Horizontal Foam Cutting Machine CNC

Zakład Ślurarski DZIERGWA PARK

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Fsdpfx Aeu I R Uteh Ejgi Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, Fodpjtqqrfsfx Ah Esgi bundle clamping device, chip conveyor, coolant

Condition: used, Year of construction: 1968, roll diameter 500 mm Fgjdpfx Aoiqp Eroh Eoi throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. Fedpfszfvf Rsx Ah Eegi The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times.

Condition: used, mileage: 135,000 km, power: 78 kW (106.05 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,840 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,850 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Engine and transmission defective. The Iveco Daily 35 is an impressive, versatile, and practical commercial vehicle ideal for trades, service, and assembly work. With a displacement of 2,287 cm³, 135,000 km on the odometer, and first registration in November 2013, it provides a solid foundation for daily use. The automatic transmission ensures comfortable driving, while the practical shelving system keeps tools and materials neatly organized and easily accessible. The reversing camera further simplifies maneuvering. This is an immediately operational work vehicle that convincingly combines functionality, comfort, and proven Iveco technology. Fgjdpfx Ahszyv Rve Eei For sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. COC (Certificate of Conformity) available.

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Fsdpfx Ahjkkiwxe Esgi

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 Fjdpsin Nrgsfx Ah Ejgi – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: Fsdpfxjg Ey Ufe Ah Eogi -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 1997, condition: excellent (used), For sale we offer a blockmold machine with the following specifications: Fsdpfx Aon Tn Hreh Eegi Block dimensions: 1300 × 1040 × 5300/4000 mm – VARIO PLC control system: SIEMENS S7 Vacuum system pumps: SIEMENS Hydraulic system pump: BOSCH After being purchased by our company, the block mold underwent a comprehensive inspection, including the removal of all internal panels and thorough cleaning of the internal steam and vacuum channels. The machine is in excellent technical condition and is characterized by high efficiency. The offer also includes a complete set of documentation, including electrical, hydraulic, pneumatic diagrams, and technical drawings. We also have other EPS polystyrene production machines available for sale, such as: ICI CALDAIE steam generator (2000 kg/h) 2× steam accumulators with capacities of 10,000 liters and 20,000 liters (RUTHS tank) 3× EPS block cutting lines 2× blockmolds Pre-expander (high-capacity continuous pre-expander) There is also the option to purchase a complete production line (including installation, commissioning, and operator training).

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SH-30S PRECISA 400V Spindle Moulder The CORMAK SH-30S PRECISA 400V spindle moulder is a powerful and precise woodworking machine designed for professional wood processing in industrial plants, woodworking shops, and craft workshops. Thanks to its stable construction, interchangeable spindle, and wide range of spindle speeds, it provides the highest standard of performance when milling straight elements as well as complex profiles and shapes. Main advantages of the machine Stable cast iron table construction – provides excellent vibration damping and smooth movement of the workpiece. Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm – allows processing of various types of wood and wood-based materials. Reinforced and balanced spindle – ensures quiet, precise operation without vibrations. Height adjustment with scale – enables accurate setting of machining parameters. Complete standard equipment included – including tilting fence, workpiece holders, and assembly tools. Compliance with safety standards, DTR documentation, and CE requirements – ensures safe operation and conformity with regulations. Construction and technology The CORMAK SH-30S PRECISA spindle moulder is based on a high-quality cast iron body, which effectively eliminates unwanted vibrations during operation. The 620 x 510 mm working table has been precisely ground to ensure smooth and even movement of the workpiece. Fgsdpfsvugf Dox Ah Esi The 2.2 kW (400V) motor provides sufficient power even during intensive operation. With a spindle stroke of 100 mm and a maximum tool mounting height of 105 mm, the machine is capable of handling a wide range of milling applications. Precision and working efficiency The CORMAK SH-30S PRECISA spindle moulder combines high build quality with practical functionality. Multi-stage spindle speed adjustment allows optimal matching of operating parameters to the type of material and cutting tool being used. Precise guides and fences enable accurate positioning of reference points, resulting in excellent repeatability and consistently high-quality machining results. Applications The CORMAK SH-30S PRECISA is suitable for: Professional woodworking companies and production facilities, Furniture workshops and craft studios, Manufacturing decorative mouldings, grooves, tongues, tenons, and joints, Processing edges of straight and curved components. Standard equipment Tilting fence adjustable 60° left/right, Workpiece holder, Workpiece stop, Anti-slip feet, Assembly tools. Optional equipment Interchangeable spindle with ER20 collet chuck – enables quick machine setup changes and adaptation to different tools. Available at an additional cost of PLN 700 net.