Used Cnc Corner Cleaning Machine for sale (68,346)

Condition: used, functionality: fully functional, working width: 850 mm, total height: 1,160 mm, total width: 748 mm, total length: 1,520 mm, noise level: 71 dB, battery capacity: 120 Ah, rotational speed (min.): 600 rpm, rotational speed (max.): 1,300 rpm, B 60 W BP DOSE (ROLLER) Ride-on Scrubber-Sweeper The B 60 W Bp Dose ride-on scrubber-sweeper is equipped with a drive system, a maintenance-free 120 Ah battery (2 units), and a user-friendly key system. This system enables simple and secure operation by regulating access and operating rights to protect against incorrect operation. The machine is ideally suited for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily mounted and replaced. Thanks to the eco!efficiency mode, the battery life is significantly extended, and the integrated tank flushing system facilitates cleaning of the dirty water tank after floor cleaning. Ride-on scrubber-sweeper (60 l) with drive system. Ideal for 1000 - 2500 m². Energy-saving eco!efficiency mode. Proven dual-disc technology. ■ Brush heads can be quickly mounted or replaced. Powerful drive system. ■ Convenient driving with stepless speed adjustment (forward and reverse). ■ Pre-settable maximum speed. ■ Operation via drive levers directly on the handle. With Dose detergent dosing system. ■ With on-board detergent dosing. Fpodpsx Hvvzjfx Akysn ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width, vacuuming mm 850 Tank, fresh/dirty water l 60 / 60 Brush speed rpm 600 – 1300 Brush pressing force kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type Battery Drive type Drive motor Mains connection Charger V / Hz 100 – 240 / 50 – 60 Dimensions (L x W x H) mm 1520 x 748 x 1160 Item condition: used, the images may vary, as the item is available in multiple quantities. Quantity: 1x Kärcher ride-on scrubber-sweeper B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and mileage or operating hours. You can find more cleaning machines - new and used - in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 008697, X axis working area: 3200 mm Y axis working area: 1250 mm Main Electrospindle power: 6.5 KW Fjdpfxezruzqj Akyjpn Number of controlled axes: 4 axes Total number of drilling spindles: 43 Total number of tool changer positions: 8

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm Fodpfsztyxdjx Akyjpn TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg Fpjdszkkc Uopfx Akyon CE Certification: Included

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Fpodpezapp Hjfx Akyen Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: not inspected (used), functionality: fully functional, machine/vehicle number: 1-105-2, spindle speed (max.): 3,000 rpm, total width: 3,590 mm, total length: 4,520 mm, total height: 3,400 mm, table length: 1,000 mm, table width: 1,000 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, power: 0.033 kW (0.04 HP), controller manufacturer: HEIDENHAIN, controller model: TNC 355, Immediate delivery. Fjdjz Hblpopfx Akyspn

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS 5-axis – year of manufacture 2003 – fully functional – ideal as a complete spare/donor machine. The machine is currently operational and can be inspected while running. Due to its age, various original parts are no longer available from Schüco. Therefore, the machine is being sold at any reasonable offer. Preferably sold as a complete unit; the buyer is responsible for disassembly and transport. TECHNICAL DETAILS X-axis: 6,650 mm Y-axis: 800 mm Z-axis: 500 mm X-axis feed rate: 0-40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0-30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: from 0-90° continuously C-axis rotation: from 0-360° continuously Rotation speed of B- and C-axes: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a length of 6,000 mm: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling: Ø 300 mm Maximum spindle motor power: 7 kW Spindle motor power for disc milling: 7 kW Spindle motor speed: 0-30,000 rpm Tool change time: < 15 s (from clamping to clamping) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 Total machine weight: 6.5 tons WORKING AREA Number of clamping blocks: 8 pcs Positioning of the clamping blocks: automatic Maximum profile length for 3-sided machining: 6,650 mm Fedpjxr N Rmsfx Akyepn Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Fpodpfx Aksvwbp Ajyjn

Condition: excellent (used), Year of construction: 2019, Sub-spindle, driven tools, Y-axis, C-axis FANUC 32i B-NT-SmartX control Fjdpfxovwkirs Akyjpn Turning diameter max 225 mm Turning length -910 mm Chuck Diameter -210 mm Main-spindle speeds 5'000 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Barloader LNS Sprint 565 S2 Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Fodpfx Aoz Nydkjkyopn Loading height: 800 mm Maxi load weight: 1500 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, FIXALINE FIXER C pipe cleaning machine, electromechanical cleaning used, from business liquidation Application range: 10mm shaft: DN 50–200 12mm shaft: DN 100–250 Technical data according to the manufacturer: Voltage: 220–240 V / 50–60 Hz / 16 A Speed: 2250 rpm Shaft length: 31 m Shaft diameter: 10 mm or 12 mm Dimensions: 122 × 45 × 90 cm Weight: With 10mm shaft: 74.5 kg With 12mm shaft: 78 kg Without shaft: 56.8 kg Features according to the manufacturer: Left/right rotation switch Speed control Foot switch Emergency stop switch Safety coupling Fpodpfx Akoz Ia S Dsysn including accessories, as shown in the picture. We recommend an inspection. Sale expressly excludes any warranty for defects. No guarantee or warranty. Information without guarantee. Information, data, and technical specifications provided by the manufacturer. To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors, and printing errors.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Fodpfxoxy Tmnj Akyopn

Condition: ready for operation (used), Year of construction: 2009, Pressing height 140 mm Pressing force 70 kN (7 t) Fodpjzxc Rmefx Akyspn Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Fpsdpfezr H Ivsx Akyon Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Cable remote control Central extraction port: 200 mm Weight: approx. 2700 kg Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Fedpjzt Twysfx Akyjpn Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Fpedpfx Asyymz Ujkyon Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: Fpsdpfx Aezrybpjkyon - Length: Various - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 8340020123, For sale: ELUMATEC EV 834 cleaning machine. The machine is in working condition. Fjdpfx Aksy Dfgksyjpn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Fpedjz D Tggepfx Akyjn Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min HITECO spindle in the HSK 63F standard Fsdoun Rqgepfx Akyopn Price of a new machine: approx. 135.000 €

Condition: excellent (used), FANUC Power Mate control Fsdpfx Asyla Nuskyopn Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean - Many tool holders included The screen is not defective; the black shadows are due to the photography. Fpjdpfoz Iz I Hox Akyen Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 770155, spindle bore: 42 mm, spindle speed (max.): 7,000 rpm, We are offering this very well-maintained INDEX C100 multi-spindle automatic lathe with an Index MBL bar feeder and fine cleaning system, manufactured in 2009. If you have any questions or require further information, please do not hesitate to contact us via message or by phone. Fpedpfxjz E Ikpo Akyjn

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden Fedpfx Aksz I Naweyspn z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Fjdpfswuclxsx Akyepn Total number of drilling spindles: 11