Used Beam Planer for sale (6,218)

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Shared motor with right spindle, with ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, chamfering unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electrical hood interlock: Yes Height adjustment of top spindle: electric with feed Feed brake system: Yes Feed speed steplessly adjustable up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan shaft Lubrication pump: automatic Max. jointing cutting depth: 10 mm Jointing cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle measurement display: digital readout Infeed rollers before jointer: Yes Air cushion table: two-lane Central lubrication point: Yes Description: Jointer table with jointing fence 1.0 m, pneumatic pressure Infeed roller before jointer driven rollers in table Tedpfx Asxr A Npsb Dod Total connected load: 52 kW Location: supplier

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Todpfxjxc D Tde Ab Ded Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, rotating bevel unit on the upper spindle with two-axis control for the left and upper spindle max. working width: 260 mm max. working height: 160 mm Number of spindles: 6 pieces 1. Spindle: bottom spindle diameter 40 mm clamping length 270 mm speed 6000 rpm motor power 11.0 KW 2. Spindle: right spindle diameter 40 mm clamping length 170 mm speed 6000 rpm motor power 11.0 KW shared motor with left spindle 3. Spindle: left spindle diameter 40 mm clamping length 170 mm speed 6000 rpm 4. Spindle: top spindle diameter 40 mm clamping length 270 mm speed 6000 rpm motor power 11.0 KW Spindle: bottom Spindle diameter 40 mm Motor power 11.0 kW Speed 6000 rpm Clamping length 270 mm 6th spindle: top Chamfering unit Motor brakes: mechanical Up/down adjustment of the upper spindle: electric, selectable with/without feed Feed brake system: Yes Continuous feed speed up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. chip removal for joining: 10 mm Jointing bevel cutter on planer: Yes Driven rollers in the table: 1 Control type: PLC control Dimension display on spindle: mechanical numerical display Infeed rollers in front of planer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Storage location: Nattheim Tedswwwkhepfx Ab Ded

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Tedpfxoxc D S Ho Ab Ded Latest generation IE-3 motors Spindle and feed brakes CE

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Tsdpfx Abou Au I To Ded Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Tjdpfel Dw Nxjx Ab Dod long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Tjdpog S Dm Nsfx Ab Dsd

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm Tjdpfxoi Apuhs Ab Ded - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Todpswwk Rbofx Ab Dsd Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2010016, planing height: 200 mm, spindle diameter: 50 mm, number of spindles: 9, planing width: 300 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Min. planing width: 20 mm Max. planing width: 300 mm Min. planing height: 10 mm Max. planing height: 200 mm Min. feed speed: 6 m/min Max. feed speed: 36 m/min Feed speed: Automatic Number of spindles: 9 pcs. Spindle 1 Spindle type: Bottom Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 3 Spindle type: Left Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 4 Spindle type: Top Motor power: 15 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 5 Spindle type: Right Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Todpfx Ajxq Aqdsb Dod Tool included: Yes Spindle 6 Spindle type: Left Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Spindle 8 Spindle type: Bottom Motor power: 15 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes Spindle 9 Spindle type: Universal Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool included: Yes MACHINE DETAILS Dimensions & Weight Dimensions: 7100 x 2200 x 1900 mm Weight: 12,000 kg EQUIPMENT Tools Documentation CE marking

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: tersa Tedpfjgqwx Ajx Ab Dod Number of knives: 4 Dressing table length: 2360 mm Dressing table adjustment: lever Gap removal indicator: scale Indication hollow - pointed joint: - Dressing fence angle adjustable: yes Motor power: 4,4 kW machine length: 2360 mm Machine width: 860mm Weight: 475 kg

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Tsdpfx Aswuuciob Djd Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Tedpjxtgz Eofx Ab Ded Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: used, x-travel 17700 mm Tsdpfovkit Asx Ab Djd y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: excellent (used), Catalogue number 7693 TECHNICAL DATA - shaft width: 810mm - max workpiece thickness: 170mm - 4-knife cutterhead * from above: - anti-kickback fingers - toothed feed roller, driven - pressure bar - planing cutterhead - pressure bar Tedpfx Ajwwr Hdsb Djd - smooth outfeed roller, driven - from below: 2 adjustable slip rollers in the table - electric table lift - 3 feed speeds - main motor power: 7.5 kW - dimensions (L/W/H): 1230x1600x1320mm - weight: 1360kg – Bulgarian made – 4-knife cutterhead – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on 4.2 EUR rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Four-sided planer Leadermac Smartmac 423 Tsdjxr U Hajpfx Ab Dod Working width: 15–230 mm Working height: 10–150 mm Number of spindles: 4 Spindle configuration: Bottom 5.5 kW Left Right 7.5 kW Top 7.5 kW First feed roller on the table is grooved for wet timber Feed speed adjustable via variator: 6–24 m/min Electric height and width positioning Spindles adjustable on two axes

Condition: excellent (used), set of tools, planer heads for moulder Tedpfx Aewbwkceb Djd

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Todpewuck Iofx Ab Djd

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Motor power: 3 kW / 4 HP Spindle speed: 5,000 rpm Spindle diameter: 120 mm Tjdpfxjxr R T Ae Ab Dsd Number of knives: 4 Feed speed: 8 + 14 m/min Maximum planing height: 230 mm Extraction port: Ø 150 mm Surface table: two-piece, foldable, synchronized on both sides Table height adjustment: via double universal joint shafts, handwheel with scale indicator Thickness planer: with outfeed roller, spring-mounted, feed rollers driven synchronously Fence: tiltable, inclination with magnifying scale display Standard features: TERSA cutter block or alternative knife block, brake, undervoltage release Dimensions: 2,040 × 410 mm (surface tables) Weight: 560 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Planer thicknesser 600 mm 2 knife shafts (wedge knife shaft) Planing width 610 mm, 2 feed speeds 7/12 m/min Planing height 200 mm Tedpfxev Hpvvo Ab Dsd 5 HP, weight approx. 1150 kg Joining guide, table length 2000 mm Aigner auxiliary stop

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm Tedpfx Ajqv Aivjb Djd - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Tjdpolhrk Ssfx Ab Djd Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Max processing width: 220 mm - Max processing height: 130 mm 4 spindles: 1) Bottom horizontal: 220 mm, approx. 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindles 2 & 3) 7.5 kW 4) Top horizontal: 220 mm, 7.5 kW - 4th spindle adjustment: electrically adjustable up/down Todpfxjp Dupge Ab Dsd - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 driven infeed rollers, toothed - Top: 1 driven outfeed roller, rubber - Bottom: 1 driven outfeed roller, rubber - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 1.5 kW - Lifting motor: 0.75 kW - Electric thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (L/W/H): 3430x1500x1430 mm - Weight: approx. 1500 kg – 4-head model – German-made – Not repainted – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on EUR/PLN rate at 4.2) (Prices subject to change according to exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7571 Technical specifications: - Roller width: 510 mm - Table length: 3040 mm - Noise reduction comb - Roller guard - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence with angle setting - Motor: 3 kW - Extraction port diameter: 130 mm - Dimensions (L/W/H): 3040x850x1000 mm - Weight: 1032 kg ADVANTAGES – German-made – Possibility to mount profile knives – Long tables – Used jointer – Very good condition Tjdpfx Abev H Dugo Djd Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NO. 7599 Tedpfx Abev R Um Ij Dsd TECHNICAL DATA - Shaft width: 410mm - Number of knives: 4 pcs - Max thickness of processed element: 240mm - From above: - anti-kickback fingers - toothed feed roller, driven, swivel - pressure elements - planing shaft - pressure roller - smooth driven outfeed roller - Motor: 5.5kW - Electric brake - Manual table height adjustment - 2 feed speeds: 7,14m/min - Extraction port diameter: 120mm - Dimensions (L/W/H): 900x1030x1100mm - Weight: 350kg ADVANTAGES – Italian manufacture – Used thickness planer, very good condition Net price: 14,900 PLN Net price: 3,540 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant exchange rate fluctuations)