Used Die-Cast for sale (6,141)

Year of construction: 2020, condition: like new (used), Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet Permanent overbelt magnetic separator TYPE PEM1800 1800x1000x400mm ===== 4x ring screw for suspension Magnet dimensions: 800x500x180mm PU conveyor belt with hard cover, matt black Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-65 Three-phase gear motor GEMOTEG 1.1KW Itjdpfehun Uuox Ah Nob Cladding: RAL 5015 Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: used, Year of construction: 2006, ASAI 200T Die Spotting Press DSP1800M, Year 2006, Table: 1800×1200 mm, 180-degree forward flipping type. Ijdsyammvopfx Ah Netb

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Press capacity: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y-axis rapid traverse: 200 mm/s Y-axis working speed: 1-10 mm/s Ijdpfxoya Iaqe Ah Nstb Y-axis return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable stop fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electrical foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot - TRUMPF tool system, without tooling Dimensions L x W x H: 0 x 2500 x 3400 mm Machine height: 3350 mm (max. height 3400 mm) Weight: 17,000 kg In good condition

Condition: used, Year of construction: 2011, machine/vehicle number: 26260117, fuel type: diesel, Empty weight: 3.400 kg Lifting capacity: 200 kg Working height: 2.600 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Itjdpfxjtr Ny De Ah Neb Tyre brand: - Max. horizontal reach: 1350 m Transport dimensions (LxWxH): 6.68x2.1x2.95 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 819 h, machine/vehicle number: 2090426, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.650 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Iedpfx Astr H H Teh Notb Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.3 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 570 h, machine/vehicle number: 2107039, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.650 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Max. horizontal reach: 830 m Itsdpfx Ahstr Inze Neb Transport dimensions (LxWxH): 6.75x2.3x2.3 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 16 h, machine/vehicle number: 2109053, axle configuration: 4x4, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.200 kg Mast: articulated arm Lifting capacity: 230 kg Iodpotr Im Djfx Ah Nstb Working height: 1.600 cm Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.27 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 585 h, machine/vehicle number: 2109401, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.200 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Max. horizontal reach: 830 m Transport dimensions (LxWxH): 6.75x2.3x2.27 Please contact PFEIFER GROUP for more information Itodpfstr Imrox Ah Nsb

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Isdpjxyyrqsfx Ah Notb

Condition: used, Year of construction: 1979, pressure 18 t diameter 250 mm stroke 150 mm distance between columns 210 mm max. distance table - ram 400 mm Itedpjvzxp Isfx Ah Neb power capacity 5,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 1,8 m hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Isdpfx Ajhmmfkoh Netb Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h Isdsxpqy Depfx Ah Njtb - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length Itodpfxew Iq Uge Ah Njb - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Automatic Platen Die Cutter ETERNA ML 930 GII with 3 Operation modes Halbautomatischer Stanztiegel / Automatic Platen Die Cutter ETERNA ML 930 GII Year 2008 - Serial-No. EP51568 Ijdpfxsx U Adne Ah Nstb Format 670 x 930mm Operating modes: Single, Continuous nd with time delay on opening Electromagnetic clutch and brake Included frame and tools, in very good condition Safty Cover Weight 3800kgs - Power supply 380 V Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1997, Die cutting press, make Drössert Size: 100x140 Itodpfx Aoya Hf Soh Nsb Year of manufacture: 1997

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm MACHINE DETAILS Iodeya Efwepfx Ah Notb Control: Charmilles Weight: 3,500 kg

Condition: used, Year of construction: 2021, functionality: fully functional, Bespoke Hot Table, we built to cast hot polyurethane components, we were holding tool temps at 110 degrees to cast the parts. So perfect for molding casting or curing. Also with close down sides to protect the bed when not in use. Heat Transfer Oil S2 machined Aluminum table with oil ways for circulation we found to be much more efficient than electric. Using a Tool Temp TT-181 reconfigured for oil usage - directly by Tool Temp temperature 0-150 degrees ( we have never tried higher) Circulation cut off valve for flow and return Heat Pipes changed before decommissioning Spare pump connectors provided Being sold as the department has closed and the machine is no longer required. Itodsxpxmxspfx Ah Nob Sizes Heated Bed 600mm wide x 1800mm long x 60mm thick Bed Height 930mm Table sizes 660mm Width 1860mm total length Closed Height 970mm Full working condition - Ex works Aylesbury Buckinghamshire England, we can export at a additional cost. Can be seen working

Condition: used, Year of construction: 2000, functionality: fully functional, Kerma TS 3E Die Cutting Press, completely overhauled in 2000. Die cutting area 850x1250 mm / Clamping frame size 800x1200 mm. Quick-clamping frame. Safety infeed and outfeed tables. Max. pressing force: 240 t. Dimensions: 2500 x 2000 x 1650 mm. Power: 7.5 kW. Itsdpox Anvpefx Ah Nsb

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm Ijdpfx Aoyaq S Ash Njtb

Condition: used, mileage: 241,000 km, power: 265 kW (360.30 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 8,560 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, traction control, General information Year of manufacture: 2021 Axle configuration Suspension: air suspension Front axle: Steering; Tyre profile left: 90%; Tyre profile right: 90% Rear axle 1: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Rear axle 2: Steering; Tyre profile left: 90%; Tyre profile right: 90% Weights Empty weight: 12.091 kg Carrying capacity: 13.909 kg GVW: 26.000 kg Functional Cooling engine: diesel and electric Other information Iedpfx Aeyaqaaeh Njtb Cool unit make: Carrier Cool unit brand: Carrier

Condition: excellent (used), Thread cutting head self-opening Make Akon Type Rubometic Type D cutting capacity M6 - M 20 Itsdpjg Sif Usfx Ah Nsb shank diameter 40 mm

Condition: ready for operation (used), functionality: fully functional, Machinery for the production of structural packaging. Includes a die-cutter H-142, year 1986, size 900x1400 mm + box maker, manufacturer Pack Projekt, year unknown – purchased in 2009 – feed width 1450 mm – additional creasing bar for vertical creases – slitting blade 350 mm + gluing machine for self-adhesive tapes including silicone tape dispenser and tear-open thread – feed width 1400 mm – year 2010 – hot melt glue system. All machines are used. Ready for operation and functional. SEE PICTURES AND DOCUMENTS Iodpfoyan I Iox Ah Njtb

Condition: excellent (used), Year of construction: 2000, Cast resin, epoxy resin dry distribution 3 phase transformer manufactured by ALSTOM France - line Harmony, 1600kVA, 21000 ( ± 2 x 2,5 %) = ( 22000-21500-21000-20500-20000 ) / 400V; Dyn11 ( or 5 or 1 ), IP00, year of production 2000, losses IEC, PTC probes, suitable for 20kV, 21kV and 22kV medium voltage grid. Total 1 pc available, functional, very good shape ( very little used as a step up for emergency dieselgenerator ). Isdpfx Asq Evfgoh Netb

Condition: used, various tool changing consoles / die loading arms available: 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) Itjdpfxexddqfo Ah Nob 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x) 070023 Dimeco T.C.F. ,5 t / 500 mm) (2x)

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Itodpfew Sfptex Ah Nsb