Used Elumatec Af 223 for sale (108)

Condition: excellent (used), Year of construction: 2020, functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! For milling transom and door profiles made of aluminum and PVC TECHNICAL DETAILS Milling height: max. 150 mm Iedpswaa Sysfx Afijtn Milling depth: max. 110 mm Milling length: max. 400 mm Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Year of construction: 2003, condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. profile height: 150 mm Pneumatic material clamps Manual feed minimum quantity spraying Iedpfjw Tbqisx Afiotn Weight: approx. 200 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Cutter diameter max. 280 mm Cutter bore 40 mm Manual feed Profile height max. 200 mm Milling area: Length 400 mm Depth 110 mm Height up to 150 mm Power 2.5 kW at 400 V/50 Hz Spindle speed 2,800 rpm Compressed air connection 7 bar Isdjwpchvepfx Afijtn Air consumption 10 l per cycle, with minimal quantity lubrication 20 l Length 1,540 mm, Depth 905 mm, Height 1,200 mm, Weight 248 kg

Year of construction: 2011, condition: used, For aluminum and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. profile height: 150 mm Pneumatic material clamps Manual feed minimum quantity spraying Itjdpfxowucd Is Afien Weight: approx. 200 kg

Condition: ready for operation (used), total height: 2,950 mm, total width: 3,350 mm, total length: 11,400 mm, empty load weight: 4,900 kg, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer Implementatie Software nieuwe controle 2025 Versie: 9.1.1.10 / 2.31e automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur Iodoxpgg Hspfx Afiotn microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Bar Machining Centre | elumatec SBZ 130 - 8-position tool changer turret with driven tools - Material support with automatic clamping system - Operator console with touch panel - Separate Rittal control cabinet with cooling unit - Safety enclosure with SICK light curtain system Itsdpfx Aexn Scwefisn Inspection is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: elu | SBZ | Bar Machining Centre

Condition: good (used), Corner Crimping Press Elumatec, Type: EP 124 Serial No.: 1240024560 Pressing height: 140 mm Pressing force: 70 kN (7t) Drive: pneumatic With support arms and pressing knives Itsdpfx Afsxpkf Tsion With accessories, tools Electrical connection: 230 V 50/60 Hz Compressed air connection: 7 bar Air consumption: 35 l per working cycle Dimensions (L x W x H): 1100 x 950 x 1230 mm Weight: 545 kg (Changes and errors in the technical specifications as well as prior sale reserved)

Year of construction: 2006, condition: ready for operation (used), Three smaller machines for window and profile processing purposes are available. 1) Profile gluing machine Ruchser RU-FE, year of manufacture: 2003, film width range: 30mm-250mm, film inner/outer diameter: 75mm/270mm, profile thickness range: 30mm-100mm. 2) Rubber inserting machine Ruchser RU-EV-HS, year of manufacture: 2006, profile width range: 20mm-100mm. 3) 2-head profile milling machine Elumatec KF 78/60, year of manufacture: 1993, vertical milling X/Y/Z: 290mm/100mm/120mm, horizontal milling X/Y/Z: 270mm/70mm/120mm, speed: 6000rpm/12000rpm. An on-site inspection is possible. Itjdpjxn S S Ejfx Afion

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Itedpfxsxnz Ivo Afijn Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Operating pressure: approx. 8 bar EQUIPMENT Automatic tool changer Angle head

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with a new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit Itodpfx Aowwukxjfijn minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material clamps Spindle in very good condition, spindle pull-in force: 12.5 kN Safety fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1222021152, travel distance X-axis: 3,500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, Rational machining of aluminum, plastic and steel profiles 3-axis control - Working length 3500 mm Continuous clamping area allowing for clamping of profiles up to 7 meters long with roller conveyor support. - Simple graphic operator guidance. - Automatic control of clamping position. - Automatic measurement of profile length - 1-circuit clamping system. - Continuous bed surface. - Complete machining of profiles that are in a stationary state prevents damage to the profiles. - Fast positioning of the machining unit (up to 50 m/min.) in the x-axis ensures a robust drive with minimal wear - Highly dynamic servo drives with measuring device and digital servo controller. - Electronic 3-axis industrial PC control, color screen and floppy disk drive for online connection, barcode scanner. Network connection R3 45 10/100 Mbit - Machine number: 1222021152, year of manufacture 2007 Machining length: standard 3500 mm Milling range X-axis: 3500 mm without end face machining Milling range Y-axis: 350 mm Milling range Z-axis: 280 mm Rapid traverse Y-Z: max. 30 m/min. Rapid traverse X-axis: max. 50 m/min. Positioning accuracy: +/- 0.1 mm Milling speed: 1 – 21000 1/min. Itodpfjw Tm Rhsx Afijn Milling power: 6.0 kW S6 Tool changer We can offer professional assembly and operator training

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC profile machining centre | elumatec SBZ 131 - 8-position tool turret with driven tools - Material support with automatic clamping system - Operator panel with touchscreen - Separate Rittal control cabinet with cooling unit - Mesh enclosure, SICK light curtain system Itjdpfx Afjxn Sbmoion An inspection is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: elu | SBZ | profile machining centre

Year of construction: 2009, condition: good (used), Mitre Saw Elumatec, Type: MGS 105, Year: 2009, with stop and measuring system Elumatec Type: AMS 200 Serial No.: 1050126568 Swivel range: Manual, 22.5° left and right, with digital display Tilt range: Pneumatic, from 90° to 45° Saw blade diameter: 420 mm Saw blade speed: 2,800 rpm Power output: 4 kW Electrical connection: 230/400 V, 3Ph, 50 Hz Compressed air connection: 7 bar Air consumption: 20 l without misting, 32 l with misting Dimensions (L x W x H): 1,400 x 1,500 x 1,880 mm Weight: 750 kg Stop and measuring system AMS 200 For precise cutting-to-length of aluminium profiles Serial No.: 1050126568 Length: 4,500 mm Positioning accuracy: +/-0.1 mm per meter Electrical connection: 230 V; 1 Ph, 50/60 Hz Pneumatic position locking Matrix display 5.7" with membrane keypad and navigation dial for operating menus Memory for 1,000 records The memory can store set number, length measurement, profile number, angle position, and quantity. USB interface (front) Roller conveyor Iedexn Umljpfx Afietn (Changes and errors in technical data as well as prior sale reserved)

Condition: ready for operation (used), Year of construction: 2005, CNC for profiles elumatec SBZ 122/30 from 2005. Equipped with a double-sided lateral unit for side machining. Five-position tool changer. Profile length measurement. Four clamps for profile fixing, positioned automatically. Photoelectric safety barrier during operation. Machine in good condition. Invoice. Itedpfxjxmratj Afijn

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Elumatec KF 78/23 – 2-Spindle Copy Router Professional milling machine for aluminium, plastic, and light metal profiles Isdpfx Afjxl Hp Teietn Horizontal machining area (with stop): 300 × 100 mm Horizontal machining area (with copy template): 270 × 70 mm Horizontal travel: 80 mm Vertical machining area (with stop): 290 × 100 mm Vertical machining area (with copy template): 230 × 70 mm Vertical travel: 120 mm Spindle speed: 12,000 rpm Profile clamping range: 150 × 150 mm Motor power: 0.74 kW Power supply: 230 / 400 V, 3-phase, 50 Hz Compressed air connection: 7 bar Air consumption per cycle: approx. 12 l (without cooling), 24 l (with spray operation) Machine dimensions (L × W × H): 940 × 1,150 × 1,600 mm Weight: approx. 260 kg

Condition: used, Year of construction: 1999, x-axis 6450 mm y-axis 400 mm z-axis 380 mm working lenght 6500 mm Number of tools 8 St. tool taper BT30 tool changing time 1,2 sec diameter of tools max. 80 mm Iodpjt H Sn Rjfx Afistn turning speeds 6000 U/min Feed speed X = 34 m/min. Feed speed Y+Z = 18 m/min. total power requirement 8,5 kW dimensions 9800 x 3000 x 2400/3300 mm weight 5400 kg *Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 20496, Large cutting range despite compact design Copy routing using side stops or templates at a ratio of 1:1 Pneumatic tracer point with two levels for two different cutter diameters Our patented copy lever suspension ensures precision routing with a minimum of effort The table height is adjustable to accommodate very high profiles of up to 400 mm The “Spindle Lock” feature makes tool changing easy Pneumatic material clamping unit Pulsed coolant system Horizontal cutting range using a stop 300 x 120 mm Horizontal cutting range using a copy template 285 x 110 mm Spindle speed 12,000 rpm Clamping range for profiles 150 x 130 mm, adjustable up to 400 mm Travel 105 mm Iedoxmux Eepfx Afiotn Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 780 mm, depth 790 mm, height 1,545 mm, weight 210 kg -New spindel bearings -Machine is operation ready -Shipping possible

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC Profile Machining Centre | elumatec SBZ 610 - Power: 30 kW - Control: Beckhoff CP7032 - with material feed, automatic end stop, downstream material buffer Itsdpfoxn Nfcjx Afisn An inspection is possible at any time by appointment. #Tags: elu | SBZ | Profile Machining Centre

Year of construction: 2010, condition: excellent (used), functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Iodpfxow Dzago Afiotn Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: used, Year of construction: 2018, CNC machining center ELUMATEC SBZ 607 equipped with 11 tool stations (9 motors + 2 screwdrivers), designed for all main standard machining operations on window and door profiles. It enables milling operations such as drainage slots, lock cases, recesses for mounting plates, ventilation holes, as well as drilling for reinforcement brackets, transoms, tilt-and-turn locks, pins, and accessories. It is also prepared for free-form milling of gasket grooves and marking of closing components. Technical specifications: Tool stations: 11 Maximum profile length: 4,000 mm Maximum profile depth: 400 mm Spindle speed: 24,000 rpm Ijdexltxhspfx Afietn Perfectly suited for the complete processing of aluminum or PVC profiles, ideal for window and door manufacturers or industrial producers.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) The machine has hardly been used over the past three years as we have two other machining centers. Itjdpfx Aexlq Rbjfion Bar machining center ex works (can be dismantled and collected at any time)

Condition: used, Elumatec SBZ 130 – 3-Axis Profile Machining Center, 8.5 m For sale is an Elumatec SBZ 130 profile machining center, 8.5 m version, year of manufacture 12/2006. The machine is pre-owned, in perfect technical condition, immediately available, and ready for operation. — Technical Data • Model: SBZ 130 • Year of manufacture: 12/2006 • Axes: 3 Machining capabilities: • Efficient and economical machining of aluminum, steel, and stainless steel profiles • All operations (milling, drilling, tapping) performed on a stationary profile bar, preserving the surface finish • Traveling turret head for short tool change times and optimal machining cycles • Turret head can be equipped with 8 tools or 4 angular milling heads • Automatic clamp repositioning for precise placement of workpiece clamps • 3-axis control, tool spindle serves as an additional axis • Angle heads for lateral and end-face machining Operation & Control: • 18.5” panel PC • USB and network interfaces • Windows operating system • eluCam software Working area: • Machining length: 8.5 m • Max. end-face machining length: 8,380 mm • Max. length without end-face machining: 8,500 mm — Condition & Scope of Delivery The machine has been serviced annually by Elumatec customer service and is in good, well-maintained condition. • Inspection possible at any time • Function video available • Loading and transport possible without any issues — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Isdpfxsxiy U Ds Afijtn

Year of construction: 2004, operating hours: 4,500 h, condition: good (used), Aluminium and PVC line for windows and doors. EV832, DG79/79, ES 710, AF 221/100, GLS 192/06, GF 171. All are in good working condition, €15,000 net. Ijdpfxew Tukpe Afistn

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm Isdow Sadropfx Afistn Storage location: customer

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 Isdeuw T Stjpfx Afijtn - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support