Hitachi zx 17 u for sale
Your location was not identified (Edit)
|
2
Wiener Neudorf, Austria
dealership location
17519 km
new
Tube Ø 20-170 mm Laser power 2 kW Delivery time approx. 3 months from order placement Laser power: 0,2-2,0 kW Wavelength: 1,070 1,080 nm Polarization: random Maximum heart rate: 5.0 kHz average current consumption: 25 kWh Max sheet thicknesses: mild steel: 8 mm Stainless steel: 4 mm Aluminum: 6 mm Maximum pipe diameter: 170 mm Min. tube Ø: 20 mm (Ø 12 optional) Maximum dimensions of square profiles: 120 x 120 mm Maximum dimensions rectangular profiles: 150 x 100 mm Maximum profile... more
|
|
3
Wiefelstede, Germany
dealership location
17866 km
used
Mounting plate, marking-out, sine plate, plate, measuring, welding table, welding table, ribbed dressing plate Very good surface finish Width 500 mm Babiidfpsh Length 800 mm Height 175 mm Thickness 26 mm -with supporting ribs Weight 90 kg more
|
|
6
Pressure total: 250 ton Ram stroke: 70 / 250 mm Ram adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Bbpdfxxten Ram surface area: 1.600 x 1.600 mm Number of strokes: 0 - 50 [...] Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm more
|
|
6
Düsseldorf, Germany
dealership location
18058 km
2016
used
Vehicle -Factory: Linde Type: L 20//0 hrs/HH 3.170 mm/FH 1,600 mm/New Device/Duplex/Battery BY. 2016 -Drive type: Electric -Load capacity: 2000kg -Load focus: I3ekgej -Lift height: 3170 mm -Range: 0 mm -Built: 2016 -Engine hours: 0 -Internal No.: E0603 _____ Mastast data -Masttype: Duplex -Lift height: 3170 mm -Height: 2100 mm -Free range: 1600 mm -Fork carrier: 0 mm -Forks: 1200 x 0 x 0 mm _____... more
|
|
12
Control system : EUROMAC Operating hours: 400 h Table dimensions: 1250 x 2250 mm Rated deformation force press: 30 t Accuracy - positioning: +-0.05 mm Accuracy - repeatability: +-0.1 mm Max. plate thickness: 0.6-8 mm Max. weight of workpiece: 150 kg Total input:.5 kVA Nk3lt Machine dimensions: l x w x 3980 x 3630 mm Machine weight: 7000 kg Accessories: 4 Cutting tools Regularly service more
|
|
13
Magazine Bar Loader No82r FMB Turbo 3000/1700/42-38 LMS Year 1991 Bar diameter max. 42 mm Bar length max. 3200 mm Continuous coupling 550 N Input speed 335 mm/sec. Feed rate 335 mm/sec. Return movement 335 mm/sec. Loading time (for 3200 mm bars) 30 sec. Operating voltage 380 V / 50 Hz. Control voltage 24 V Compressed air supply 6 bar Oil quantity 120 l Machine dimension L/W/H 5500 x 500 x 1500 mm Machine weight approx. 1200 kg Proposal Number V-3948 more
|
|
2
Wiener Neudorf, Austria
dealership location
17519 km
new
Tube Ø 20-170 mm Laser power 2 kW Delivery time approx. 3 months from order placement Laser power: 0,2-2,0 kW Wavelength: 1,070 1,080 nm Polarization: random Maximum heart rate: 5.0 kHz average current consumption: 25 kWh Max sheet thicknesses: mild steel: 8 mm Stainless steel: 4 mm Aluminum: 6 mm Maximum pipe diameter: 170 mm Bkxpp2h Min. tube Ø: 20 mm (Ø 12 optional) Maximum dimensions of square profiles: 120 x 120 mm Maximum dimensions rectangular profiles: 150 x 100 mm Maximu... more
|
|
3
Wiefelstede, Germany
dealership location
17866 km
used
Inductive sensor, electronic sensor -Ø6, 5 -M8 connector -10-30V DC -PNP -36 mm long Operating distance 2 mm -Stainless steel Vsaeei -2 x available price per piece Weight 5 g more
|
|
2
Make AZO / DMN Westinghoude, Type AL 175 2MZC, No 405098, New 2003, Material Stainless steel, Rotary valve , Rotor with scrapers , Rotor diameter +/- 100mm, Rotor width 210mm, Number of locks: 8, Lock sizes 210x80x65, Capacity 5,5 Ltr, Inlet dia.175mm, Inlet flange sizes dia.175mm, Outlet dia.175mm, Daylight 350mm, With motor 0,37 KW, 230/400 Volt, Outer laying bearings , Air purged sealings , Capacity +/- 3,5m3/hr, Floorspace 1,1x0,7 M, Total height 0,4 M, Weight 200 KG, Extra Specifications Qu... more
|
|
|
|
3
Maximum force (pressing): 175 t Maximum bending lenght: 3050 mm Distance between frames: 2600 mm Power demand: 18.5 kW Bffwtotk9y Axis: Y1/Y2/X und R axes Upper tool: 1010/A/75° Anti deflection: CNC Back gauge: CNC Travel of back gauge (X): 650 mm Machine height: 2750 mm Machine length: 4250 mm Machine width: 1700 mm Machine weight: 11500 kg more
|
|
7
ARBURG 570S 2200-170/70 2K machine / production line with Wittmann W831 robot, turntable, conveyor belt and protective housing Year of construction: 2010Injection unit: Screw diameter: 25 mmInjection weight: 54 g Injection pressure: 2500 barDosing volume: 59 ccmClamping unit : Clamping force: 220 tDistance between tie bars: 570x570 mmPlate size: 795x795 mmEjector: hydraulic Clamping unit: hydraulic Control:SELOGICAAAdditional equipment:Production line with robot Wittmann W831, turntable, conveyo... more
|
|
10
Anemonenweg 8, 33335 Gütersloh, DE
17923 km
1991
excellent (used)
Maximum cutting force: 1100 kN Maximum shear force: 1700 kN Bat2mcvbde Punching throat depth: 510 mm Locht 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square Notchers Weight: about 5000 kg more
|
|
5
Wiefelstede, Germany
dealership location
17866 km
used
Hydraulic cylinders, telescopic cylinders, telescopic hydraulic cylinders Retracted length 750 mm Extended length 2920 mm Hub 2170 mm Piston rods fit 86/107/129/152 mm Outer diameter 180 mm -4 x cylinders available Award pieces Dimensions of 500/500/H750 mm Weight 190 kg / piece Qkrbkv2kq more
|
|
6
Pressure: 175Abkantlänge: 3650 stands wide: 3100Einbauhöhe: 600Hublänge (max): 350Ständerausladung: 450Abmessung (Lxwxh): 4290x2290x3030Gewicht about: 12.3504 axes (Y1, Y2, X, R): all axes via the Delem DA 66 T SteuerungCNC camber control: Yes on the CNC Control Delem DA 66 TMotorleistung: 22 Standard equipment: Cppokj9g KK industries has the general representation of the Group Dalton. We have put together a high-quality model for Europe. The CNC press brake of KK industries made by Dale: ... more
|
|
2
Make Russell Finex Ltd (UK), Type 17300, No A2540, New 1994, Material Stainless steel, Vibro sieve , Sieve surface 0,2m2, Number of sieve decks: 1, Sieve sizes dia 500 mm, With cover , Inlet 100 mm, Outlet 140x75 mm, Drive excenter , Motor , Sieve perforation < 1 mm, Mounted on wheels , Floor space 0,8x0,8 M, Total height 1,3 M, Weight 280 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any desti... more
|
|
3
Good running used Cummins engine (diesel) type VT1710C Gvzh23gl 466 kW at 2100 rpm We have a wide range of new and used engines in stock. Please do not hesitate to contact us for pricing or availability. more
|
|
4
ARBURG 570S 2200-400/170 2K machine / production line with Wittmann W831 robot, turntable, conveyor belt and protective housing Year of construction: 2015 Injection unit: Screw diameter: 35 mm Weight: 141 g Injection pressure: 2500 barDosing volume: 154 ccmClamping unit : Clamping force: 220 tDistance between tie bars: 570x570 mmPlate size: 795x795 mmEjector: hydraulic Clamping unit: hydraulic Control:SELOGICAAAdditional equipment:Production line with Wittmann W831 robot, turntable, conveyor bel... more
|
|
3
Wiefelstede, Germany
dealership location
17866 km
used
Driving with the bezel, revolving bezel, put stock, Lynette-max passage Ø 170 mm run ball bearings Tip height 345 mm Add to them the photos Price per piece -1 x available Dimensions 605/80/H670 mm Cadwjdge Weight 59 kg more
|
|
4
Pressure: 175Abkantlänge: 3570 stand wide: 3570Einbauhöhe: 590Hublänge (max): 300Abmessung (Lxwxh): 5340x2100x2680Gewicht about: 11500Motorleistung: 22CNC camber control: jaCNC servo electric press brake CCIS MOD REVOLUTION DDM-17535Servomotorische press brake REVOLUTION servo-electric brakes contain no hydraulic system and the technology of tomorrow by your flexibility and reliability. Higher speed and precision of this new generation of machines offers the better efficiency, ergonomic proper... more
|
|
2
Make Werner + Pfleiderer (DE), Type 175/120, No 231457, New 1994, Material Stainless steel 1.4571 (316Ti), Granulating sieve , Grater , Sieve sizes dia.130mm x180mm, Sieve perforation dia.2mm, With hopper Dia.500mm, h=300mm, Inlet dia.130mm, Outlet 200x120mm, Motor 1,5 kW, 220/380 Volt (Ex), With extra sieves (4x)dia.5mm, dia.2mm, dia.1mm, Mounted on mild steel frame , Mounted on wheels , With switch , Floor space 0,7x0,6 M, Total height 1,5 M, Weight 160 KG, Extra Specifications        Â... more
|
|
4
2014 Komatsu D65PX-17 Straight Blade & Tilt, A/C Fb8mijp This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 1st-2nd November 2019 at 9am. To view full inventory or for more information please visit our website. more
|
|
10
Gronau, Germany
17990 km
good (used)
6.500 €
Starting bid not including VAT
Another 8 days Initial registration: 08/2017KM-Stand: 12.376 (per 14.10.19)Power: 50 kWColour: blackFurther information about the vehicle can be found on our website. Bfpz2h7nmm more
|
|
6
Type of fuel: Electric Colour: Red Field of application: Construction Drive: Wheel Empty weight: 7.500 kg Be3dlck8yy Mast: articulated arm Lifting capacity: 230 kg Working height: 1.700 cm CE mark: yes EPA marked Max. horizontal reach: 1100 m Max swing of arm in degrees: 350 Max swing of platform in degrees: 180 Transport dimensions (LxWxH): 6.46 x 1.5 x 1.95 more
|
|
5
Wiefelstede, Germany
dealership location
17866 km
used
Garden shredders, shredder, shredder -Suitable for gardens, home, land and landscape maintenance -Crushing, mixing, preparing in the combined usage Drive electric motor Brpx83ps -Einlauf ø 120 mm Performance 0.9 kW Speed 2900 RPM Weight 30 kg more
|
|
6
Field of application: Construction Empty weight: 14.200 kg Make of engine: Isuzu CC-4BG1TC Bqwjqol Technical condition: average EPA marked more
|
|
4
KotWing extension left, suitable for e.g. CF85Parent number: 0083117several on inventory condition for the closing of the purchase is a commercial commercial activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out ... more
|
|
5
2016 Hitachi ZX26U-5A CR Rubber Tracks, Blade, Offset, QH, Piped c/w 3 Buckets - choice E29uxy2 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 1st-2nd November 2019 at 9am. To view full inventory or for more information please visit our website. more
|
|
6
Böheimkirchen, Austria
dealership location
17558 km
2015
used
pressure: 175bending length: 3050column width: 2600daylight: 530stroke lenght (max.): 265column throat depth: 410messurements (LxWxH): 4250x1700x2750weight approx.: 11.500 Muhzfc more
|
|
5
Wiefelstede, Germany
dealership location
17866 km
used
Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump hydraulic unit comes from a CNC machining centre Hitachi Seiki HC400 Serial number of the machining centre HC40617 Geared motor 2.2 kW 1420 1 RPM 50 Hz -Max Druck 55 bar-max litre capacity 22 l / min dimensions 630/510/H600 mm Weight 136 kg Bber8khoq2 more
|
|
6
Field of application: Construction Empty weight: 14.200 kg Make of engine: Isuzu Bepfyfcky9 EPA marked more
|
|
4
Used Renault rear axle suitable for Renault Magnum Manufacturers: MeritorType: RSS1344C-MS17XTranslation: 2.64 Condition for the purchase is a business--active activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried ou... more
|
|
4
2016 Hitachi ZX48U-5ACLR Rubber Tracks, Blade, Offset, CV, QH, Piped c/w 3 Buckets - choice No9qz more
|
|
0
pressure 2500 t distance between columns mm stroke 1900 mm ----- PRESS DESIGN - drive system: hydraulic - frame design: H-frame, tie rod - number of slide actions 2 - slide ejectors / cushion: yes - table cushion: yes - opening in table: no - quick die change system: yes - moving bolster design: both sides Bfpvmp0grn PRESS FORCES - total force (nominal) 2500 to PRESS TABLE ... more
|
|
2
Plan disc Diameter 500 mm Cone diameter 122mm Hole circle 170 mm Fixing front Diameter mounting bore 22 mm 4 shares Height 115 mm Height with jaws 180 mm Nnyux more
|
|
5
Wiefelstede, Germany
dealership location
17866 km
used
Truck cab full cab system cabin, complete cabin Msifts -ungebrauchte cab for Clark electric forklifts or other -2 x doors -in the doors sliding Photos see data even other cabins available more
|
|
8
Ostrożne, Poland
17011 km
excellent (used)
motor 400 V / 2.0 kW speed 3500 U/min length of cut 410 mm (bei 90°) depth of cut 170 mm (bei 90°) Gfvvjxij miter range horizontally 45°-90°-25° miter range vertically 90°-45° (links) sawblade-O 420 mm suction plant 100 mm weight 120 kg more
|
|
5
Used Deutz Motor8 cylinder ReiheType: A 8 M 517Power: 125 KW/170 PSMotor comes from aggregate design suitable for FAUN 180 condition for the purchase completion is a business-/activity of the buyer and their corresponding proof. Please send us proof of your business/business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping/handover takes place only after proof of business/commercial activity. Sale an... more
|
|
4
2011 Hitachi ZX130LCN-3 700mm CV, QH, Piped c/w Reverse Camara, A/C -- choice Xkl783i This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 1st-2nd November 2019 at 9am. To view full inventory or for more information please visit our website. more
|
|
6
Böheimkirchen, Austria
dealership location
17558 km
new
pressure: 175bending length: 4050column width: 3550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 4790x2290x3030weight approx.: 13,2504 axes (Y1, Y2, X, R): Ja alle Achsen über die Delem DA 66 T SteuerungCNC crowning system by control: ja über die CNC Steuerung Delem DA 66 Tmotor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries m... more
|
|
6
Vehicle data - make: Manitou - type: 170AETJ L - drive type: electric - load capacity: 200 kg - load Centre of gravity:-lifting height: 0 mm - range: 9400 mm - year: 2019 - hours of operation: 10 - internal No.: 2773 _ __ Mast data - mast type:-lifting height: 0 mm - height: 1975 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 6925 mm - width: 1760 mm - height: 1975 mm - weight: 6950 kg _ Vsosui Battery & charger - battery voltage: 0 V - battery AH: 0... more
|
|
5
Wiefelstede, Germany
dealership location
17866 km
used
for glass scale, scale, digital display, dipstick, length measuring system, linear scale, fluorescent display, glass scale, scale, height gauge, linear scale, positioning display, digital scales, digital scale -for turning and milling machines Manufacturers Mitutoyo Fzxpixh Type ALC-1705W -2 x ads available Award pieces Dimensions 240/190/H125 mm Weight 2.3 kg more
|
|
14
Ostrożne, Poland
17011 km
excellent (used)
motor 400 V / 2.2 kW speed 3500 U/min length of cut 410 mm (bei 90°) depth of cut 170 mm (bei 90°) miter range horizontally 45°-90°-25° miter range vertically 90°-45° (links) Gvxumg sawblade-O 420 mm suction plant 100 mm weight 120 kg more
|
|
7
x-travel 6600 mm y-travel 3200 mm z-travel 1000 mm Beomv3fbu2 w-axis 1750 mm spindle motor 55 kW spindle turning speed range 5 - 2000 U/min spindle taper ISO 60 spindle diameter in front bearing 170 mm table lenght 1 + 2 6400 mm table width 2250 mm daylight between the side columns 2650 mm table load 50 t no. of tools in the magazine 60 Stück distance spindle nose and table 2500 mm control SIEMENS 840D feed range - table 10 - 15000 mm/min feeds crossrail-slide horizontal 10 - 10000 mm/min fee... more
|
|
4
2016 Hitachi ZX130LCN-5B 700mm Pads, CV, VG, QH, Piped c/w Reverse Camera, A/C - choice No9qf This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 1st-2nd November 2019 at 9am. To view full inventory or for more information please visit our website. more
|
|
2
Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Material Stainless steel, Housing material Stainless steel, Rotor material Stainless steel, Rotary valve for air transport , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180, Inlet flange sizes 315x175 stc.270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1x0.35 M, Total height 0.35... more
|
|
8
- lifting power: max. 8t - service recommended - processing on an electric motor Bfplntqcx9 - arm lenght: app. 12m more
|
|
4
Wiefelstede, Germany
dealership location
17866 km
used
Electric motor, three-phase motor 0.3 of kW speed performance 1330 RPM type B14 Protection class IP65 247/140/H200 dimensions mm Weight 7 kg Ngy3n more
|
|
|
