Used Cnc Saw for sale (13,562)

Condition: new, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, tilt adjustment saw blade: 45 °, 3-Axis CNC Panel Saw Model TECNOMAC ENG T45 V380/50 "CE" NEW - READY FOR IMMEDIATE DELIVERY ▸Aluminium sliding table 3200x430 mm ▸Table stroke: 3400 mm ▸CNC-controlled lifting/tilting/parallel fence ▸Parallel fence: 1300 mm ▸Blade tilt: 0-45° ▸Blade diameter: 300/350/400 mm ▸Rotation speed: 4500/6000 rpm ▸Main motor power: 5.5 kW Dsdjy N T N Rspfx Aiwjut ▸Scoring unit with independent 1.1 kW motor ▸Scoring blade diameter: 120 mm ▸Scoring blade speed: 8200 rpm ▸Parallelogram dust extraction hood ▸Machine start command on carriage ▸Hold-down device on carriage ▸Digital readout on extendable fence ▸Suspended control panel with PLC touch-screen Visible at our Gorizia premises (by appointment).

Condition: used, Year of construction: 1987, functionality: fully functional, feed length X-axis: 218 mm, feed length Y-axis: 218 mm, feed length Z-axis: 116 mm, For sale: fully functional CNC wire cutting machine for foam, Italian brand DB. Table size: 218cm x 218cm, maximum block height: 116cm. Duedey N A Rwjpfx Aiwet

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Djdpjy Nm Umsfx Aiwsut

Year of construction: 1995, condition: ready for operation (used), Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible. Duedpfx Aey D Trbeiwet

Condition: used, Year of construction: 2009, machine/vehicle number: 3122 102 015, functionality: fully functional, operating hours: 36,000 h, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, total height: 1,900 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, CNC Metal Sawing Center Kasto Kastoflex F Year of manufacture: 2009 Operating hours: 36,000 h Machine depth: 4,800 mm Machine height: 1,900 mm Machine weight: 2,700 kg Voltage: 400 V With automatic feed Offcut bunker Coolant system Mitre cutting Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, outfeed side with a 5 m long belt and programmable outfeed stations on both sides Minimum quantity lubrication Including from Kasto: 2 double-sided heavy-duty roller racks Dodpfoy Alufjx Aiwout with 2 uprights, each with 4 levels System professionally stored Ready for collection Layout attached Transport, reassembly, and commissioning at buyer’s expense

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm Duodpfx Aisyak Anjwet - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Dedpfxoyzpm No Aiwsut

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Duedpfxjyk Inpo Aiwjt Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase.

Condition: new, Year of construction: 2026, The CUBO 400 NC model is a modern band saw that ensures operator safety thanks to a guard made of specially designed metal sheets, protecting all four sides and all moving parts of the machine. The guarding system allows full access to the machine and easy maintenance. An innovative and user-friendly 7" touchscreen with an intuitive interface enables full control of all machine settings. It allows programming of up to 99 cutting programs and 10 different cutting lengths on the same bar. The CNC control provides access to all machine operating functions: automatic calculation of blade thickness, number of stroke repetitions, band speed, and blade lowering speed. The interface also allows monitoring of the CUBO operating status and diagnosing irregularities thanks to a self-diagnostic function. An integrated feeder enables automatic repetition of the cutting process. The feeder moves along a hardened and chrome-plated guide; high positioning accuracy is ensured by precise feeding via a ball screw with a self-braking motor, mounted on a floating plate to absorb loads caused by irregular bars. The saw body has a rigid cast iron structure made of square-section tubes, ensuring high resistance to deformation and better performance with all types of materials. The bow is equipped with a worm screw and a crown gear made of a highly resistant bronze alloy. A mechanical material detection device ensures rapid approach of the blade to the material by automatically detecting the first cutting point. The final cut is controlled by a microswitch on the blade guide, allowing perfect band alignment thanks to hardened metal pads and additional bearings. Automatic IMET machines can be connected to a company network and operated remotely using the SAWFACTORY system and a modem. SAWFACTORY is dedicated software that enables management of the cutting process from the office by setting programs and monitoring operation via a web application. The software also allows remote technical support. Technical parameters: Power supply: 3-phase 400V Total power: 2.2 kW Dedpjyym Eaofx Aiwjut Arm lowering control: Hydraulic with smooth adjustment Cutting speed: 18–110 m/min Vise base height: 890 mm Blade dimensions: 4020 × 34 × 1.1 mm Feeder length: 515 mm End scrap: 80 mm Minimum material length: 15 mm Dimensions: 1950 × 1800 × 1990 mm Weight: 990 kg

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 2,500 h, THIBAUT TC 625 – 5‑Axis CNC Bridge Saw (Used Machine) Description For sale is a THIBAUT TC 625 5-axis CNC bridge saw in very well-maintained condition. The machine is ideal for processing natural stone, quartz composite, ceramics, and similar materials, and is especially suited for kitchen countertop and interior fitting production. Technical Data Manufacturer: THIBAUT SAS (France) Model: TC 625 Machine Type: 5-axis CNC bridge saw Year of Commissioning: approx. 2020 Machine No.: 04.19 Voltage: 400 V / 50 Hz Spindle Power: approx. 13.2 kW Spindle Speed: 0 – 6,000 rpm Blade Diameter: 300 – 650 mm X-Axis Travel: approx. 3,970 mm Y-Axis Travel: approx. 2,300 mm Z-Axis Travel: approx. 500 mm Max. Material Thickness: approx. 200 mm Condition Machine powered – demonstration possible by arrangement Spindle hours: approx. 2,500 h Excellent technical and optical condition Regularly serviced Dedpfx Aieyuvhfswsut Ready for immediate use Features 5-axis CNC control Tilting worktable 3,600 × 2,000 mm Table adjustment from 0° to 85° Additional unloading table 3,600 × 400 mm Digital camera for slab imaging Tool and material probing system Vacuum lifter up to 500 kg ACS plunge cutting system Tool water cooling Software T'CUT basic software Vacuum lifter manipulation module Vein matching module Contouring and trimming module CAD/CAM software eT'CAM Application Areas Kitchen countertops Bathrooms and washbasins Staircases Processing of natural stone and quartz composite Ceramics and similar materials Sales Information Price: on request Location: Germany Availability: by arrangement Inspection / Test Run: Machine is powered – test possible

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Dsdpjxrg R Refx Aiwout Cutting lenght: 6200mm Blade 500mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability ● suitable for solid materials and profiles Technical specifications Dsdpfxjyc H Ewj Aiwjut ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - s/n 06 Dedpjimwtrjfx Aiwsut - CE rules (year 1998)

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Dodpfotufcdsx Aiwjut

Year of construction: 2003, condition: ready for operation (used), A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible. Dsdpfxeycwrhj Aiwjut

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Duedetufcaopfx Aiwet

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Dedevtdztspfx Aiweut

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Price from €uro 250.000 Duedpfx Aotynfgoiwjt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Duodpfevz Etmjx Aiwot Total power requirement 9 kw

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Dusdpfx Aox R U Epjiwjt Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Djdpsx Ruudjfx Aiwout Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers. Dodpfx Aiox Rut Tjweut

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Control software CNC MAXI 5 Premium Dodpfx Aisxrr S Hswout Line is in full working condition

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Duodjx N Icljpfx Aiwet Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal. Dedpsv U Ea Hofx Aiwout