Cnc machining center

KIWA JAPAN KH45

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Hsdpowzyr Aefx Ahvoi Year 2008

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm control HEIDENHAIN TNC 360 Hedpjv H Ertofx Ahvji total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Hsdjvzg Skepfx Ahvsi Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Hodpfxsr Hr Ars Ahvji Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld Hsdpfx Ahowxz D Usvji 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Year of construction: 2007, condition: used, machine/vehicle number: 46650051, Horizontal machining centre with multipallet+B39 NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor Hedpsgay Evjfx Ahvei High pressure cooling system through the spindle the spindle line

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm Hjdpet Hwupsfx Ahvji total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Hedpfx Ajrx Sh Ajhvsi

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment Hedsinh Rqjpfx Ahvei - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 Hsdpfx Ahsxn Aczsvei - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals