Used Elumatec Aks 134 for sale (120)

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Nsdpfx Afoyybr Ujaola Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Nlsdpfxoyfhvpe Afaoa Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Nledpfxoxyupko Afaja Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Nledex A D Ihopfx Afaoa 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Nledpfxoy Egaho Afaja Control: E555 touchscreen Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg

Condition: ready for operation (used), Year of construction: 1982, An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Nledpfx Aoy Hk Thofaoa

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20404, elumatec AF 222 For machining transoms and door profiles made of aluminium or plastic Manual feed of the routing unit Large cutting range of up to 400 mm Continuously adjustable table height The material stop can be pivoted up to 60° to the left and right. Notching up to 30° (acute angles, left and right). Detent at 90° with index pin. With quick tool change system and "Spindle Lock" for easy tool changing Precise, smooth-action and low-wear recirculating ball guides Horizontal and vertical pneumatic material clamping provides flexibility Depth stop for four different notching depths Pulsed coolant system Cutting tool diameter max. 280 mm Cutter bore 40 mm Profile height max. 165 mm Cutting height 145 mm Cutting depth 110 mm Cutting length 400 mm Spindle speed 2,800 rpm Travel 550 mm 2.5 kW of power at 400 V / 50 Hz Compressed air supply 7 bar Power output 2 kW Air consumption 10 l per working cycle, 20 l with minimum-volume lubrication system Length 1,540 mm, depth 905 mm, height 1,000 mm, weight 248 kg Njdpfx Asy Hcb Djfaela Machine is ready for operation. Tool was sharpened

Year of construction: 2020, operating hours: 1,288 h, condition: excellent (used), functionality: fully functional, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles Standard version equipped with air-cooled milling spindle (optionally available with water-cooled milling spindle) All machining operations, such as milling, drilling, and thread tapping, are performed on a stationary clamped profile. Nlodpfjwxmdtsx Afaea Stepless machining between -90° and +90° with any available tool Automatic clamp adjustment with absolute measurement system The traveling tool magazine ensures short tool change times for optimal machining cycles. The magazine can hold up to eight tools. For double profile and end machining, a maximum of two swiveling angle milling heads are available, each with two different tools (0°–90°–180°–270°) (optional) Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system with eluCam SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Year of construction: 2008, condition: like new (used), functionality: fully functional, Elumatec SLK 118 3-axis CNC profile machining center. Bar processing center with 3 controlled axes; designed for machining aluminum and thin-walled steel profiles and extrusions, as well as aluminum, PVC, and lightly alloyed steel. Especially suitable for companies processing Neher insect screen profiles or those looking to automate their door production. Machining from above; workpiece rotation for processing the opposite side. Technical Data: Travel range X-axis: 2450 mm / max. speed 36 m/min Travel range Y-axis: 350 mm / max. speed 15 m/min Travel range Z-axis: 280 mm / max. speed 15 m/min Spindle speed: 18,000 rpm. 6.5 HP (4.5 kW) motor-driven spindle Minimum quantity cooling system Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89"). Weight: 1,400 kg (3,087 lbs). Equipment: PC touchscreen control with Windows software, 4 material clamps The machine is in exceptionally good condition. Nlsdpfx Afoyr Ai Djaja

Condition: excellent (used), Shipping within the EU: 350 euros Nledpjl Sklgjfx Afasa

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Nodpfsw A Rv Iox Afaela Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: excellent (used), functionality: fully functional, Length 3,050 mm Width 900 mm Height 2,600 mm Maximum clamping width 2,800 mm Minimum clamping width 390 mm Height of clamping bars 2,300 mm Njdpfx Afjy Aydheajla Width of clamping bars 100 mm Width of lower roller conveyor 120 mm Weight 370 kg Load capacity 200 kg Compressed air connection 7 bar Air consumption 35 l/min

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 1220099286, Maximum machining length: 4,150 mm without end-face machining Maximum machining length: 4,000 mm with end-face machining X-axis travel: 4,295 mm, max. feed rate: 120 m/min Y-axis travel: 910 mm, max. feed rate: 60 m/min Z-axis travel: 475 mm, feed rate: 50 m/min Machining directions: 5 (top, back, front, left, right) Positioning accuracy: +/- 0.1 mm Milling spindle power: 8 kW; S1 with recirculation (air-cooled) Milling spindle speed: max. 24,000 rpm Tool holder: HSK 63 F Tool changer: automatic Tool magazine slots: 2 x 4 slots Automatic tool changer for angle head: 2 slots Disc cutter diameter: 120 mm Tool length (from taper): 150 mm Clamp displacement: automatic Clamps: Basic (with round guide), 6 units Operating system: Windows Production software: EluSoft, EluCAM Nlsdpfxey Eg T Ij Afaea Compressed air connection: 7 bar Electrical connection: 400 V, 3~ph, 50 Hz, 25 A Air consumption per minute: Approx. 185 l with spray Dimensions (L x W x H): 6,592 mm x 2,171 mm x 3,000 mm Weight: 2,900 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04631037, cutting length (max.): 6,000 mm, Elumatec DG 104 Double Mitre Saw (Year 2006) – Precision Aluminium Processing For sale is a used double mitre saw, model Elumatec DG 104, manufactured in 2006. This machine is specifically designed for precision machining of aluminium and plastic profiles, making it ideal for use in window, door, and façade construction. Technical Highlights: - Double-sided tilting saw units for precise mitre cuts Nedpfx Aoyvrq Tefasla - Suitable for double mitre cuts from 45° to 90° - Robust machine construction for low-vibration operation - Pneumatic material clamping for secure workpiece hold - High cutting precision and repeatability - Intuitive operation Features: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying device Condition: The machine is in used, fully functional condition. Normal signs of use are present, but do not affect functionality. Application Area: Ideal for metalworking shops, window manufacturers, and workshops that require precise and efficient mitre cutting. Other: Viewing by appointment possible. Loading can be supported if necessary. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm - Cutting area e.g. up to approx. 180 x 150 mm 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l Nlsdpfey Efl Nex Afasa - Drive: 400 V / 4.0 kW - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display - Pneumatic vice - Automatic shut-off at profile end

Condition: used, Year of construction: 1998, Hinge drilling machine for processing aluminum profiles with pneumatic material clamps and micro-spray device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm. Nsdpey Anhnefx Afasla Weight: about 500 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Nsdpfx Ajy D Sywsfasla

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1240024978, input voltage: 230 V, operating pressure: 7 bar, pressure: 7 bar, We are offering this used elumatec EP 124 corner crimping press, year of manufacture 2011. Nsdpfxey D Nbfe Afaola Model: EP 124 Machine No.: 1240024978 Voltage: 230 V Frequency: 50 Hz Current: 1 A Power: 120 W Operating pressure: 7 bar If you have any questions or need further information, please feel free to send us a message or give us a call.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar Njdpsy D I R Sjfx Afasla If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 2018, condition: used, Manual length adjustment via handwheel with digital display For mounting on any Elumatec single- blade saw (left) Njdpfx Afjyz U T Ioasla Max. feed length: 3,000 mm Pneumatic parking brake

Year of construction: 2018, condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display E111 Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Nodoyz U Sqspfx Afaela Miter cuts possible on both sides 2-Hand-Bedienung Machine is dismantled on timber

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles, 7.3m Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The machine was serviced by Elumatec in March 2026 and has not been used since then. Interested parties are always welcome. We would be happy to demonstrate and let you test the machine at our facility. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel range A-axis: 0-90°, freely programmable - Swivel range C-axis: 0-355°, freely programmable - Max. machining length without end processing: 7300mm - Max. machining length with end processing: 6980mm - Tool changer with 10 positions, plus a saw blade holder - 8 material clamps - Tool holder: HSK63 - Spindle power: 15kW / 22,000 rpm - 2-layer processing - Minimum quantity lubrication - Central lubrication - Saw blade: 400mm The machine is available immediately. Required space, see layout in the attachment. Transport instructions are also included in the attachment. If you have any questions, please contact us. Disassembly, loading, and transport should preferably be organised by the buyer due to reassembly requirements. Various aids can be provided by arrangement, as far as available. All information and dimensions have been described to the best of our knowledge, but we cannot guarantee completeness or accuracy! Nodpfx Ajy Dvq Hsfajla The sale is made as seen, without warranty, return or similar. Subject to prior sale.

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 8340020123, For sale: ELUMATEC EV 834 cleaning machine. The machine is in working condition. Nlodpfx Aey Dfgkofaoa

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Nlodpfxjxqihie Afasa Easy tool change via spindle lock Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Year of construction: 1997, condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via program control Mechanical adjustment for swiveling on both saw units, allowing direct control of angles between 45 and 90 degrees New network-capable control system in 2019 Minimum quantity spray device Weight: approx. 2200 kg Nlsdpfx Afoyzhuxoaja