Used Scm Minimax for sale (652)

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Spindle speed: max. 8,000 rpm Main motor power: 11 kW C-axis: Available Tool holder: HSK-F63 Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Gede Aidx Hopfx Agreui Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018/23, functionality: fully functional, operating hours: 12,371 h, travel distance X-axis: 5,709 mm, travel distance Y-axis: 1,650 mm, working width: 1,260 mm, milling spindle speed (max.): 20,000 rpm, working length: 5,200 mm, TECHNICAL DETAILS Working area X: 5,200 mm Working area Y: 1,260 mm Main spindle travel X: 5,709 mm Main spindle travel Y: 1,650 mm Gusdpo Ai Emhsfx Agrsi Number of workpiece consoles: 8 Drilling unit Total number of drilling spindles: 18 Vertical drilling spindles: 12 Horizontal drilling spindles: 6 Horizontal drilling spindles in the X direction: 4 Horizontal drilling spindles in the Y direction: 2 Milling spindle Motor power: 11 kW Speed: max. 20,000 rpm Tool holder: HSK-F 63 Number of controlled axes: 5 MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Phases: 3 Operating hours: 12,371 h EQUIPMENT Drilling unit with 18 spindles Keyway cutter Liquid-cooled milling motor Tool changer with 16 positions Side tool changer with 8 positions PC control

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table dimensions: 900 × 770 mm Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm Gsdpfx Ags Ad Igzsrsui MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance 520 mm working capacity 2015 CE Guodpfx Aez N Hfbogroi

Year of construction: 2018, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, panel saw -Manufacturer: SCM HOLZKRAFT, Panel saw type minimax SC 2C VRS-08 -Main motor: 4 kW -Pre-scoring motor: 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -max. Cutting height: 90° 100 mm / 45° 79 mm -Miter cut: up to 45° Guedpfez N Hqkox Agrei -Cutting width: 920 mm -Table length: -Overall dimensions: 2430/1810/H1030 mm -Weight: 390 kg

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm Godpfx Ags Afwxlsreui N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Gjdpfx Aozzdyuegroui

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, working width 410mm tables lenght 2630mm Guodpfs Aay Uiex Agroi 4-knives shaft motor with brake horizontal drill included drill table 250x570mm year 2001

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected -Accessories: see pictures -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm Gedpsz Rxb Refx Agrsui -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: like new (used), functionality: fully functional, spindle diameter 35mm 5 speeds from 3000 to 10,000 rpm motor power 5.5 kW Maggi feed system with 4 rollers and adjustable speed indexing carriage with a graduated scale for angle adjustment table 120x730 cm 760 kg year of manufacture: 2001 DTR manual – YES CE marking – YES guard for mortising AIGNER table tops Guedpfx Aezx U Nusgrsi 4 feed speeds turret for adjusting milling depth option to purchase without the feed system external dimensions: 2550x1700x1660

Condition: used, Year of construction: 2000, functionality: fully functional, – very good condition – Italian manufacture – year of production: 2000 TECHNICAL PARAMETERS: Gusdjxl D Nqspfx Agrji SURFACE PLANER: – working width: 410 mm – number of knives: 3 pcs – infeed table dimensions: 1030 x 410 mm – outfeed table dimensions: 930 x 410 mm – adjustable fence – noise-reducing comb THICKNESSER: – planing height: 3–230 mm – shaft diameter: 72 mm – shaft speed: 5300 rpm – table size: 700 x 410 mm – feed speed: 7 m/min – main motor: 4 kW – machine dimensions (L/W/H): 200 / 90 / 120 cm – weight: 400 kg

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Gedozzx Iyspfx Agrsui Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Type: Minimax E10 Year of manufacture: 2019 Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Guodpjzuykpsfx Agrei Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Gujdpfehp Rcyex Agroi Aluminum fence cheek

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: KK00054470, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 612 kg, Equipment: CE marking, documentation/manual, SCM Minimax me 35 TR edge banding machine in CE version, manufactured in 2026. Equipped with a glue scraping unit with an automatic on/off system, a scraper with an automatic on/off system, a sawing unit with an automatic on/off system, internal machine lighting, an infrared lamp, and nesting copier kits for the routing unit and the band scraper. Guedpo Agniusfx Agrji

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls Gjdpj Ah Simofx Agrsui • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 4,120 kg, input voltage: 400 V, type of input current: three-phase, We are offering for sale a lightly used SCM WINDOR 20 window machining center with a mortise head, manufactured in 2007. It offers high precision, fast routing and profiling. This machine has a space-saving design, making it an ideal choice for small and medium-sized businesses for the production of custom and series wooden windows and doors. Currently equipped for processing profiles 68 and 78. It can be tested and inspected by prior arrangement. Manufacturer: SCM Model: WINDOR 20 Year of manufacture: 2007 Serial number: 882/000130 Weight: 4120 kg Rated voltage: 400 V Number of phases: 3 Rated current: 82 A Guedpfs Aicczjx Agrsi Frequency: 50/60 Hz Short-circuit current: 10 kA If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander Gueds Afbuhspfx Agroi 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, operating hours: 30,600 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 110 mm, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 2,900 kg, table length: 2,700 mm, table width: 1,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It has a working area of 2700 x 1200 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking for high-quality CNC processing capabilities, Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min Vector speed: 40 m/min Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) Main spindle: HSK-63 Gusdpe Ahukiofx Agrei Tool magazine: FAST CHANGE 4 POSITION Tool magazine: BACK CHANGE 4 POSITION Machine Height: 2680 mm Machine Length: 5570 mm Machine Weight: 2900 kg Machine Width: 2500 mm Number of Axes: 3 Spindle Power: 6.6 kW Spindle Speed: 18000 RPM X-axis Travel: 2980 mm Y-axis Travel: 1280 mm Z-axis Travel: 200 mm

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Maximum chip removal 4 mm Thickness table length 605 mm Gjdoiiynnjpfx Agrjui Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDED OPTIONS - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: used, Year of construction: 2022, machine/vehicle number: AH00003901, functionality: fully functional, input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 60 mm, height adjustment type: electric, actuation type: electric, overall weight: 2,650 kg, Equipment: CE marking, documentation/manual, used SCM Stefani KD edgebander in HP configuration, year 2022. The machine is in excellent condition and can be seen running. Units: RT/E pre-milling unit with diamond cutters (H 64 mm) Gujdps Aifpwjfx Agrei VC800 gluing unit with pre-heating for EVA glue Automatic edge feed from coil and strips K/SEL end trimming unit, tilting 0–15° R-HP Multiedge tilting trimming unit for 2 radii (4-axis positioning) Round K corner rounding unit R-HP Multiedge radius scraper for 2 radii and RAS/V scraper RCA/2C flat scraper Buffing brushes Additional equipment: Startouch 12" control, ready for a barcode reader Top pressure belt instead of wheels, which protects matt and gloss panels Easy Size (automatic infeed fence positioning) Spray units for anti-adhesive, cleaning and gliding agents Infrared ceramic lamp 1700 mm extendable support for workpieces up to 2200 mm wide Copying wheel kit for nesting panels CE Technical data: Feed speed: 10–20 m/min Panel thickness: 8–60 mm Coil edges: up to 3 × 45 mm Solid wood edges: up to 8 mm

Condition: like new (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 120 mm, milling spindle length: 140 mm, cutting width (max.): 230 mm, overall weight: 1,421 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, type of input current: three-phase, Strugarka czterostronna SCM COMPACT P z 2006 roku, wyprodukowana we Włoszech. Maszyna przeznaczona do strugania, kalibrowania oraz profilowania elementów z drewna litego. Obróbka czterech stron w jednym przejściu sprawdzi się przy produkcji listew, kantówek i elementów stolarskich. Solidny stalowy korpus, długi stół podawczy oraz zamknięta obudowa strefy obróbczej. Gjdpfx Agj Ahgkhereui PARAMETRY TECHNICZNE: – szerokość robocza: 25–230 mm, – wysokość robocza: 6–120 mm, – minimalna długość elementu: 450 mm, – 4 wrzeciona: dolne, prawe, lewe i górne, – prędkość obrotowa wrzecion: 6 000 obr./min, – średnica wrzecion: 40 mm, – prędkość posuwu: 6–12 m/min, – długość stołu podawczego: 2 000 mm, – średnica rolek posuwowych: 140 mm, – długość robocza wrzecion pionowych: 140 mm, – długość robocza wrzecion poziomych: 250 mm, – głębokość profilowania na wrzecionach pionowych: do 20 mm. MOCE SILNIKÓW WEDŁUG KATALOGU: – dolny wał strugający: 4 kW, – wrzeciona pionowe: 5,5 kW, – górne wrzeciono poziome: 4 kW, – posuw: 0,75 kW. DANE TEGO EGZEMPLARZA Z TABLICZKI: – rok produkcji: 2006, – numer seryjny: AB/180894, – masa: 1 421 kg, – zasilanie: 400 V, trójfazowe, – częstotliwość: 50 Hz, – prąd znamionowy: 46 A, – oznaczenie CE. WYPOSAŻENIE: – stół podawczy z prowadnicą wzdłużną, – obudowa ochronna z oknem kontrolnym, – panel sterowania, – wyłącznik awaryjny, – manometry i regulatory ciśnienia, – wskaźniki położenia przy regulacji, – króćce do podłączenia odciągu.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support Gujdpfe Afnhhjx Agrsi - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: used, machine/vehicle number: 008472, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Gusdpfxj Akhn Io Agrji Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, Year of construction: 2000, Working width: 230 mm Working height: 130 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top, top, bottom Motor power, bottom spindle: 5.5 kW Motor power, right spindle: 5.5 kW Motor power, left spindle: 5.5 kW Motor power, top spindle: 5.5 kW Adjustment, right spindle: hand crank Adjustment, left spindle: hand crank Adjustment, top spindle: hand crank Planing heads: Tersa Feed rate: infinitely variable Feed roller pressure: mechanical Gusdpfxe Ai Em Ts Agrei Current consumption: 45A Power consumption: Motor brake: automatic Dust extraction port: Machine length: 4000 Machine width: 1700 Weight: 1500