Used Elumatec Kf 178 for sale (104)

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg Nwjdpfx Aoywxywjhvod

Condition: excellent (used), Shipping within the EU: 350 euros Nwjdpfxol Sklgo Ahvjd

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm Njdpfx Asyxnx Sehvewd With template: 230 × 70 mm Travel: 120 mm

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Nwedpfxow Syzqs Ahvjd Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 Nwodpfevi R Avox Ahvod EU shipping - 350 euro

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. 6.000 mm Nsdpfx Aohvrz Tjhvswd

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Nwodjw Sadropfx Ahvjd

Condition: used, This Elumatec profile machining centre, model SBZ 122/71, is being auctioned online in our industrial/machinery insolvency auction for metalworkers – Elumatec, vehicles, trailers, tools, sea containers, workshop equipment, and office fittings. Nsdpfxjyxd Tle Ahvjwd

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Nodpfx Aoywxwpehvowd Max. push length: 3000 mm

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15000502019, SBZ 150 CNC for machining aluminium profiles. 6 m machining length. We have used it to mill LEDs into rafters, process rafter ends and machine window profiles. Elumatec has already been commissioned to carry out a service before the machine is sold. Includes computer, light barriers, cutters, saw blades, and much more. 6 m machining length. Dimensions and weight: length/width/height (mm) 8500 / 3200 / 3000, weight 6400 kg. Nwedpfexc Nqbsx Ahvod

Condition: ready for operation (used), Year of construction: 2009, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2009. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) Nwsdpfx Ahjyv H Tiovsd • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Nedpfeyxgzxjx Ahvowd Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Nodpfx Aoyxgynshvswd Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. Nwsdpfx Aox E Rd Dshvod The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: good (used), Year of construction: 2013, Double mitre saw for aluminium The saw blades can be swiveled and tilted. Control system: E355 Includes circular saw blades and extraction unit Technical data: Smallest cutting length at 90°: 375 mm Largest cutting length: 4500 mm Swivel angle inwards pneumatic: 90° - 45° (Manual up to 22.5° inwards and up to 140° outwards with digital display) Tilting angle inwards pneumatic: 90° - 45° (Intermediate angles manually adjustable with digital display and turret stop) Saw blade diameter: 550 mm Saw blade speed: 2250 rpm Power output per motor: 4 kW Nedpfjyw R Rzox Ahvowd Dimensions: approx. 5790 / 1840 / 1985 mm Weight approx.: 2110 kg

Condition: used, Press height 140 mm Press force 70 kN (7 t) Hydropneumatic drive Nwjdpoyvgm Ajfx Ahvod Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: 122000029, We are offering this very well-maintained elumatec SBZ 122/75 profile machining centre, year of manufacture 2022. Type: 122/75 Serial number: 122000029 Year of manufacture: 2022 Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current: 20 A Short-circuit withstand strength (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Weight: 3,800 kg Maximum profile diameter: 180 mm Spindle speed: 6,000 rpm Maximum speed: 20,000 rpm If you have any questions or require further information, please feel free to send us a message or give us a call. Nwodpfx Ahsywku Tovjd

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Nsdpfx Ajtuvg Djhvowd

Year of construction: 2020, operating hours: 1,288 h, condition: excellent (used), functionality: fully functional, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles Standard version equipped with air-cooled milling spindle (optionally available with water-cooled milling spindle) All machining operations, such as milling, drilling, and thread tapping, are performed on a stationary clamped profile. Stepless machining between -90° and +90° with any available tool Automatic clamp adjustment with absolute measurement system Nwodpfjwxmdtsx Ahvsd The traveling tool magazine ensures short tool change times for optimal machining cycles. The magazine can hold up to eight tools. For double profile and end machining, a maximum of two swiveling angle milling heads are available, each with two different tools (0°–90°–180°–270°) (optional) Two separate machining zones for pendulum operation (optional). Area safeguarding is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system with eluCam SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, total length: 7,500 mm, total width: 1,500 mm, total height: 2,000 mm, Technical data – Elumatec DG 244/2, year of manufacture 2008 Control unit model: E555 – touchscreen Technical advantages of the machine: - Saw blade diameter: 550 mm - Blade speed: 2800 rpm - Compressed air supply: 7 bar - Weight: 2300 kg The machine is fully operational and can be tested on site. Price includes loading. We can also assist with delivery to the specified address. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is situated 120 km from Kraków airport (KRK). Transport possible. Export price. Nwsdpfxeyv E N Ao Ahvjd

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor • Turret/tooling: 8-position rotating turret head with 8-position tool changer • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Technical Specification Taper Size BT 30 Nwedpfx Aoyt Ifyshvsd

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details. • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: High-speed milling spindle • Tool system: • Tool changer: Turret head Nwsdpfx Ajyt Hg Nehved • Tool positions: 8

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04631037, cutting length (max.): 6,000 mm, Elumatec DG 104 Double Mitre Saw (Year 2006) – Precision Aluminium Processing For sale is a used double mitre saw, model Elumatec DG 104, manufactured in 2006. This machine is specifically designed for precision machining of aluminium and plastic profiles, making it ideal for use in window, door, and façade construction. Technical Highlights: - Double-sided tilting saw units for precise mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction for low-vibration operation - Pneumatic material clamping for secure workpiece hold - High cutting precision and repeatability - Intuitive operation Features: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying device Nwedpfsyvrq Tsx Ahved Condition: The machine is in used, fully functional condition. Normal signs of use are present, but do not affect functionality. Application Area: Ideal for metalworking shops, window manufacturers, and workshops that require precise and efficient mitre cutting. Other: Viewing by appointment possible. Loading can be supported if necessary. All information without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 530 kg, Pressing height 140 mm Pressing force 70 kN (7 t) Nwedpfx Aeyvk Rrjhvjd Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per work cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 534 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 0740320248, functionality: fully functional, Copy milling machine WSF 074/03 for drainage Nwsdpfoyvigxex Ahved