Used Continuous Beam Facility for sale (12,434)

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request. Dcsdszhui Hopfx Aiisp

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained. Djdpfs Aduqaex Aiiocp

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap Djdpfjzlpahjx Aiijcp - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: excellent (used), BOEMA 300 L CONTINUOUS HORIZONTAL MIXER – STAINLESS STEEL BOEMA 300-liter continuous horizontal industrial mixer, designed to perform mixing, homogenization, and ingredient incorporation processes in food products within continuous production lines. The equipment features a horizontal mixing chamber, a top feeding hopper, and a motorized mechanical agitation system, which allows for the combination of different components and the production of a uniform mixture before further processing. Its construction, primarily in stainless steel, facilitates its integration into food industry facilities, especially in lines for preparing products with different textures and consistencies. MAIN FEATURES - Manufacturer: BOEMA - Type: Continuous horizontal industrial mixer - Rated capacity: 300 liters - Construction: Stainless steel - Horizontal mixing chamber - Continuous operation - Top feeding hopper - Internal mechanical agitation system - Mixing and homogenization of ingredients - Controlled product feed - Electric motor-reducer drive - Mechanical transmission system - Continuous product discharge - Connections for ingredient feeding - Chamber with access and inspection covers - Industrial structure on adjustable supports - Design for integration into automatic lines - Accessibility for cleaning and maintenance OPERATING PROCESS The ingredients are introduced into the BOEMA 300-liter mixer through the top hopper and the available feeding connections. Inside the horizontal chamber, the agitation system performs the necessary movement to distribute the components and obtain a homogeneous mixture. The product advances through the chamber while the mixing process takes place, allowing for continuous feeding and discharge. Once processed, the product is conveyed to the next stages of production. It can be integrated with feeding pumps, preparation tanks, cookers, heat exchangers, dosing systems, and filling lines. APPLICATIONS Especially suitable for canning industries, manufacturers of prepared foods, sauces, and food products with solid and liquid components. Dcjdpez R Tqhjfx Aiiep Depending on the installed configuration, it can be used for: - Sauces and prepared foods - Vegetable mixtures - Products with chunks and covering liquid - Preparations for canned goods - Mixtures of solid and liquid ingredients - Semi-liquid products - Prepared foods - Other formulations compatible with continuous mixing The BOEMA 300-liter horizontal mixer allows for the automation of ingredient incorporation and homogenization, maintaining a continuous flow of product to the next industrial operations. The usable capacity, agitation speed, production rate, and characteristics of the mixing system should be confirmed according to the installed configuration. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, Beam extensions for gantry cranes – increase the reach of your crane Beam extensions are professional accessories for gantry cranes that allow you to increase the working width of the structure. They are used wherever the standard crane width is insufficient – particularly in wide production halls, warehouses and industrial facilities. Manufactured from durable and resistant materials, they ensure reliability and long service life even in intensive working environments. Greater functionality and safety The extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger model. The maximum lifting capacity of the crane with extensions is 800 kg. However, it should be noted that when the extension exceeds 200 mm, the load capacity is further reduced. For this reason, it is essential to follow the manufacturer’s guidelines and carry out regular technical inspections of all crane components, including the extensions. Key product features: Enable quick and safe increase of the crane’s working width Simple installation – the set includes two extensions ready for mounting Robust construction – high-strength steel profiles Operational safety – compliant with industrial standards and health and safety requirements Compatible with CORMAK gantry cranes and other structurally compatible models Usage guidelines: Gantry crane extensions should be used in accordance with the manufacturer’s recommendations, particularly with regard to the reduction in load capacity after installation. The minimum extension width is 200 mm, and each additional increase results in a further reduction of the maximum lifting capacity. Regular technical inspections and proper maintenance are essential to ensure full operational safety. Applications of beam extensions The product is ideally suited for industries such as logistics, industrial manufacturing, steel structure assembly, the automotive industry and others. Versatility, durability and build quality make it an excellent choice for companies that expect flexibility and reliability from their equipment. Dcjdpfsycqh Nox Aiiep By choosing CORMAK beam extensions, you invest in efficiency, functionality and safety. Extend the capabilities of your gantry crane and adapt it to changing production or warehouse requirements! Technical parameters: Length 520 mm Width 131 mm Height 70 mm Number of pieces per set 2 Set weight 20 kg

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Dodpfxez H T Dwe Aiiecp Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: used, Year of construction: 1968, Equipment: - 1 material feed station - 1 twin-roll calender - 1 dyeing saturator - 4 washing sections (with squeezing units) - 4 box impregnation sections - squeezing unit - material discharge - material storage - docking station - mixing station Remarks: Dcjdj Ahwncepfx Aiisp - new control system (in 2024) - all 11 electric motors new (in 2024) - (SEW-Eurodrive)

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet The best bag sealer on the market Dcsdozbnnkepfx Aiisp Price € 9,500

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Dcjdpfx Aiozcff Aoiep Adjustable height Adjustable temperature control for different gauge bags Mobile on castors Bag infeed from right to left The best bag sealer on the market Price € 4,950

Condition: used, OK Continuous Bag Sealer Stainless steel Dcsdpjzcg R Tjfx Aiiop Adjustable temperature control for different bag gauges / micron Adjustable height mast Mobile on castors Price € 4,950

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Dcedo Aa Agbopfx Aiiep

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. Dcedpjzzdyzefx Aiiep TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 20307, functionality: fully functional, power: 108 kW (146.84 HP), input voltage: 400 V, input current: 270 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,120 °C, inner dimension length: 3,000 mm, inner dimension width: 450 mm, inner dimension height: 200 mm, total length: 16,800 mm, total width: 1,726 mm, total height: 2,398 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Conveyor belt tunnel furnace manufactured by Mahler. We used this furnace for the annealing of C-steel parts, utilizing 100% Exogas. The control system has already been upgraded, and all necessary maintenance and repair work has been carried out regularly. Inspection is possible by arrangement. Dcsdpfx Ae Af Imaoiiep Disassembly and removal will be carried out by the buyer, in accordance with the applicable safety and environmental regulations.

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) - The processing trough needs to be replaced. Dcodezqunzjpfx Aiijp

Condition: used, Year of construction: 2021, Electrically heated, twin-track tunnel furnace (push furnace) for debinding and sintering of PTC ceramics, manufacturer Riedhammer, type TP12.75/2X20/15-E-145, serial number R5-11-0040, order number RME-21-002610, year of manufacture 2022; usable volume approx. 0.6 m³, furnace length 12.75 m, usable width 2 × 200 mm, usable height 150 mm; maximum operating temperature 1,470 °C, including debinding up to 650 °C and sintering process up to 1,450 °C; electrical heating using Kanthal wire heating elements and SiC heating elements, maximum heating power 360 kW; 19 control zones, 19 load transformers; conveyor plate system with 126 conveyor plates in the furnace, plate dimensions 202 × 202 mm; conveyor speed 126–450 mm/h, furnace cycle time approx. 9–31.7 hours; measuring and control system, electrical connection value 659 kVA, 400 V, 50 Hz, pre-fuse 3 × 400 A; including handling system, manufacturer Theilinger, year of manufacture 2020, machine platform and control cabinets; noise emission below 80 dB(A). Dcsds Ah Tipspfx Aiiep

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense Dsdpfoz N Ahxsx Aiiecp

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of cooling: water, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fridge, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. IN production, can be inspected on site. The price includes the chiller as well. If you have any questions or need more information, feel free to send us a message or give us a call. Dcsdpfxsy Dq E Se Aiiop

Condition: used, Year of construction: 2017 2017 SagaFluid MCH180P037 Continuous Horizontal Mixer Industrial continuous mixer with a horizontal shaft configuration, manufactured by SagaFluid, S.L., Spain. Features a cylindrical mixing chamber, two large side access hatches for inspection and cleaning, and a supporting steel frame. Manufacturer: SagaFluid, S.L. Dcodpfx Ao Ahyhdsiisp Dimensions: LxWxH: 5000x1200x4500 mm. Series/model: MCH180P037 Year: 2017 Machine number: 16717-07 Drawing reference: 16717-07-01 CE marked *The factory is still in production, with operations due to cease shortly. The site will be cleaned before collections begin. Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Electric adjustable mast height Mobile on castors Dcjdszcrlcopfx Aiisp Excellent condition

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Dedpfx Aezqhgdjiijcp Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). Dsdpszzpb Refx Aiiocp - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995. Dcedpfx Aijzt Ip Reijp

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Dcjdpfx Aisvcdr Deijp

Condition: new, load capacity per storage section: 15,000 kg, total width: 1,100 mm, total length: 10,470 mm, total height: 4,000 mm, Thousands of further variants in stock and configurable online – fast delivery. For the rack shown in the picture: List price net 2,654.20 EUR - 10 % volume discount: - 265.42 EUR Dcsdpfe Ah Ukwsx Aiisp = Price net 2,388.78 EUR (2,843 EUR incl. 19 % VAT) Delivery to Germany and Austria included. Volume discount (also for several racks combined): - from 2,000 EUR order value: 10 % (already deducted in the listed price) - from 4,000 EUR order value: 15 % - from 8,000 EUR order value: 20 % For the rack shown in the picture: Max. load per pallet: 1,500 kg Number of pallet positions (incl. floor): 33 Decking: chipboard decking Parts list: - 5x Upright P150 4.0m high, bay load: 15.000kg - 4x Beam 185cm - 110x50 - beam level load 3.000kg - incl. safety lock - 12x Beam 270cm - 150x50 - beam level load 4.500kg - incl. safety lock - 22x Chipboard decking 890x1095x38mm mit >1000 kg/m2 Bruchlast - 88x Sicherungsprofil für Chipboard deckingn - 1x Load signs according to standard - incl. complete fixing material (bolts, floor anchors, base plates, safety locks, ...) You receive an invoice with VAT shown.

Condition: new, load capacity per storage section: 9,000 kg, total width: 1,100 mm, total length: 21,510 mm, total height: 3,000 mm, Thousands of further variants in stock and configurable online – fast delivery. For the rack shown in the picture: List price net 2,512.40 EUR - 10 % volume discount: - 251.24 EUR = Price net 2,261.16 EUR (2,691 EUR incl. 19 % VAT) Delivery to Germany and Austria included. Volume discount (also for several racks combined): - from 2,000 EUR order value: 10 % (already deducted in the listed price) - from 4,000 EUR order value: 15 % - from 8,000 EUR order value: 20 % For the rack shown in the picture: Max. load per pallet: 1,000 kg Number of pallet positions (incl. floor): 69 Decking: without decking Parts list: Dcjdpfs Ah Ugasx Aiiep - 9x Upright P90 3.0m high, bay load: 9.000kg - 4x Beam 185cm - 80x50 - beam level load 2.000kg - incl. safety lock - 28x Beam 270cm - 140x50 - beam level load 3.000kg - incl. safety lock - 1x Load signs according to standard - incl. complete fixing material (bolts, floor anchors, base plates, safety locks, ...) You receive an invoice with VAT shown.