Machining Center - Universal

DMG DMC 60 H

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Gjdpfx Afeyi Ekfe Ujbi Extra Information Documentation and Electrical circuit diagram (German) available

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe Godsx Icyvepfx Af Ujbi -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 8,000 rpm, Equipment: rotational speed infinitely variable, Machining center with large tool magazine and ICS (internal coolant supply)! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Feed and Rapid Traverse Feed rate X/Y/Z axis: 1 – 60,000 mm/min Rapid traverse X/Y/Z: 60 m/min Feed force X/Z: 9,600 N Feed force Y: 8,000 N B-axis feed: 9,250 °/min Godpfx Aewynxzsf Ujbi B-axis: 360 × 0.001° Spindle Spindle speeds - stepless: 8,000 rpm Drive power 40% duty cycle: 20 kW Drive power 100% duty cycle: 13 kW Torque at 40% / 100% duty cycle: 191 / 124 Nm Tool interface: SK40 Pallets and Workpiece Pallet size: 2 × 400 × 500 mm Max. workpiece weight: 600 kg Tool Magazine Tool magazine: 180 stations Tool diameter: 90 mm Tool diameter with 2 empty adjacent positions: 160 mm Max. tool length: 350 mm Max. tool weight: 3.50 / 12.00 kg Control CNC control: SIN840D MACHINE DETAILS Electrical Data Total power consumption: 65 kW Weight and Dimensions Machine weight: approx. 16.00 t Space required: approx. 9.00 × 4.50 × 3.50 m Operating hours: 38,826 h EQUIPMENT Coolant system with ICS Dual chain magazine with 180 stations Chip conveyor BLUM tool laser measurement Electronic handwheel