Used Cnc Horizontal Boring Machine for sale (67,362)

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Ibjdpfxowq Dvdo Ap Hjb Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Year of construction: 2001, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Giddings & Lewis type HMC 410 Pallet size: 1.250 x 1.600 mm Pallet load: 7.000 kg max. Pallet change time: 55 sec. Number of pallets 2 pcs Table indexing: B-Axis 0.001° Table cross travel (X) 3.000 mm Ibjdpfx Asguk Icep Hob Spindle vertical travel (Y) 2.100 mm Column longitudinal travel: Z 1.800 mm Feed: X/Y/Z 1 – 40.000 mm/min. Rapid: X/Y/Z 40 m/min Rotary table 6 rpm Max rotary diameter: Ø2.500 mm Spindle taper: ISO 50 Spindle drive motor: 30 KW Spindle speed: 20 – 5.000 rpm ATC 120 pots CNC controller: Siemens Sinumerik 840D Max workpiece height: 2.000 mm Accessories Hexagon radio measuring probe Loading stations 2 PCS Build year 2001 (Siehe auch weitere Angebote des Inserenten.)

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Ijdozux Tcjpfx Ap Hebb Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, table width: 500 mm, table length: 630 mm, For sale is a horizontal machining center DMC 80 H hi-Dyn with 4 axes. The machine has only been used for milling and drilling cast parts for surface finishing. The spindle is in very good condition. Technical specifications: Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm B-axis: 360° Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Rotary table: 4th axis, 360° continuous Ibjdjytf N Aspfx Ap Hob Spindle: Direct drive, liquid cooled Replaced in 2023/2024 Measuring system: Glass scales Main drive: Max. speed: up to 10,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle Transport dimensions: LxWxH in meters: 5.2 x 2.4 x 2.7 Machine transport weight: 12,500 kg Dismantling, loading, and transport throughout Europe can be organized upon request for an additional charge. All prices are plus VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES ETC. Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: OKUMA MB-500H CNC Horizontal Machining Center Year of manufacture: 2003 Reliable and robust Japanese horizontal machining center equipped with an automatic 2-pallet changer, through-spindle coolant, and chip conveyor. The machine is in working condition and can be inspected under power at our facility in Croatia. TECHNICAL DATA Ibodpjzxq Itofx Ap Hjb Manufacturer: OKUMA Model: MB-500H Year: 2003 Machine type: CNC Horizontal Machining Center CNC control: OKUMA OSP WORKING AREA X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Distance from pallet surface to spindle center: 70 – 870 mm Distance from pallet center to spindle nose: 150 – 950 mm PALLET / TABLE Number of pallets: 2 Pallet size: 500 × 500 mm Maximum pallet load: 500 kg Pallet changer: Automatic rotary pallet changer (APC) Table indexing: 1° Pallet surface: 24 × M16 tapped holes The automatic 2-pallet system allows the next workpiece to be set up while the machine is running, significantly reducing non-productive setup time. SPINDLE Spindle speed: 50 – 15,000 rpm Spindle taper: SK40 / MAS 403 SK40 Spindle motor power: 26 kW / 18.5 kW continuous Spindle bearing diameter: Ø70 mm Through-spindle coolant (TSC) AUTOMATIC TOOL CHANGER Magazine capacity: 40 tools Tool holder: MAS SK40 Tool selection: Memory random Maximum tool diameter: Ø75 mm Maximum tool diameter without adjacent tools: Ø145 mm Maximum tool length: 350 mm Maximum tool weight: 8 kg FEED RATES Rapid traverse: up to 90 m/min Cutting feed rate: 1 – 60,000 mm/min EQUIPMENT Automatic 2-pallet changer (APC) 2 × 500 × 500 mm pallets Through-spindle coolant (TSC) Chip conveyor Automatic tool changer 40-tool magazine BT40 spindle Full machine enclosure Coolant system CONDITION The machine has been used in our own production and has been regularly maintained. Machine is fully operational and can be inspected under power. Location: Croatia Inspection and test run are possible by appointment. Additional photos, videos, and information are available on request. Loading/transport can be discussed separately. Price: on request / negotiable

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Isdpfxezav D De Ap Hobb Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, Used CNC machining center Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 supports in X, manually adjustable, 3 vacuum cups per console, vacuum pump 90 m³/h Ibedjy Nzw Nopfx Ap Hob vacuum connection for templates LED display for vacuum cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional central stop row 14 vertical drilling spindles + 6 horizontal horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis 360° interpolation, liquid circulation cooling – 18-position tool changer mounted on the Y-support Edge banding unit VT 100, four-sided/all-around – rotation range 740 degrees with 2-position roller magazine, automatic granule feed Adapter units: – fixed saw 90° – 4-spindle angle head Control ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on right side and foot mats at front; Rear: requires wall installation or separate safeguarding

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Isdpfx Apjy Uuw Tj Hobb Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: used, Year of construction: 2019, Machine design: Throughfeed/Return feed Working area in X-direction: 1300 mm Working area in Y-direction: 5600 mm Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 5.5 kW Main spindle speed: 1000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change stations: 3 Back wall grooving units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 Vertical drilling spindles - in Y-direction: 10 Horizontal drilling spindle in X-direction: 2 Horizontal drilling spindle in Y-direction: 6 Control system: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connection possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1800 kg Extraction diameter: 3x80 mm Machine was modernized in the factory; pressure bar and control technology from model 0572! Ibsdpoymp N Tjfx Ap Heb Storage location: Customer

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 Ibodpfezy N E Hjx Ap Hsb - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Max. working width (mm) 3200. Min. working width (mm) 215 N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 Ibjdpfjyyw S Rjx Ap Hob N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Ibsdpfszuwyzex Ap Hsb Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm Ibodjz Aun Sspfx Ap Hsb serial number 1933 weight of the machine ca. 10,5 t

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head Ibsdpeztn N Defx Ap Hsb ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: used, Machine is not operational, control system does not start, spare parts available with control system Horizontal machining center with pallet changer, STEINEL Type BZ 24 FFZ with CNC control system SIEMENS Sinumerik 850 M Mfg. No. 58, Year of manufacture 1990 Travel: X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, infinitely variable Tool holder: ISO 40 Power connection: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet location for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - Coolant nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control system SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement L x W x H: 9000 x 3100 x 3200 mm Weight: 13.5 tons Machine is not operational, control system does not start - otherwise in good condition Iodpfx Apedzqmfs Hobb Transport dimensions: Machine with tool magazine L x W x H: 9000 x 3000 x 3000 mm Chip conveyor L x W x H: 4700 x 1000 x 1450 mm Partial sales possible, please inquire about the required spare parts.

Condition: used, Year of construction: 2007, KIWA JAPAN KH-45 Horizontal center 4 axes Fanuc 31i control Year 2007 XYZ -640 x 610 x 680 B-360 degrees Iedpfsvnzgiox Ap Hobb Table 400 x400 Magazine 60 tools Taper BT40 Spindle 12000 rpm Spindle motor 22.4 kw Machine dimensions 4540 × 2400 x 2584 length width height Weight 9200 kg

Condition: used, Year of construction: 1984, functionality: fully functional, We offer this used Makino MC 65 horizontal machining center, year of construction 1984. Type: MC 65 Serial number: 80.4000.0107 Year of manufacture: 1984 Iedpfx Apszivz Tj Hobb Manufacturer: Makino Model: MC65 Year of manufacture: 1984 Control: Fanuc System 6M Technical Specifications Horizontal CNC Machining Center Twin pallet system Pallet size: 500 × 500 mm X-axis travel: 630 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Spindle taper: BT50 / ISO50 Spindle speed: 4,000 rpm Automatic tool changer: 40 positions Fanuc System 6M CNC control Included: Twin pallet system 40-position automatic tool changer BT50 spindle Machine documentation (if available) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button Ibsdpfszuw H Iox Ap Heb - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2013, Machine design: Throughfeed Iedpfx Apjx Urnie Hjbb Processing size in X direction: 1000 mm Processing size in Y direction: unlimited mm Processing thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 3.3 kW Tool changer: No tool changer Rear wall groove units: fixed in Y direction Vertical drilling spindles - in X direction: 5 units Vertical drilling spindles - in Y direction: 5 units Spindle speed, vertical drilling spindle: 4000 rpm Horizontal drilling spindle in X direction: 2 double spindles Horizontal drilling spindle in Y direction: 1 double spindle Spindle speed, horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Online connectivity possible: Yes CD-ROM drive: Yes Table version: fixed table with rollers Weight approx.: 1300 kg Dimensions: 2,200 x 2,470 x 1,590 mm Location: Customer site

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Ijdpfxjzux Rbj Ap Hsbb Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, CNC Table Type Boring and Milling Machine - Horizontal | Brand: UNION Type: BFT 105 | Year of construction: 1990 Machining operations: Boring, reaming, deep boring, precision boring, reaming, countersinking, tapping, milling, circular milling, thread milling. The machine can be inspected under power by prior appointment. Condition: Very well-maintained, second-hand / operating condition. TECHNICAL SPECIFICATIONS: - Travels: - X-axis (table transverse movement): 1.750 mm - Y-axis (headstock vertical movement): 1.250 mm - Z-axis (table longitudinal movement): 1.175 mm - B-axis (table positioning): 360° - W-axis (boring spindle axial adjustment): 450 mm Clamping table: - Clamping surface: 1.250 x 1.400 mm - Maximum workpiece weight with centric clamping: 4 tons - T-slot spacing: 125 mm - T-slot width: 22H7 mm Ijdpfx Aozlal Ijp Hsbb - Centring bore: 250 mm Boring spindle: - Diameter: 105 mm - Axial adjustment: NC-controlled - Tool holder: * with tapered shank: A 50 TGL 7837 * with steep taper: A 50 DIN 2080 * with clamping bolts: UNION 95-2805 (A 50 TGL 42620) DIN 69872-28 Speed ranges: - 3 continuously variable ranges: 4 – 2.500 rpm - Drive power: 23,7 kW - Max. spindle torque: 2.500 Nm Feed rates: Continuously variable feed range - X, Y, Z axes: 1 – 5.000 mm/min - Rapid traverse, X, Y, Z-axes: 10.000 mm/min W-axis: 5.000 mm/min B-axis: 3,2 rpm - Max. feed force: X and Y-axes: 16.000 N Z-axis: 25.000 N Specifications: - Total connected load: 50 kW/130 A - Voltage/frequency: 380 V/50 Hz - Machine weight (approx.): 17 tons - Dimensions: 6.560 x 4.370 x 3.450 mm EQUIPMENT: - 5-axis path control: Heidenhain TNC 355 - Swivelling control panel with central control station - Electronic handwheel - Other comprehensive ranges of accessories, such as tool holders, drill bits, milling cutters, and tool trolleys and cabinets ... - Comprehensive documentation available (foundation plan, circuit diagrams, hydraulic documentation, operating instructions and spare parts lists, programming lists) No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale -

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Pallete changer EROWA not come. Ibsdpfom Dtnrsx Ap Hjb

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Isdpfx Ajxy Tmnsp Hobb

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Ibjdpfx Aozwufgep Hob Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 1,200 mm, number of slots in tool magazine: 6, overall weight: 2,500 kg, Vertical drilling, routing and grooving CNC machine ideall for furniture production. Model: Morbidelli CX210 Manufacturer: SCM Group Production year: 2021 State: very good Weight: 2.560 kg Panel´s working dimensions: - min. dimensions: 200 x 50 x 8 mm - max. dimensions: 3.050 x 1.300 x 95 mm Ibsdszutgwspfx Ap Heb 3 axis electrospindle + 6 pos. toolchanger - tool attachement: HSK 63F - RPM: 1.500 - 24.000 /min. - power: 6,6 kW Drilling head F31LTC (RO.AX) - vertical spindles: 21 pcs - horizontal spindles: 3+3 in X, 2+2 in Y - 1x saw blade in X - 1x drilling head for hinges 45/9,5mm (can be changed for different type) Other equipment: - control panel Eye-M with touchschreen (21"), Windows 10 - 2 independent clamps - 3D probe for detection of precize panel´s dimensions (length, width, thickness) - control PC - Maestro Active + Maestro CNC - remote controller - automatic lubrication Machine availability: September 2026 It is possible to see the machine in run.