Used Crimp Elumatec for sale (122)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm MACHINE DETAILS Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Dlodpfx Abjxx Uf No Toa Floppy disk drive DOS operating system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm Dsdsxy Hcijpfx Ab Tola MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, cutting length (max.): 6,000 mm, - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm Djdpfjx Aqhzox Ab Tsla - E255 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation

Year of construction: 2003, condition: used, Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Dsdpox Ecgnsfx Ab Tela Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Minimum quantity spray device label printers

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) Dlodpfx Aox D S N Njb Tea This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: used, Year of construction: 1996, 1 pc. double mitre saw ELUMATEC DG 104/00S as per photos and inspection, with control unit Year of manufacture: 1996 Dimensions (L/W/H): 450x190x50 cm Condition: used Payment method: advance payment via bank transfer Storage location: production hall Shipping: Collection only – no shipping available for this item! Dsdpfx Asx A A Aqob Tela

Year of construction: 1991, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Technical data: • Manufacturer: elumatec Dodpfxjw Tcrhs Ab Tela • Model: ST 225 • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1991

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 07900350045, saw blade diameter: 380 mm, total width: 4,500 mm, Double mitre saw Elumatec DG 79, purchased new in Nov. 2006, used, fully functional, pictures attached, purchase invoice with electronic and machine data included. Djdpex D Tmpsfx Ab Tela

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 1400040588, Elumatec SBZ 140 - X: 7900 - Y: 850 - Z: 650 mm metal milling machine 4 axes industrial profile machining center Dsdpfx Asx Akgkob Tjla

Year of construction: 2006, condition: used, Control E 550 Max. X-axis travel: 2,500 mm Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Speed infinitely variable up to 21,000 rpm. Manual control unit Minimum quantity spraying Manual tool change 5 pneumatic material clamps light barriers Dledpox Ecfkefx Ab Tja

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Additional functionalities with extraction unit and roller conveyor for improved operation Extraction unit DG 104 cpl Djdpfjx D Ix Hox Ab Tsla Roller conveyor 3m Profile lifting bars This Elumatec DG104 sawing machine was manufactured in 2006. It features a double mitre saw with a 420mm diameter and an E 555/3 for 22.5º inside cuts. Additionally, it includes an extraction unit DG 104 cpl, a 3m roller conveyor, and profile lifting bars. A great opportunity to buy this Elumatec DG104 sawing machine. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Equipment: rotational speed infinitely variable, All machining operations such as milling, drilling, and thread cutting are performed on the stationary profile, thereby protecting the profile surface. Djdpfjx Dzftox Ab Tola Improved work results through the use of intelligent control technology. Rapid positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives. Thread cutting without compensation chuck. Automatic clamp detection and positioning. Automatic tool magazine with four tool compartments (without tools). Angle head without tools. Modern 3-axis control. Ergonomic operation thanks to the use of a modern inclined bed. No need for axis referencing due to systems based on absolute encoders. Collision avoidance through automatic clamp detection and positioning. The Power Torque milling motor with closed-loop speed control ensures short spindle start-up and stop times. Certified drive-integrated safety functions. Low power consumption through the use of intelligent control technology. Higher energy efficiency due to recirculative coupling of the axis drives. Uninterruptible power supply (UPS). Windows operating system. 15.6" panel PC, i3 processor, USB and network connections. Simple and convenient program entry with eluCam at the control panel, even during machining. Online remote maintenance.

Year of construction: 1997, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Technical data: Djdpfxew Tcpyj Ab Tola • Manufacturer: elumatec • Model: ST 225 • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1997

Year of construction: 2018, condition: good (used), For machining aluminium and steel profiles Fully functional, in very good condition Dledpfxex Diqwo Ab Tja Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Djdpfxsx A D Iho Ab Tsla 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Year of construction: 1999, condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw unit with hand crank and digital display Dlodpfx Abjxz Enme Toa Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung Machine is dismantled on timber

Year of construction: 2001, condition: used, 2-head cutting machine Elumatec DG 104/2 Blades 420 mm Dljdpex A D A Sefx Ab Tja usefull lenght 6000 mm Control E 550

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling a CNC machine. Price 36000. Dlsdpsw Rnl Isfx Ab Tea We also have a complete line for the production of PVC and aluminum windows and doors

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Dljdpfx Aew Sadrsb Toa

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Dlsdpfx Abexz Sknj Tja Shipping on demand

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available Dlodpfx Aboxz R Ixs Tja 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Condition: good (used), Double Mitre Saw Elumatec DG 740/02 – used, operational, ready for demonstration For sale is an Elumatec double mitre saw DG 740/02 in good, fully functional condition. The machine is immediately ready for use and can be demonstrated on site. Technical Data / Features: Dljdpfoxzdulsx Ab Toa Model: Elumatec DG 740/02 Double mitre saw for precise cutting of aluminium and plastic profiles Robust construction, precise cut guidance Both saw units are pivotable / can perform mitre cuts Cleaned and well-maintained used condition Condition: The machine is in working order and in age-appropriate good condition. All functions can be tested live during viewing. The machine has been removed from production, cleaned, and is ready for demonstration in a warehouse until sold. Viewing & Collection: A non-binding inspection is possible by appointment. Collection by the buyer. Price: Negotiable If you are interested or have any questions, please feel free to contact us!

Year of construction: 2001, condition: used, 2-head cutting machine Elumatec DG 244/2 Blades 550 mm usefull lenght 6000 mm Dodpex A D Alefx Ab Tola

Condition: good (used), functionality: fully functional, machine/vehicle number: 1050126453, Year of construction: 2006, The saw works flawlessly. Dsdpfsxq Tacjx Ab Tsla

Year of construction: 2007, condition: used, functionality: fully functional, Equipment: CE marking, For Sale: Elumatec SBZ 122/10-30 CNC Profile Machining Centre (2007) The Elumatec SBZ 122/10-30 is a reliable and versatile CNC machining centre designed for processing aluminium, PVC, and thin-walled steel profiles. This 2007 model offers precise 3-axis CNC control combined with a rotating angle head, allowing machining on five sides of the profile without repositioning. With its robust construction, proven Elumatec technology, and automatic tool changer, the SBZ 122/10-30 remains a valuable machine for window, door, façade, and general profile machining applications. 🔧 Technical Specifications Year of manufacture: 2007 Axes: 3 CNC-controlled (X, Y, Z) Working range: X-axis: approx. 3,850 mm Y-axis: approx. 350 mm Z-axis: approx. 280 mm Max profile length: Without end machining: approx. 3,750 mm With end machining: approx. 3,650 mm Spindle power: ~6 kW (S6) Dsdpfx Asw Syy Tjb Tjla Spindle speed: up to 21,000 rpm Tool system: HSK-F63 Tool changer: 4 positions + angle head (5 tools total) Accuracy: ±0.1 mm 📐 Dimensions & Weight Machine dimensions (L × W × H): approx. 4,600 × 3,230 × 2,420 mm Weight: approx. 1,690 kg 💻 Control PC-based CNC control (Windows environment) Programming via Elusoft Automatic clamping system for secure and flexible profile positioning ✅ Highlights: Five-sided machining without manual repositioning Automatic tool change for increased efficiency Suitable for aluminium, PVC, and light steel applications Trusted Elumatec design with long-lasting performance