Used Sound Engineering for sale (20,150)

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW Nkodpjfbgz Ijfx Ad Not useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: new, Gas-heated bogie hearth drying oven (not for flammable paint) Nksdpfxocmrxdo Ad Not temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar Nsdpfsd Sg Hhsx Ad Nokt PLC: Siemens S7

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Nkodpfewcwbqex Ad Not

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Nkjdsrt U Nuspfx Ad Not Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Nkjdst Uircopfx Ad Nst Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Date of manufacture - 2021. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  Nodjt Uim Hepfx Ad Njkt ✅ Electrical requirements - 220-240 V / 50 hz / 1 phase. Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Nkodexcal Ajpfx Ad Nst The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Nkjdpfx Adsxcalcs Nst The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Nkjdpfx Ajfn N U Hod Net

Condition: new, functionality: fully functional, A multihead weigher is a highly precise weighing system that simultaneously weighs products on multiple load cells. The ideal combination is calculated automatically, ensuring the target weight is reached with minimal deviation. Multihead weighers are especially suitable for free-flowing products. When combined with a vertical packaging machine, they provide a continuous, automated packaging process. Multihead weighers reduce product loss through exact weight combinations and enable higher cycle rates, particularly for expensive or delicate products. Nkodpfjw Ekh Nsx Ad Net Features - 10 to 36 heads available - Automatic frequency adjustment of vibration for uniform and precise product distribution - Automatic zero adjustment during operation for improved accuracy - Self-diagnostic alarm via popup window for easy troubleshooting - Option to select single or multiple drops for higher weights - Software-controlled side discharge for non-conforming weights, minimizing film and product waste - Live display of individual amplitudes for precise monitoring and control of each vibrator - Live display of individual weighing results - Centralized load cell feeding control replaces photoelectric sensor - Forced discharge function for frozen products to prevent melting when not selected - Weighing cells supplied by HBM - Program memory for parameter settings - Weigher available as a waterproof system at additional cost Technical Data - Max. speed: 60 weighings per minute (wpm) - Weight: 430 kg - Weighing range: 10–5,000 g - Accuracy: +/- 1.0–1.5 g - Hopper capacity: 1.3L, 2.5L, 4L & 5L - Control panel: 7'' touchscreen - Drive system: stepper motor - Level control: load cell - Surface: optionally stainless steel, surface-treated, or Teflon (other finishes on request) - Material: Stainless steel 304 - Connection: 220V / 50Hz

Condition: excellent (used), Year of construction: 1999, LNG Methan Gas Cryogenic Semi-trailer M1 Engineering Njdpfowp Iq Aex Ad Nskt Hersteller: M1 Engineering Baujahr: 1999 Volume: 49 m3 Working pressure: 8 bar. Tare 15435 kg Pump Flowmetter We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail

Condition: new, Technical data: Number of spindles: 42 (21 + 21) Spindle pitch: 32 mm Total spindle width in head: 640 mm Working table height: 860 mm Working table dimensions: 885 x 349.5 mm Motor: 2 x 1.5 kW/2 HP Motor speed: 2800 rpm Operating pressure: 6/8 bar Air consumption: 10 liters per cycle Extraction nozzle diameter: 80 mm Power supply: 380 V Nkedpfx Aeya Dfvjd Njt Overall dimensions: Width: 1070 mm Depth: 1035 mm Height: 1505 mm Net weight: 366 kg

Condition: used, Year of construction: 2007, functionality: fully functional, Machine available with or without camera system. New spindle integrated. Nkedpfx Aex Hyd Nsd Nst

Condition: repair required (used), feed hopper / buffer hopper Nkedewydmnopfx Ad Net

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) Njdpfx Aoxtfqxjd Njkt • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Nkedpfx Aed Skg Rjd Nst Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough * Nksdpfx Adsu Ibu Rs Nst

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 125 mm, cutting width (max.): 865 mm, input voltage: 400 V, Year of manufacture 2022. Display machine from a demonstration center with slight signs of wear. Item number MU 5650190-SP1 Max. cutting width 865 mm x 20 mm Saw blade diameter 400 mm Cutting height 125 mm at 90° Motor power 3.0 kW - 400 V Table dimensions 1970 mm x 1285 mm Nksdpfxewa Akxo Ad Njt

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BDG300 PV2 SP LA, Thread-Cutting/Machining Machine Oberburg – Precision Series Production Robust, fully automatic machining machine for thread cutting, cutting to length, or feed operations. Swiss quality from Oberburg Engineering (Guggisberg & Keller AG). Equipment: • Complete control with reset, start, feed • Sawing/milling module Njdpfxsw E Hfke Ad Nokt • Chip tray, clamping system • Change gears for precise machining (Morse 5+5) Ideal for: series production, screw production, metalworking Condition: complete, well-maintained, tested

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 400mm Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Total width: 1090mm Total length: 1090mm Materials Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Nksdperl Rrtefx Ad Njt Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Nkedpoh Uuhcefx Ad Nst Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) Nkodpfx Aswymlyod Njt - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: ready for operation (used), A fastening element press machine PEM-Penn Engineering and a small precision grinding machine Agathon are available. 1) PEM PemSerter Series 4, press force: 6t, throat depth: 450mm, stroke: 74mm, machine dimensions X/Y/Z: approx. 750mm/660mm/1700mm, weight: approx. 400kg. 2) Tool grinding machine Agathon, grinding wheel diameter: 175mm, grinding wheel width: 20mm, bore: 20mm, machine dimensions X/Y/Z: approx. 850mm/600mm/1300mm, weight: approx. 300kg. On-site inspection is possible. Nkodox R Dtvopfx Ad Net

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Nkodpew U Sw Aefx Ad Net Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm