Used Continuous Beam Facility for sale (10,299)

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. Cjdpfx Agoy Eyv Ajvsrc The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Scope of delivery includes: 01x CS profile, used Csdpfxox R Ambo Agvorc Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Weight per piece: approx. 45.00 kg Material thickness: approx. 2.5 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will apply. These can be quoted separately depending on the delivery location and scope of supply.

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Codpjtxirfsfx Agvjrc

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, Crsdpfx Ascbq Nwjgvec circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, with product pump In good condition. Credpfof Azwzsx Agvjc with mondotherm

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK ONE NCU 1750, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 In general: System:Industrial DED system Safety:Vacuum lock and inert gas purging Year of manufacture:2022 Weight:approx. 7,500 kg Geometry: Number of axes:5-axis kinematics with automatic tool changer Codjyy Hgkjpfx Agvorc Travel ranges (x/y/z):650×400×400 mm Table diameter:400 mm Table load capacity (max.):100 kg Measurement:Renishaw probe Lasers & Optics: Laser:Dual IPG laser Fine machining:500 W (IPG fiber laser, 200 µm fiber) High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber) Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro cladding Control unit: Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24" SIMATIC touch panel Process preparation:Via Siemens NX CAM and edge computing (IPC 427e) Monitoring:Live process control via HMI Display Manager and sensors for the chamber atmosphere Electrical specifications: Total power:62 kW. Current:110 A. Voltage:3×400 V / 50 Hz (control circuit Materials used: Material:Two Medicoat powder conveyors for titanium (Ti64), nickel-based alloys, steel, and hard materials

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, degree of automation: automatic, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. IN production, can be inspected on site. The price includes the chiller as well. Crsdpfx Agsy Dq E Ssvsc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Codetp I S Aopfx Agvorc

Condition: new, Your contacts in our company: Mr. Andre Evering Crsdpfx Agoh Dv Uqevec Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G, for soldering or annealing under exogas atmosphere. Codpfxoy Ddtis Agvjrc - Heating capacity: 137 kW - Soldering/annealing under exogas atmosphere - Conveyor belt width: 600 mm - Clearance above belt: 200 mm - Heated length: 3000 mm - Net throughput performance: 254 kg/h - Max. temperature: 1150 °C

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Crsdpedfcqajfx Agvjc SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Csdpfxsd Iya No Agvsrc Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: good (used), functionality: fully functional, Year of construction: 2025, As-new squared timber (softwood) available from late 2025. Stock: 120 squared timbers; packed and secured on EU pallets, 35/36 pieces per bundle. Csdpfx Agjy Amwhjvjrc Sold/given only in full bundle sizes.

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA Credpfxsy Akczo Agvec mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: defective spare-parts repository (used), Manufacturer: Arges Type: Elephant 36 Scanner Serial Number: (S/N 1105721 & S/N 1105722) Controller ASC-2 (S/N 650656 & S/N 650646) Cable set for one optic Location: Fulda Condition: defective and non-functional – only one cable set available – no software included Csdpfx Aeyv Av Tegvjrc – Due to age, spare parts are no longer available. – Suitable for use as a “project object” or “spare parts donor”.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Credswg Sgcjpfx Agvoc

Condition: good (used), Hello, we offer used Erowa clamping beams in the following dimensions: 220mm 300mm 380mm Csdjih Smajpfx Agvsrc 460mm Other dimensions would also be available. Delivery possible for an extra charge. If you have any further inquiries, we will be happy to address them.

Condition: like new (used), Year of construction: 2004, I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Crjdpfsppwtvsx Agvjc Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 1993, Underground liquid gas tank farm incl. pumps and control system The tank farm was used to store propane/butane and consists of the following tanks: 2 x 93,674 ltr. (15.6 bar, year of construction: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 79,208 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 58,101 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 52,145 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) Credpfx Aju Awitegvoc The tanks are buried underground and each has a dome shaft and corresponding monitoring fittings. The filling station incl. gas displacement line is available and installed (see photos). Five self-priming side channel pumps (Sterling, model CEHB) are installed for withdrawal. The system control is available and installed. All documentation is available.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, The Linx 8920 CIJ (Continuous ink jet printer) Print head included MIDI MK11 V4 Stainless steel machine stand included. Cedpfoyinpvsx Agvsrc Service module requires replacement. Serial number KF680 See data sheet below

Year of construction: 2026, condition: new, Continuous fryer ( ELECTRIC, GAS, OIL ) or frying train ideal for a large production auromatically, having the minimum use of labor and with high productivity. This chain fryer is designed for pre-fried, fried potatoes, fried foods such as croquettes, marble foods, flamenquines, nuggests, cachopo, plate of ham and cheese,... ,pastry products in general such as: churro, fritter, doughnut, xuixo, donut, creme filled pastry; Nuts: peanut, almonds, cashews,... Even for baking pasta. Thanks to its extremely simple control panel, it is easily programmable. Simply enter the ideal frying temperature on the thermostat and select the belt speed most suitable for the product. Our continuous cycle fryer saves you time in production. TECHNICAL CHARACTERISTICS: - It incorporates a speed variator that allows the regulation of the cooking time of the product that is made, with the intention that it always has the ideal cooking time and adapted to an infinity or products. - It allows a homogeneous frying or cooking, with less oil absorption at a lower cost thanks to the reuse and filtering of the oil. Thanks to this, the oil is more durable and of higher quality. - Optional availability of including extraction hood in the fryer itself. - Easy cleaning and disassembly. - Oil filtering system by means of a re-circulating pump to the tank. Mobile machine with brake Connection 240 / 400V, o G20 (GN) G30(GLP) Dimensions see various dimensions. New machine With warranty. Price from 12.230€ FEC60 = 60 Liters FEC70 = 70 Liters FEC100 = 100 Liters Crjdjg A Tvkspfx Agvjc FEC150 = 150/225 Liters FEC250 = 250/370 Liters

Condition: excellent (used), GEA FlowCook 8000/600. 8 metre cook length, 600mm wide. Excellent condition, has had very little use. Electrically heated. 283 KW Cedpox Ili Hjfx Agvorc

Condition: good (used), Year of construction: 2012, machine/vehicle number: EC1-065-2500, functionality: fully functional, We are offering this well-maintained ALTEC Maschinenbau Powerline 065 PowerLine PL-065 pressure beam/gluing press from 2012. Cedpfeyuvc Aox Agvsrc

Condition: used, Year of construction: 1995, weight max. 5 t stroke 7000 mm clamping width 10000 mm weight of the machine ca. 3220 kg 41 Factory No. 18/703395 Test log available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Cjdpfx Aeyutvmogvorc please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: ODW 2687/20, CONTINUOUS PRESS FOR SANDWICH PANELS The installation is part of a larger production line; please refer to our other listings for additional components. The plant is fully enclosed and equipped with a walk-on operating platform above the press. WORKPIECE DIMENSIONS (as previously manufactured): Length: 2,000 mm – 8,500 mm Width: 1,500 mm – 2,500 mm Thickness: 12 mm – 60 mm Maximum batch weight: 60 kg (potentially increasable, subject to confirmation with the manufacturer) TECHNICAL DATA: Total pressing force: 4,250 kN Specific pressure: 10 – 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110 mm Individual cylinder control: Yes Hydraulic operating pressure: 20 – 280 bar Multi-deck opening: 150 mm Maximum operating temperature: 80°C Approx. press weight: 57,000 kg Required air pressure: 6 – 10 bar Required extraction volume at air velocity v = 30 m/s: 3,400 m³/h Heat output: 2 x 110,000 kcal/h Heating medium: Hot water Customer-side supply temperature: 85 – 95°C Separate heating for top and bottom heating plates Cooling unit for reheating plates during product changeover INSTALLATION DIMENSIONS: Width: 5,066 mm Length: 9,604 mm Height approx.: 5,013 mm Crodpfxeyt Rhko Agvsc