Used Copper for sale (501)

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Dsdpfxol Hxmde Ac Nokh

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Dksdov Da Dljpfx Ac Njh

Condition: used, Year of construction: 1998, Overview  This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details  Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood Hot wort: 17 hl Pouring: approx. 270 kg Commissioning: 1999/2000 Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) Recommended room height: min. 4.2 m Weight (empty): approx. 4,000 kg Control system: renewed after 2017 Dodpfx Acjw Afhfs Nekh

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: A1221E0223, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumetrik 840 D SL, Equipment: CE marking, safety light barrier, Type: TruLaser 3030 fiber (L81), Year of manufacture: 2020, Working area: 3000 x 1500 mm, Laser power: 4000 watts, Control: Siemens Sinumerik 840 D SL, Max. sheet thickness/steel: 20 mm, Max. sheet thickness/stainless steel: 20 mm, Max. sheet thickness/aluminum: 20 mm, Max. speed: 170 m/min, Accuracy: 0.1 mm Dimensions: Length 9,229 mm, Width 6,145 mm, Height 2,200 mm, Weight: 11,700 kg Machine number: A1221E0223 Equipment: • Longitudinal conveyor belt • Integrated control cabinets • Integrated storage compartment • Work area lighting • Positioning laser diode • Spray device • Permissible ambient temperature: 5–40°C • Machine status indicator • Dust protection for electronics panel TRUMPF Laser: • HighSpeed Cutting Package and Performance Package • Fusion cutting • Pump diodes drive • Laser power control Cutting Unit: • Single-cutting-head strategy • Universal cutting unit with adaptive lens system • Protective glass • Online protective gas condition monitoring • Automatic nozzle centering Control System: • SINUMERIK 840D SL control • Fast re-production • Integrated technology database • Copper cutting package • Brass cutting package • Automatic shutdown • Programmable selection of cutting gas/pressure • Microweld • Production planning • Remote support interface • Multi-sheet processing • Condition Guide • Cutting Guide • Advanced machine sensors for Condition Guide • Ergonomic control panel with 21.5" widescreen multi-touch display Functions: • AdjustLine • ControlLine • FastLine • FlyLine • NitroLine • PierceLine • FocusLine Data Transmission: • USB interface • RJ45 network port • Central Link • Online Update Manager Safety: • CE marking • Light grids • Multi-chamber extraction system • Machine enclosure with certified viewing window (right door) Additional Equipment: • Support rails made of structural steel • Compact dust extractor • TruDisk power supply via machine • Sliding roof • Automatic longitudinal pallet changer • External TruDisk 4001 solid-state laser with 1 fiber output included • 1 fiber output • BrightLine fiber • Performance Package fusion cut • HighSpeed cutting package • HighSpeed ECO cutting package • Drop & Cut Dkjdpfsxz Dwaox Ac Nsh • Integrated camera 1 for process monitoring • View of front work area (approx. 2.5 m) • Exhaust connection fitting for compact dust extractor • Wireless Operation Package + Including Storemaster

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD63CNC4A2SP, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 63 mm, bending angle (max.): 190 °, overall weight: 1,800 kg, total length: 4,000 mm, total width: 1,000 mm, total height: 1,300 mm, power: 18 kW (24.47 HP), input voltage: 380 V, type of input current: AC, number of digital displays: 1, warranty duration: 12 months, Equipment: emergency stop, foot remote control, Full-Automatic Single-Head CNC Bending Machine with Auxiliary Push Function Machine Model: BD63CNC4A2SP Machine Applications  Transportation Sector For municipal engineering, locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification Model: BD63CNC4A2SP The Largest Applicable Carbon Steel, Copper, Aluminum Pipe or Profiles Φ63×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * The Largest Applicable Stainless Steel or High Alloy Steel Pipe, Profile Etc. Φ55×2.0MM (THICKNESS MAX. 2.0) OR PROFILES AS PER MOLD DESIGN * Maximum Reciprocating Feeding Pipe Φ63MM PROFILE AS PER MOLD DESIGN * Maximum Feeding Stokes (*) 3200MM Maximum Bending Radius (*) 550MM Maximum Bend Angle 190° Maximum Core Pulling Distance 3500MM Equipment Working Height 1300MM Pipe Bending Servo Power 7.0KW Pipe Bending Speed MAX. 150°/S ADJUSTABLE Dkedpfoyaz Egsx Ac Njh Bending Accuracy ±0.1° Feeding Servo Power 2.0KW Feeding Speed 200-1000MM/S ADJUSTABLE Feeding Accuracy ±0.1MM Rotation Servo Power 1.0KW Rotation Speed 180°/S ADJUSTABLE Rotation Accuracy ±0.1° Hydraulic Motor 7.5KW Hydraulic System Pressure 12 MPA Total Power 18 KW Equipment Size: Length * Width * Height 4000*1000*1300mm Equipment Weight 1800KG

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 20,500 kg, fuel type: diesel, tank capacity: 1,500 l, color: white, power: 1,000 kW (1,359.62 HP), output current: 1,811 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 1,000 kW (1,359.62 HP), nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,250 kVA, total length: 6,060 mm, total width: 2,440 mm, total height: 2,900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, 6 units available. Diesel Generator Container – Cummins KTA50-G3 – 1,250 kVA Many other sizes available from 1,000 kVA – 2,500 kVA! For sale: one soundproofed diesel generator set in a 20-ft container, suitable for emergency (standby), island (off-grid), and grid-parallel operation. The unit is configurable for 50 Hz operation and comes fully equipped for automatic backup power applications. Performance Data 50 Hz PRP: 1,250 kVA / 1,000 kW / 1,811 A Voltage: 400 / 230 V Power factor: cos φ 0.8 LTP: 1,375 kVA Main Components Diesel Engine: Cummins KTA50-G3 Generator: Stamford PI734B Power Output: Integrated generator circuit breaker Connections: M12 cable lugs on copper busbar Noise Emission 75 dB(A) at 7 m ±3 dB(A) Operating Modes Island/off-grid mode Grid-parallel operation (with synchronizing device) Emergency power mode (integrated mains monitoring) Seamless resynchronization External circuit breaker control possible Equipment Engine pre-heater Battery charger Rapid power availability in case of mains failure: < 15 seconds 1,500-liter integrated diesel tank, switchable to external tank via 3-way valve Oil-resistant container base (catch basin for all fluids) Connections available for external/mobile fuel tank systems Container / Generator Construction Soundproofed design, 20 ft standard container Dkedpfeygaavex Ac Njh Exhaust outlet: top Air outlet: top Air inlet: front side Dimensions: Length: 6.06 m, Width: 2.44 m, Height: 2.60 m + 0.30 m exhaust flap Weight: approx. 20.6 t incl. diesel Fields of Application: Emergency power supply, industrial facilities, infrastructure, construction site power, temporary power supply Price: on request Location: Pupping, Austria Availability: 6 units in stock

Condition: new, Year of construction: 2026, Robust, high-quality CNC-controlled double standing seam roll forming machine for roof coverings. Maximum sheet width at the infeed side: 850 mm Maximum material thicknesses: Copper / Titanium zinc / Aluminium 0.8 mm / Galvanized steel sheet 0.7 mm Minimum workpiece length (panel length): 400 mm 2 x 7 forming stations Maximum seam height: 26 mm Infinitely adjustable processing speed up to 15 m/min Drive power: 1.5 kW Dodeyf U Npjpfx Ac Nskh Power supply as per customer specification: 220V or 400V Weight: 500 kg - Transverse and longitudinal cutting device - Manual adjustment of the transverse cutting device - CNC-controlled longitudinal cutting with an accuracy of +/- 1 mm Optionally available with a longitudinal stiffening rib unit (for introducing reinforcing ribs)

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Dedpfxow R Rane Ac Nskh Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: 2026BD25, bending angle (max.): 190 °, overall weight: 1,000 kg, total length: 1,800 mm, total width: 850 mm, total height: 1,230 mm, power: 8 kW (10.88 HP), input voltage: 380 V, type of input current: AC, warranty duration: 12 months, control cabinet height: 1,200 mm, Single - Head Servo CNC Pipe Bending Machine BD25CNC3A1S Machine Model: BD25CNC3A1S Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Maximum Bending Pipe Diameter × Wall Thickness (Normal Steel, Aluminum, Copper etc.) Φ25mm×1.2mm Maximum Bending Radius R150mm Maximum Bending Angle 190° Maximum Feeding Length 1200mm Working Speed: Bending Speed Max. 150°/s Working Speed: Pipe Rotating Speed Max. 200°/s Working Speed: Feeding Speed Max. 1000mm/s Dedpfjyak E Nox Ac Njkh Working Precision: Bending Precision ±0.1° Working Precision: Pipe Rotating Precision ±0.1° Working Precision: Feeding Precision ±0.1mm Data Transmission Mode 1. Coordinates (X.Y.Z) 2. Working Values (Y.B.C) Bending Mode Servo Bending

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dodpfx Acorkntco Njkh Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Year of construction: 2026, condition: new, functionality: fully functional, This robust professional cable stripping machine, model KM1-F, processes electrical cables with diameters ranging from 1 to 70 mm. This model features speed control via a frequency inverter. - The blades are hardened, ensuring they do not dull quickly when stripping armored cables. - The machine has 15 different cable feed entries. - The rollers feature grooves on their beveled surfaces for improved grip on the cables. - The cable is cut from both sides, allowing the copper core to be easily removed. - It is also suitable for stripping rubber and flat cables. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - Maintenance procedures are also detailed in the documentation. Technical specifications: - Power supply: 230 V ~ 50 Hz - Power: 2200 watts with geared drive - Dimensions: 60 cm long x 75 cm wide x 90 cm high - Machine speed: adjustable - Output: Depending on the cable type, between 400 and 1200 kg/day - Weight: 185 kg - Price includes VAT Spare parts such as blades, drives, bearings, etc., are also available. Dkjdpfoyfw Egox Ac Neh If desired, we can also perform maintenance on these machines. A machine that is ready for immediate use and easy to operate. If you would like to test it, please bring your own cable.

Year of construction: 2014, condition: ready for operation (used), A complete laser processing and marking system SIC-Marking is available. Stations: 3, table type: vacuum clamping table, processing area per station X/Y: 1000mm/1600mm, laser wavelength: 10600nm/1064nm, processes: evaporation/cleaning/structuring/surface processing, overall system dimensions X/Y/Z: approx. 25000mm/3000mm/3000mm, operating hours: approx. 2000h. Station 1: laser type: Synrad CO2 laser, number of lasers: 6, laser power: 100W, pulse frequency range: 0kHz-100kHz, power density: 250kW/cm², processed materials: polyamide/PVB/PET, processes: melting/evaporation. Station 2: laser type: IPG fiber laser, number of lasers: 6, laser power: 250W, pulse frequency range: 20kHz-500kHz, power density: 250MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: structuring/melting/evaporation. Station 3: laser type: IPG fiber laser, number of lasers: 3, laser power: 300W, pulse frequency range: 2kHz-200kHz, power density: 3MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: surface processing. The coating of the F-Theta lenses at station 2 is slightly deformed. Documentation available. An on-site inspection is possible. Dodpfx Acjyfv I Hj Nokh

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Dedpfx Acsg Icfps Nekh Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head Froehling Froehling is a renowned brand recognized for reliability and robustness in the field of rolling mills. 4Hi rolling mill head with bending and coilers. Specifications: Manufacturer: FROEHLING (Germany) – Refurbished 2004 Processable material: Aluminum alloys – brass – copper – low carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 - 2mm Coil size: ID 400mm – OD 1500mm Dodeg Ryqkepfx Ac Nekh Max. rolling speed: 400m/min Work rolls: Diameter 130mm – Table 340mm Back-up rolls: Diameter 390mm – Table 335mm Complete with: Uncoiler and recoiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, dismantled and loaded on truck. Ready for inspection by any interested buyer. For any questions, do not hesitate to contact us. PLEASE SUBMIT YOUR OFFER IF INTERESTED, WE WILL SURELY REACH AN AGREEMENT TOGETHER.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, overall weight: 10,400 kg, total height: 2,900 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 1030 was manufactured in 2011, featuring a robust fiber laser, TruDisk 2001, with a 2 kW output and a maximum material thickness capacity for mild steel at 25.0 mm. It operates with a SIEMENS SINUMERIK 840D control and can handle a maximum workpiece weight of 720 kg. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 1030 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Laser output: 2 kw • Laser type: fiber trudisk 2001 • Beam on working: 30000 hours Dsdpfxjyap Sbe Ac Njkh • Electric consumption entire unit: 11 kw • Control: siemens sinumerik 840d, b&r automation pc 620 • Simultaneous positioning speed: 85 m/min (x+y) • Working area (x x y x z): 3000 x 1500 x 75 mm • Brass: 3. 0 mm • Copper: 3. 0 mm • Mild steel: 25. 0 mm Extra Information Machine still under power Dimensions Machine Depth 7800 mm

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Dedpfoxb Uz Ajx Ac Nekh Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Dkodpsvx Hugefx Ac Noh Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 21,572 h, machine/vehicle number: A3231E0369, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning speed: 140 m/min, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2022). High-spec 2D fiber laser cutting machine with 3000 x 1500 mm working area and Siemens Sinumerik control. Key technical data Manufacturer: TRUMPF Model/Type: TruLaser 5030 fiber (L76) Year: 2022 Working area: 3000 x 1500 mm Laser power: 12,000 W Control: Sinumerik 840D SL Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Configuration / equipment (highlights) Box frame; longitudinal conveyor belt; gantry drive with linear direct drives Process cooler for machine and laser (water/air); work area illumination; pilot laser Spraying equipment; automatic nozzle cleaning; closed beam guidance via laser light cable (LLK); machine status light Cutting unit: protective glass with online monitoring; Dynamic Focus Control; automatic nozzle centering; adaptive lens system Functions/packages: AdjustLine, BrightLine Fiber, ControlLine, FastLine, FlyLine, FocusLine, NitroLine, PierceLine; fusion cut performance; high-speed package; copper & brass cutting packages Safety: CE marking; light barriers; enclosed protective housing; electrical rolling roof Dkjdpfx Acoyddbrj Nsh Dust extraction: compact / multi-chamber compact dust extractor (as configured) Connectivity: USB, RJ45 network; Central Link; Online Update Manager Pallet changer: automatic pallet changer in longitudinal direction Laser source: external solid-state laser TruDisk 12001 incl. Smart Beam Control Smart Nozzle Automation (nozzle changer + automatic nozzle inspection) Additional equipment: gas prefilters; wide transverse conveyor belt with tipping container (right side); cleaning brush; slag cart; dust extractor disposal units (2 x 30 L) Installation: mezzanine version (steel structure not included) Automation preparation: LiftMaster Compact preparation; LiftMaster Compact 1530 (AL34) available at additional cost Condition & availability Condition: used Available for collection: May 2026 (subject to decommissioning schedule). Viewing/cut test: by appointment (if still under power prior to removal). Commercial / logistics Ex-works (EXW). Buyer to arrange transport, machine will be decommissioned by authorised Trumpf engineers and loaded ono your transport. Export packing and documentation support can be provided if required. Enquiries Please contact for a full specification pack, serial details, hours (laser-on / control-on), service history, tooling/spares list, and video/cut sample requirements.

Condition: used, Year of construction: 2012, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness steel (max.): 14 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness copper (max.): 5 mm, workpiece weight (max.): 750 kg, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, For sale: Salvagnini 3kW Fiber Laser. Year of manufacture: 2012. The L3 is the first 2D laser cutting system designed and developed entirely to leverage all the advantages of fiber laser sources and linear drives, with features that make it the ideal solution for our customers’ requirements, such as: - Ease of operation - High productivity - Lower operating costs - Reduced energy consumption Key features of the L3 laser cutting system include: - Simple architecture with a purpose-built gantry structure, combining rigidity, precise positioning, high dynamics, and easy accessibility to the work area; - Highly efficient IPG fiber laser source; - Efficient control console for extremely easy and versatile production management, even directly from the machine PC; - High modularity of loading, unloading, sorting, and storage devices, offering a broad range of solutions for specific needs: from basic automation to fully automatic, unattended operation. Automatic pallet changer system for the laser table. Each table is equipped with steel, replaceable grids. Maximum sheet size: 3048 mm x 1524 mm Z-axis travel: 100 mm Maximum sheet weight: 750 kg Working table height: 980 mm Dodpsvulggjfx Ac Nokh Material Cutting capacity Mild steel (S185JR, S235JR, RAEX 250 C LASER): 14 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301): 10 mm Aluminum (Al 99.5 EN AW 1050A): 8 mm Copper (Cu-ETP CW004A H040 EN1652): 5 mm Brass (Cu Zn CW508L H055 EN1652): 5 mm L3-30 L3 Laser System GF Steel grids CRS Scrap containers SiX Controller FLR20 3000W Fiber resonator with chiller unit ASF Fume extraction ACUT Compressed air cutting option ADB Automatic sheet loading system Office Software Office software included

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 269588 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 29,9 (mit Absaugung) kW 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change Dkjdpjx U Elnefx Ac Noh

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 174688 € 3301.6 € 3 kW Manueller Tisch 16 mm 8 mm 8 mm 5 mm 8 mm 3060 x 1530 mm 3060 mm 1530 mm 140 mm 3048 x 1524 mm 160 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Aircondition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW Mild steelS235 20 25 Stainless steel(304) 10 15 Aluminium (5083) 12 20 Copper 6 10 Brass(CuZn39 Pb3) 10 Dodpex U Elhofx Ac Njkh 12 OPTIONS: Suction unit with filter Shuttle table

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei Dkodsx U Elbopfx Ac Noh 188488 € 3562.42 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 26,4 (mit Absaugung) kW 3100 x 1525 mm 3100 mm 1525 mm 125 mm 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,000 h, controller manufacturer: AMADA, controller model: AMNC-3i, This 3-axis AMADA ENSIS 3015 AJ fiber laser cutting machine was manufactured in 2021. It features a high-capacity 9000 Watt fiber laser, capable of cutting up to 25 mm thick mild steel, stainless steel, and aluminum. The machine includes an automatic pallet changer, NC-focus control, and a 21.5” touchscreen AMNC-3i control system. Ideal for precision cutting, consider the opportunity to buy this AMADA ENSIS 3015 AJ. Contact us for more information about this machine. • Type: AMNC-3i • Screen: 21.5” touchscreen • Operating system: Windows 7 • Laser source: Laser diode-pumped fibre laser • Type: AJ-9000 • Laser power: 9000 Watt • Laser wave length: 1.08 µm • Stability: +/- 2% • Pulse frequency: 1–10000 Hz • Duty range: 1-100% • Working range: 3070 mm x 1550 mm • Positioning speed: 170 m/min • Table loading weight: 920 kg • Mild steel: 25 mm • Stainless steel: 25 mm • Aluminium: 25 mm • Brass: 18 mm • Copper: 12 mm • Machine weight (without pallet changer): 9500 kg • Automatic pallet changer • NC-focus control • Oil spraying function • Nozzle changer (16 nozzles) • Sensor cutting head • Diode for positioning • Cutting process monitoring • Safety device • Conveyor belt • Transformator • Cooling unit Dksdpfox Uxkwsx Ac Njh • Dust collector • Control panel pallet changer

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 230188 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 27,9 (mit Absaugung) kW 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg Dkedpfx Aex Urp Hjc Nsh 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: good (used), functionality: fully functional, Year of construction: 2010, SCHECHTL MAZ/310/CNC-MRA-VSP motorized swivel bending machine The motorized swivel bending machine MAZ 310 has a working length of 3100 mm and bends 2.50 mm steel. The MAZ is the strongest and at the same time the most flexible in the team of eccentric machines. Working Length 3100mm. Capacities Steel 2.5mm Aluminium 4.0mm Stainless Steel 1.5mm Copper 2.5mm Dodpfx Acoyczhge Njkh Zinc 3.5mm Opening height 140mm Dimensions 4410mm length 2200mm width 2150mm height 3750kgs weight