I Ibofx Aafjlc Cnc control M730UM CNC with CELOS Turret 12 stations Distance between centers 700 mm X-axis travel 260 mm Y-axis travel ca 50 mm Z-axis travel 795 mm Max. turning diameter ø 366 mm Swing over bed ø 920 mm Swing over cross-slide 740 mm Bar work capacity 80 mm Immediately available for delivery. Please note: WE HAVE A SECOND IDENTICAL NLX 2500/700 SY (2019) AVAILABLE FOR SALE (without barfeeder) AT THE SAME LOCATION AS THIS MACHINE. LET US KNOW IF YOU ARE CONSIDERING BUYING 2 MACHINES. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2006, DMG DMC 70H Duoblock + RS4 CNC Machining Centre (2006) Manufacturer: DMG Model: DMC 70H Duoblock + RS4 CNC Machining Centre Year of manufacture: 2006 Condition: Used, powered on and ready for demonstration Power-on hours: 92,800 h Spindle hours: 70,200 h Spindle speed: 18,000 rpm Spindle mount: SK40 Tool magazine: 180 positions Internal coolant supply (IKZ): 40/80 bar Belt filter system RS4 pallet station including 4 pallets. Further information to follow. Bledsx S N E Hopfx Aafec

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,500 h, number of axes: 3, This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Additional equipment • KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle • Coolant system with increased pressure (5 bar) • Hinged belt conveyor, right-hand discharge • Integrated parts catcher for the main spindle • Interface for bar feed, LNS • Double foot switch with protective cover • Signal light (red, yellow, green) • Tool overhang length 100 mm for driven Y-axis travel + Tool holder package • Transformer 45000 VA • 15 bar pump with filter Extra Information Bljdpfox D D Uwex Aafec The machine has only approximately 6,500 operating hours and is in top condition Included in the price of the machine: 12 driven toolholders, including quick-change systems, and 17 static toolholders. Value new: over €30,000

Condition: like new (used), Year of construction: 2023, operating hours: 3,751 h, functionality: fully functional, turning length: 700 mm, turning diameter: 356 mm, spindle speed (min.): 6,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, DMG MORI NLX2500/700 universal lathe with Y-axis, bar feeder, and driven tools. Main and sub spindle. Spindle bore diameter: 81 mm. INCLUDING tool package (purchase price €64,000 / see attachment). Bjdpfx Aasx Sp Izsfolc

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 Bodpfx Asvw Ackoafelc - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m Bsdpfx Aeu Idbysafelc space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Bedpfx Ajv T Rtioafjlc Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Bjdpexzqhrjfx Aafolc Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Machine available immediately! Machine has been fully cleaned and inspected! We will undertake loading of the machine! Transport can be organized upon request!

Condition: good (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, Used 3-axis machining centre DMG MORI Milltap 700 Bljdsx N Dcuopfx Aafoc Year of manufacture: 2012 Control: Siemens Travel paths: X 700 mm, Y 420 mm, Z 380 mm Spindle speed: 10,000 rpm Tool holder: DIN30 Renishaw 15-position tool changer Dimensions and Weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg The machine can be inspected by appointment in Burbach. Loading can be arranged. Technical data, accessories, and machine description are non-binding.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 38,452 h, Control Unit Brand SIEMENS Model 840D Bljdpsx D Nkkefx Aafsc Main Drive Spindle speed range 24000 rpm This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] Bljdpfx Aaox H Atysfec - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 Bljdpfx Aasxzk Ifsfsc spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - only 1.237h Spindle hours