Used Beam Liner for sale (5,601)

Condition: used, maximum load weight: 31,915 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,995 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Mega Liner, flatbed tarpaulin and bow structure with side sliding tarpaulins, sliding roof, light track tarpaulin, steel container doors with espagnolette locks, screen-printed floor, continuous lashing holes in the outer frame, support winch(s), front, rear, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, 2x storage box, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Iiedsvr Rk Sspfx Affsk We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser ----- Technical Data ----- Cutting length: 3,200 mm, Cutting width: 1,300 mm, Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: Isdpfxoxdl N As Affoik - complete basic inspection - complete basic cleaning - electrics checked - immediately operational

Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Insulation around top head and cylinder, not around bottom head; spray head connection slightly bent and weld seam on the top head cracked; discharge pipe internal diameter approx. 50 mm, widens towards its cut-off end to approx. 65 mm Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Insulation: present Power: 1.5 / 2.2 kW Agitator: beam agitator Agitator component: agitator flange Type of stand: height-adjustable feet Location: Bremen Volume: 14,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Last application: Dairy Iijdpfx Afjxqc S Ujfjk TANK Number of feet: 4 pcs INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder AGITATOR 1 Voltage: 400 Volt Bottom bearing:

Condition: used, Year of construction: 2015, Empty weight: 1.800 kg Attachment suited for: Agricultural machines Iijdpfxox I Nqzj Affok Auction item. Rake in working condition. Rake through the center. Sold as seen in the photos. Working width from 6.2 meters to 6.8 meters.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations Iijdpfx Ajx I Hyysffek FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P Iijdpfx Aewu Ahgjffsk

Condition: used, mileage: 761,535 km, power: 265 kW (360.30 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * MAN Truck Advanced Media Radio * Navigation, Bluetooth and hands-free system * On-board computer with multifunction steering wheel * Auxiliary heating ----* Distance control assistant * Emergency Brake Assist * Lane Keeping Assist * Hill Start Assist ----* Air/air suspension * Retarder * Differential lock rear axle ----Vehicle number: 8791----Irrors and prior sale reserved----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all formalities that arise when buying a vehicle, simply let us know your wishes and suggestions and we will take care of them For an additional charge, we can offer you the following services:----* Trade-in of your old vehicle * TÜV/SP approval * Complete export processing * Arrangement of financing * Application for export license plates * Transfer of vehicles * Registration of vehicles * Salvage and vehicle transportation Iodpovhvlmefx Affeik ----YOUR VTS TEAM

Condition: used, maximum load weight: 26,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 08/2026, loading space length: 13,310 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, Equipment: Rear impact guard, double rear doors, lift axle, air suspension with lifting/lowering device, landing legs, tread depth: 80% Safety & Environment: ABS, disc brakes, EBS ----KRONE Cool Liner Duoplex Steel Thermo King SLXi 300, Diesel operating hours: 2354h - KRONE axles with air suspension and disc brakes - 240L plastic diesel tank - Electrical connections: 7 and 15-pin - 36" pallet box - Toolbox - Warning sign - Water tank - Fire extinguisher - 2 spare wheel holders - DUOPLEX STEEL: thermal bridge-free panel construction, panels double-sided with steel cover layer - 100% CFC-free foam Iijdpfsx Iypnox Affjk - Aluminium angle base rail, approx. 300mm high ----* Our opening hours * Monday - Friday: 08:00 - 17:00 - Saturday: by appointment! * Outside opening hours, we are available by arrangement! * We speak: English, ????? ?? ????? ???? * Please note: Errors, prior sale and changes reserved * Leasing, financing, trade-in possible * All information without guarantee! ----

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 Iiedpfexqc S Iox Affjk MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: good (used), axle configuration: 3 axles, first registration: 12/2014, loading space length: 13,320 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,980 mm, color: white, Year of construction: 2014, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 8.849 kg Carrying capacity: 32.151 kg GVW: 41.000 kg Functional Make of bodywork: Krone Cool liner Thermo King SLX E 400 Cooling engine: diesel and electric (3270 operating hours diesel; 529 electric) Wall thickness: 50 mm Isdpfjx Ixd Rsx Affoik Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 02/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount Iiedpfx Ascbq Nwoffjk 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Spray head, lifting lugs Ijdexqc Szepfx Affjik Design: vertical Remarks: Minor dents in insulation jacket; some small cracks in the weld seams of the feet (see photos); 1 tank with nameplate (the outlet end of this tank is cut off) Speed: 42 rpm Outer diameter: 2,100 mm Inner diameter: 2,000 mm Total height: 4,550 mm Insulation: present Power: 2.2 kW Agitator: Beam agitator Support type: Feet Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: Dairy TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in top head Outlet: 65 mm MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head Agitator features: Tanks with different impeller diameters; 1 tank with bottom bearing, the other tank without

Condition: used, tank capacity: 118,000 l, GENERAL Design: vertical Outer diameter: 4,700 mm Inner diameter: 4,410 mm Total height: 10,860 mm Insulation: present Max. overpressure: 0.99 bar Agitator: beam agitator Support type: skirt support Location: Kundl (Austria) Technical documentation: drawing Nameplate: Vacuum: 0.25 bar Capacity: 118,000 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,500 mm TANK Ends: torispherical heads INSULATION Insulation jacket: riveted EQUIPMENT Manhole / dome: in shell, in top head Iedpfx Afjxqb Twsfjik Outlet: flange DN100 AGITATOR 1 Bottom bearing: Agitator arrangement: centrally mounted in top head

Condition: used, tank capacity: 1,023 l, GENERAL Equipment: Venting/inlet and outlet, ball valve Design: Container Comments: Frame Fe (galvanized) Speed: 97 rpm Inner diameter: 1,080 mm Total height: 1,950 mm Power: 0.75 kW Agitator: Paddle agitator Support type: Frame Iodpexqbunsfx Affsik Location: Bremen Technical documentation: Drawing, installation declaration according to the EC Machinery Directive, assembly instructions Nameplate: Volume: 1,023 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Factory new Cylindrical height: 1,000 mm TANK Max. allowable operating temperature: 80 °C EQUIPMENT Manhole / dome: in upper head, handhole Outlet: DN50 DIN 11851 MATERIAL QUALITY External surface: Mill finish IIIc AGITATOR 1 Voltage: 400 Volt Agitator arrangement: centrally located in the upper head

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 2 vessels (6169-3+5) with fractured intermediate flange on the gearbox Speed: 26 – 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-protected (conformity with applicable ATEX directives under local conditions must be verified) Total height: 4,200 mm Heating/Cooling: available Power: 6.8 kW Max. permissible operating temperature: 60 °C Max. permissible operating overpressure: 10.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam-type agitator Base type: Ring Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Jacket material: V2A 1.4541 (AISI304) Product contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,750 mm Last application: Chemical industry VESSEL Max. permissible operating temperature: 60 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole/dome: in the top head Iisdpfx Afjxqbuhefsk Outlet: flange DN80 Note: minor residues MATERIAL SPECIFICATIONS Foot material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 380/660 volts Current interrupter: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Agitator arrangement: centered on the top head Top head wall thickness: 9.0 mm

Condition: used, tank capacity: 8,000 l, GENERAL Iodpfx Afoxqbrmjfeik Equipment: Crane lugs Design: suspended Remarks: 3 feet made of V2A Speed: 61 rpm Inner diameter: 2,100 mm Total height: 5,500 mm Power: 22 kW Agitator: Beam agitator Support type: Footed (paws/feet) Location: Bremen Nameplate: Volume: 8,000 liters Cylinder wall thickness: 6 mm Product contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,500 mm Last application: chemical industry EQUIPMENT Manhole / Dome: in the top head Outlet: flange DN100 Note: slight adhesions MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Agitator arrangement: centrally in the top head Top head wall thickness: 8 mm

Condition: used, Year of construction: 2000, tank capacity: 6,779 l, GENERAL Design: suspended Year of manufacture: 2000 Remarks: Carrier ring made of Fe Isdpfx Ajxqbp Seffoik Speed: 114 RPM Inner diameter: 1,800 mm Total height: 4,550 mm Power: 37 kW Agitator: Beam agitator Base design: ring cut off Location: Bremen Nameplate: Volume: 6,779 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,200 mm Previous application: chemical industry EQUIPMENT Manhole / Inspection port: in top cover Discharge: flange DN100 Remark: slight adhesions, manhole cover missing AGITATOR 1 Agitator manufacturer: Fluid Voltage: 400/690 volts Agitator mounting: centralized in upper cover

Condition: used, tank capacity: 17,300 l, GENERAL INFORMATION Design: vertical Notes: 1 vessel (internal ID: 7081-3) with a minor dent and a cut-off connection at the top head Speed: 47 / 95 rpm Internal diameter: 2,900 mm Explosion protection: Motor is explosion-proof (conformity with applicable ATEX directives under local conditions must be verified) Total height: 5,100 mm Power: 17 / 27 kW Agitator: beam agitator Type of support: feet Location: Bremen Technical documentation: Drawing, TÜV certificates Name plate: Iisdpfxjxqbmwj Affek Volume: 17,300 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 1,800 mm Previous application: paint industry VESSEL Max. permissible operating temperature: 100 °C Specific gravity of medium: 1.2 (to/m³) Number of feet: 4 units EQUIPMENT Manhole/dome: on top head (DN 600), handhole Remark: Minor residues Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: steel AGITATOR 1 Voltage: 400 V TECHNICAL DATA / DIMENSIONS Bottom thickness: 4 mm Agitator mounting: centered on top head

Condition: used, tank capacity: 17,200 l, GENERAL Design: vertical Remarks: Outlets partially cut off; 1 tank (internal no. 7083-2) with 1 dent in the cylinder Speed: 47 / 95 rpm Internal diameter: 2,508 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 6,000 mm Power: 17 / 27 kW Agitator: Beam agitator Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates Nameplate: Volume: 17,200 liters Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,750 mm Previous application: paint industry TANK Max. permissible operating temperature: 100 °C Specific gravity of medium: 1.2 (t/m³) Number of feet: 4 pcs EQUIPMENT Manway / Dome: in top head (DN 600), handhole Note: slight adhesions Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: steel AGITATOR 1 Voltage: 400 V Iijdexqbmkepfx Affjk TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.5 mm Agitator arrangement: central in top head Top head wall thickness: 4.0 mm

Condition: used, Year of construction: 2002, tank capacity: 8,640 l, GENERAL Features: Ventilation/inlet and outlet, crane lugs Iedpfx Afexqbkijfsik Design: vertical Year of manufacture: 2002 Remarks: Agitator shaft cut off; welded bolts on the outside of the tank surface (see photos); 1 pipe inside; cylindrical manway approx. 340 x 440 mm Speed: 14 / 30 rpm Internal diameter: 1,980 mm Total height: 4,200 mm Power: 1.2 / 2.2 kW Agitator: beam agitator Support design: height-adjustable feet Location: Bremen Rating plate: Volume: 8,640 liters Product-contact material: stainless steel V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,500 mm Last application: lubricant production TANK Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder, in top head (DN 500) Note: slight residues, outlet pipe cut off Outlet: 50 mm MATERIAL SPECIFICATION Material of feet: stainless steel AGITATOR 1 Voltage: 400 V Agitator mounting: centrally in the top head

Condition: used, tank capacity: 6,510 l, GENERAL INFORMATION Design: suspended Remarks: Several connections were modified by the previous operator (not listed in TÜV documents); vessel mounted on 3 feet made of Fe (not on 4 as shown in the drawings); heating coil in cylinder located only in the lower cylinder area; insulation jacket has sheet metal cut-outs and dents Speed: 73 rpm Internal diameter: 1,900 mm Total height: 4,450 mm Heating/Cooling: available Insulation: available Power: 5.5 kW Max. allowable operating temperature: 165 °C Max. allowable operating pressure: 6.0 bar Max. overpressure: 2.00 bar Agitator: blade agitator Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 6,510 litres Double jacket volume: 34.0 litres Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,800 mm Last application: ethanol VESSEL Max. allowable operating temperature: 165 °C Number of legs: 3 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: Armaflex Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in upper head (DN 600) Ijdpfx Afoxqbaqsfjik Outlet: flange DN65 Note: light residues AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 V Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator position: centrally located in upper head Upper head wall thickness: 8.0 mm

Condition: used, Year of construction: 2007, tank capacity: 29,000 l, GENERAL INFORMATION Design: vertical Year of manufacture: 2007 Notes: Manhole diameter top head: approx. 700 mm; Manhole diameter shell: approx. 500 mm; Speed: 40 rpm External diameter: 3,200 mm Internal diameter: 2,980 mm Total height: 6,800 mm Heating/Cooling: available Power: 75 kW Max. pressure: 0.6 bar Agitator type: beam agitator Support type: legs Iedpfxsxqat Nj Affjik Location: outdoor storage Technical documentation: drawing, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 29,000 liters Double jacket volume: 4,100.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 3,368 mm Last application: adhesive production VESSEL Max. permissible operating temperature: 100 °C Specific medium weight: 1.3 (to/m³) Number of legs: 4 pieces HEATING/COOLING JACKET Bottom heating/cooling: double jacket EQUIPMENT Manhole / dome: in the shell, in the top head Outlet: DN 125 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 Volt Bottom bearing: TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 9 mm Agitator positioning: central, in top head Top head wall thickness: 7 mm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: upright Outer diameter: 890 mm Inner diameter: 650 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top head: removable / hinged top cover Agitator: beam agitator Support type: feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Iodpfsxqaqnox Affoik Capacity: 550 litres Double jacket capacity: 67.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended use: pharmaceuticals TANK Max. permissible operating temperature: 135 °C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Baffle: Agitator positioning: centrally mounted in the top cover Agitator details: agitator data not readable

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; a former manhole in the lower cylinder area was welded shut by the previous owner; the tank feet were cut off during dismantling and are now loose (some minor dents; see photos) Outer diameter: 2,900 mm Inner diameter: 2,700 mm Total height: 5,000 mm Heating/cooling: available Insulation: available Max. overpressure: 3.0 bar Agitator: beam agitator Mounting type: height-adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Last previous use: dairy VESSEL Number of feet: 4 pcs HEATING/COOLING JACKET Base tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top (DN 500) Outlet: available Note: pressure marks on the insulation jacket, outlet end cut off Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel Ijdpfxoxqanto Affoik AGITATOR 1 Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: eccentric in the top Agitator equipment: agitator data not legible; motor/gear unit shows signs of corrosion

Condition: used, tank capacity: 5,530 l, GENERAL Iiedpfexqamcox Affek Features: Spray head, crane lugs Design: vertical Remarks: Double jacket likely with trickle ring – suitable for non-pressurized temperature control only; the welding of the double jacket in the upper area has partially come loose; outlet diameter 65 mm (tapering to approx. 50 mm towards the vessel); minor dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm External diameter: 1,660 mm Internal diameter: 1,550 mm Overall height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. overpressure: 3.2 bar Agitator: blade agitator Base type: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: dairy TANK Max. permissible operating temperature: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manway / dome: on the top cover (Ø 450 mm) Outlet: present Note: outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Supply voltage: 380 Volt Bottom bearing: Agitator arrangement: eccentric, on the top cover